Specifications
AUDIO
EQUIPMENT
–301–
3-1 Wired Microphones
F-780
Dynamic Microphone
+20
+10
0
-10
-20
-30
20 50 100 200
500 1K
2K 5K 10K 20K
Hz
0°
90°
180°
Frequency Response Characteristics
Response (dB)
Frequency (Hz)
Uni-Directional
Directivity Characteristics
100Hz
1KHz
6KHz
0°
30°
60°
90°
120°
150°
180°
150°
120°
90°
60°
30°
0dB
- 5
- 10
- 15
- 20
•For vocal recording •Rugged capsules in a resilient body
structure •Special AlNiCo Magnet •High quality edgewise
winding CCAW (Copper Clad Alminium Wire) voice coil
•XLR-3-12C type connector •Frequency response: 50 to
18,000 Hz •Dimensions: 51 mm dia. x 165 mm (2
1
⁄8 inches
dia. x 6
1
⁄2 inches) •Mass: 290 g (10.2 oz)
Specifications
*
1
Without the battery for condenser and electret condenser microphones.
*
2
The F-115(CE7) is suitable for use with TC-D5 PROII. The F-115(CE) is suitable for use with TC-D5 PRO.
F-710 F-720 F-730 F-740 F-780
F-115*
2
(CE7) (CE)
Capsule Type Dynamic Dynamic Dynamic Dynamic Dynamic Dynamic
Frequency Response
70 to 15,000
Hz
50 to 13,000
Hz
50 to 13,000
Hz
50 to 18,000
Hz
50 to 18,000
Hz
40 to 12,000
Hz
Directivity UNI UNI UNI UNI UNI OMNI
Effective Output
Level at 1 kHz, -56.0 dBm -60.0 dBm -59.0 dBm -56.0 dBm -55.0 dBm -57.8 dBm
(0 dBm=1 mW/1 Pa.)
Sensitivity
-54.0 dB± 3.0 dB -57.0 dB± 3.0 dB -56.0 dB± 3.0 dB -54.0 dB± 2.0 dB -53.0 dB± 2.0 dB -54.0 dB± 2.0 dB
(0 dB=1 V/1 Pa., at 1 kHz)
Output Impedance at
1 kHz (balanced)
400 Ω ±20% 500 Ω ±20% 500 Ω ±20% 400 Ω ±20% 400 Ω ±20% 600 Ω ±20%
Induction Noise from
Ext. Magnetic Field
≤ 5 dB SPL ≤ 10 dB SPL ≤ 10 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL ≤ 5 dB SPL
(dB SPL/1 x 10
-7
T)
(0 dB SPL + 2 x 10
-5
Pa.)
Wind Noise
≤ 55 dB SPL ≤ 55 dB SPL ≤ 45 dB SPL ≤ 50 dB SPL ≤ 50 dB SPL ≤ 40 dB SPL
(0 dB SPL + 2 x 10
-5
Pa.)
Microphone Connector XLR-3-12C type XLR-3-12C type XLR-3-12C type XLR-3-12C type XLR-3-12C type —
Supplied Cable — — — — — XLR-3-12C XLR-3-11C
Cable Length — — — — — 6 m (19.7 feet)
Available Receptacle XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type XLR-3-11C type
XLR-3-12C type
Supplied Mic Holder Yes Yes Yes Yes Yes Yes
SAD-700 Optional Mic Holder
Yes— —YesYes —
Stand Screw/
PF
1
/
2
-inch thread PF
1
/
2
-inch thread PF
1
/
2
-inch thread PF
1
/
2
-inch thread PF
1
/
2
-inch thread PF
1
/
2
-inch thread
Mic Holder Screw
Supplied Stand Adaptor NS
5
/8-inch thread NS
5
/8-inch thread NS
5
/8-inch thread NS
5
/8-inch thread NS
5
/8-inch thread NS
5
/8-inch thread W
3
/8-inch
W
3
/8-inch thread W
3
/8-inch thread W
3
/8-inch thread W
3
/8-inch thread W
3
/8-inch thread W
3
/8-inch thread thread
Mounting on A-12
(Available screw
Yes Yes Yes Yes Yes Yes
PF
1
/2-inch thread
U
5
/16-inch thread)
Mounting on A-25
(Available screw
Yes Yes Yes Yes Yes Yes
U
5
/16-inch thread
PF
1
/2-inch thread)
Mounting on A-25N
(Available screw Yes Yes Yes Yes Yes Yes
NS
5
/8-inch thread)
Mounting on CRS-3P Yes Yes Yes Yes Yes Yes
Dimensions
mm 54 dia. x 177 37.6 dia. x 160 44.4 dia. x 166 51 dia. x 165 51 dia. x 165 Max. 30 dia. , 24.6 dia. x 173
inch 2
1
/4 dia. x 7 1
1
/2 dia. x 6
3
/8 1
3
/4 dia. x 6
5
/8 2
1
/8 dia. x 6
1
/2 1
1
/8 dia. x 6
1
/2
31
/32 dia. x 6
7
/8
Mass*
1
250 g 260 g 250 g 290 g 290 g 270 g
8.8 oz 9.2 oz 8.8 oz 10.2 oz 10.2 oz 9.5 oz
Supplied Accessories
Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1) Microphone holder (x 1)
Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2) Stand adaptor (x 2)
Wind screen (x 1)
Microphone case (x 1)
Remarks — — — — — —
F-Series