Specifications

–262–
SURVEILLANCE
PRODUCTS
6-1. Time lapse video recorders
SVT-S3050P
S-VHS Time Lapse Videocassette Recorder
•High horizontal resolution of 400 TV lines using S-VHS
format •Excellent signal-to-noise ratio of 45 dB •7 different
time lapse recording/playback modes are available in
addition to the standard mode (3-hour time mode) with a
normal 180-minute tape
Note : In time lapse mode, it is possible to additionally record three hours
longer than original modes.
•Adaptive Picture Control (APC) delivers optimum picture
quality to the recording image •A tape recorded in the 3-hour
mode can be played back by any S-VHS or VHS VTR •Audio
recording and playback are possible in 3, 12 and 24-hour
modes •Built-in time and date generator allows time and date
information to be displayed along with the Alarm count and
Recording/Playback speed •Various recording modes such
as Auto Repeat Recording, Timer Recording and Alarm
Recording for versatile situations •Holiday setting function
•Daylight Saving Time setting function •Quick recording
check function •By using alarm recall and scan functions,
pictures recorded during alarm mode can be easily checked
•Field-by-field picture playback capability •External timer
input capability •Automatic clock adjusting is possible when
several VTRs are connected •On-screen display permits
easy-to-follow operation •Auto head cleaning function •Tape
before-end signal output/Tape-end output capability
•Warning signal output capability •Buzzer setting function
•Power-failure protection for up to 30 days •Security lock
function for avoiding accidental operation errors •External
control capability via an optional RS-232C interface •Remote
control capability of basic operational functions through ø3.5
mm mini jack (optional Remote Control Unit SVT-RM10)
Supplied Accessories: AC power cord (1)
Operation manual (1)
Optional Accessory: RS-232C interface board SVT-RS1A
Remote control unit SVT-RM10
TLV parts kit TPK-885P
Specifications
General
Tape format: S-VHS or VHS
Power requirements: AC 220 to 240 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 5°C to 40°C (41°F to 104°F)
Operating humidity: Less than 80%
Dimensions: 420 (W) × 100 (H) × 340 (D) mm
(16
5
/8 × 4 × 13
1
/2 inches)
Mass: Approx. 5.8 kg (12 lb 9 oz)
Tape speed: 23.39 mm/sec (3-hour mode)
Recording/playback time:3, 12, 24, 48, 72, 96, 120 and 168 hours
(with an SE/E-180 tape)
Alarm recording speed: 3, 12-hour mode, NC*
1
Alarm recording duration:20 s, 1 m, CC*
2
Fast forward/rewind time:Approx. 4 minutes (with an SE/E-180 tape)
Video
Recording system: Rotary four-head helical scanning system
Luminance signal: FM recording
Colour signal: Low-pass band-pass transformation
direct recording
Input: BNC: 1.0 Vp-p, 75 Ω, unbalanced
S-VIDEO: Mini DIN 4-pin
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
Output: BNC : 1.0 Vp-p, 75 Ω, unbalanced
S-VIDEO: Mini DIN 4-pin
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, at burst level, 75 Ω
TIME MODE (h) 3 1224487296120168
INTERVAL (s) 1/50 0.1 0.18 0.34 0.5 0.66 0.82 1.14
Horizontal resolution: Colour mode : More than 400 TV lines (S-VHS)
Black & White mode: More than 400 TV lines
(S-VHS)
Signal-to-noise: 45 dB (S-VHS)
Audio
Audio recording mode: 3, 12 and 24-hour mode
Input: –7.8 dBu, 47 kΩ (phono jack)
Output: –7.8 dBu, 600 Ω (phono jack)
Microphone input: –60 dBu, 600 Ω (ø3.5 mm mini jack)
Others
Alarm input: Low level
Alarm output: +5 V, 5.7 kΩ (Low active)
Switch output: +5 V, 5.7 kΩ (Low active)
Tape end output: +5 V, 5.7 kΩ (Low active)
Warning output: +5 V, 5.7 kΩ (Low active)
Timer output: +12 V, 5.7 kΩ (High active)
External timer input: Low level
Clock set input: Low level
Clock set output: +5 V, 5.7 kΩ (Low active)
Series input: Low level
Series output: +5 V, 5.7 kΩ (Low active)
Control terminals: ø3.5 mm mini jack
Optional RS-232C interface (D-sub 9-pin)
*1 No change of recording speed
*2 Duration of alarm recording continues for as long as alarm input remains active.
0 dBu = 0.775 Vrms