Specifications

2-2 DVCAM VTR accessories
–27–
BKNW-225
Docking Kit
This docking kit enables two DSR-70P units
or the DSR-70P and DNW-A25P to be
docked together. This configuration
provides VTR-to-VTR editing with
Jog/Shuttle dial operation.
Supplied accessories:
Carrying Handle (1)
BNC Cable (34 cm/1.1 ft) (1)
9-pin Remote Cable
(34 cm/1.1 ft) (1)
Joint Panels with Screws (3)
LC-DN220
Carrying Case (Hard type)
•Carrying case for two DSR-70P units or
the DSR-70P and DNW-A25P
DSRM-E1P
Edit Adaptor
•Direct connection to the DSR-V10P via a 20-pin
connector •Controls LANC VTRs as players (DSR-
PD1P/ DSR-20P/ DSR-30P) •Built-in Jog/Shuttle dial
•Assemble editing with up to 99 events x 4 programmes
GENERAL
Power requirements: DC:7.2 V (supplied from the DSR-V10P)
DC:8.4 V (AC adaptor operation)
Power consumption: Approx. 1.8 W
Operating temperature:
0 °C to 40 °C (32 °F~104 °F)
Storage temperature: -20 °C to 60 °C (-4 °F~140 °F)
Mass: Main Unit: 160 g (5.6 oz)
Controller: 340 g (12 oz)
Dimensions:
Main Unit: 134.4 (W) × 69.2 (H) × 60.6 (D) mm
(5
3
⁄8 × 2
3
⁄4 × 2
1
⁄2 inches)
Controller: 128.1 (W) × 184 (H) × 42 (D) mm
(5
1
⁄8 × 7
1
⁄4 × 1
11
⁄16 inches)
CONNECTORS
DSR-V10P: 20-pin
Control Unit: Mini DIN 8-pin
LANC: Stereo mini-mini jack
MONITOR OUTPUT
Video Output: Composite (RCA phono jack (1)):
1.0 V p-p, 75 Ω, unbalanced, sync
negative
Audio Output: RCA phono jack (2) (L, R):
327 mV, impedance 470 Ω or less
VIDEOCASSETTE
RECORDERS