Specifications

2-2 DVCAM VTR accessories
–25–
DSBK-180P
Dual Video Input Board
(for DSR-70P)
This board enables two cameras to be
connected to the DSR-70P via analogue
composite with reference video signal. The
output of either one is selected to be
recorded.
Supplied accessory: Operation Manual
DSBK-190
i.LINK/DV Input/Output Board
(for DSR-2000P)
This board enables frame accurate editing
between the DSR-2000P and the
DSR-500WSP DVCAM Camcorder,
DSR-70P DVCAM Portable Editing
Recorder or a consumer DV camcorder*
1
via i.LINK interface.
This i.LINK interface treats compressed DV
audio/video and control signals, which allow
the single cable connection with no
deterioration of video and audio quality.
Connector: Input/Output: 6-pin (1)
Supplied accessories:
Connector cap (1)
Operation manual
*1 Sony DV camcorders only
DSBK-200
Control Panel (for DSR-2000P)
Designed to remotely control the
DSR-2000P from a distance of up to 10
metres (approx. 33 ft.).
DSRM-10
Remote Control Unit
•Designed to remotely control the
DSR-85P/80P/60P •Provides wired remote
control operation for
STOP/REC/PAUSE/REW/PLAY/FFWD
•JOG/SHUTTLE operation •Enables ±16
times normal speed in search operation
Specifications
Power requirements: DC 5 V (supplied from the
connected VTR)
Power consumption: 50 mW
Remote control: Stereo mini-plug (with
attached cable, length 3 m
(10ft))
Dimensions: 90 (w) × 46 (h) × 182 (d)
mm
(3
5
/8 × 1
13
/16 × 7
1
/4 inches)
Mass: Approx. 360 g (12oz)
Supplied accessory: Operating instructions
VIDEOCASSETTE
RECORDERS