Specifications

2 CD Players
CDP-D500
CD Player
•Jog Shuttle Dial for CD frame accurate cueing •CD TEXT
format compatibility for various CD TEXT information (Disc
title, Track title, etc) to be read out via RS-232C port •Last
cue memory function can be utilized by Cue/stdby button
•Built-in DIN 8-pin remote control connector for fader
start/stop from a mixing console •Built-in Word sync input
with wide lock range (44.1 kHz ±12.5%) •Index cueing
capability •Variable speed playback (±12.5% in 0.1% steps)
•Auto cue playback for rapid start from a point where
modulation is detected (signal detection level is adjustable)
on disc •Adjustable (1 to 9 seconds) Auto fade on the front
panel •Direct track access on the front panel •Built-in digital
outputs conforming to AES/EBU and Unbalanced (IEC-958)
formats •Accommodates both 8 cm (3-inch) and 12 cm (5-
inch) compact discs
Supplied Accessories: Wireless remote commander RM-D500 (1)
AC power cord (1)
Screws (M5 x 12) (4)
Decorative washers (4)
Specifications
Frequency Response: 5 Hz to 20,000 Hz
Signal-to-noise Ratio: More than 100 dB (20,000 Hz LPF IHF-A
Weighted)
Dynamic Range: More than 98 dB
T.H.D.: Less than 0.004% (at 1 kHz, 0 dB 20 kHz LPF)
CH Separation: More than 100 dB (at 1 kHz to 20 kHz LPF)
Analog Output:
XLR-3
Output Impedance: 100
Max. Output Level: +24 dBu
Load Impedance: 10 k
RCA Phono
Output Impedance: 200
Max. Output Level: +9 dBu
Load Impedance: 10 k
H.P.(RCA Phone)
Output Impedance: 150
Max. Output Level: 15 mV
Load Impedance: 32
Digital Output:
AES/EBU (XLR-3)
Output Impedance: 35
Output Level:
Adaptable Load Impedance:
110
IEC-958 (RCA Phono)
Output Impedance: 75
Output Level: 0.5 p-p
Adaptable Load Impedance:
75
Word Sync Input:
Input Impedance: 22 k/75 Switchable (BNC)
Input Level: 2 Vp-p (TTL)
Lock Range: 44.1 kHz+12.5% (38.59 kHz to 49.6 kHz)
Remote Interface: Parallel DIN 8-pin (2 modes)
Serial RS-232C (D-sub 9-pin)
Dimensions: 482 (W) × 145 (H) × 335 (D) mm
(19 × 7
7
8 × 14
7
8 inches)
Mass: 7.1 kg (15 lb 10 oz)
–289–
AUDIO
EQUIPMENT