Specifications
–318–
1. Peripheral Equipment
VCS-1000
Video Selector
•For use in combination with the SVRM-960 Bi-directional
remote controller for high quality picture monitoing
•Minimizes the signal reflections caused by long cable runs
•Up to 20 SVO-965P units equipped with the SVBK-902
optional Bi-directional interface board can be connected to a
single VCS-1000 •Loop-through output is provided for
connection of up to 50 VCS-1000 units •19-inch EIA rack
mountable in various directions •On-Line indicator •When
the power is turned off, the LINE OUT becomes a loop-
through output of the LINE IN for easy maintenance
Supplied accessories: Mounting brackets (EIA 2U width × 2, DIA 3U width × 2)
AC power cord
Operation manual
Specifications
General
Mass: Approx. 4kg (8 lb 13 oz)
Dimensions: 424(W) × 88(H) × 132(D)mm
(16
3
/4 × 3
1
/2 × 5
1
/4 inches)
Power requirements: AC 220 to 240V, 50/ 60Hz
Power consumption: 8.5W max.
Maximum number of VTR connection:
20 units
Video
Video signal system: EIA/CCIR monochrome, NTSC/PAL colour
Frequency response: 6MHz, 100kHz reference
S/N ratio: More than 54dB
Audio
Frequency response: 20Hz to 20kHz, 1kHz -10dBu standard
S/N ratio: More than 85dB
RF video
Frequency response: 6MHz
S/N ratio: More than 54dB
Video inputs/outputs
Video in (from SVO-965P):
BNC (×20), 1Vp-p, sync negative, 37.5Ω, unbalanced
Line in video (from previous VCS-1000):
BNC, 1Vp-p, sync negative, 75Ω unbalanced
Line out video (to SVRM-960 or next VCS-1000):
BNC, 1Vp-p, sync negative, 75Ω unbalanced
Control inputs/outputs
Control input (from SVO-965P): BNC (×20)
Rx*
1
input: 1Vp-p, 37.5Ω unbalanced
Tx*
2
output: 1.4Vp-p, 37.5Ω unbalanced
Line in control (from previous VCS-1000):
BNC,
Tx intput: 1Vp-p, 37.5Ω, unbalanced
Rx output: 1Vp-p, 37.5Ω, unbalanced
Line out control (to SVRM-960 or next VCS-1000):
BNC,
Tx input: 1Vp-p, 37.5Ω unbalanced
Rx output: 1Vp-p, 37.5Ω, unbalanced
RF
RF IN (from the SVO-965P):
BNC (×20), 1Vp-p, 37.5Ω, unbalanced
Line IN RF (from previous VCS-1000):
BNC, 1Vp-p, 75Ω, unbalanced
Line Out RF (to SVRM-960 or next VCS-1000):
BNC, 1Vp-p, 75Ω unbalanced
Audio inputs/outputs
Audio Input (from SVO-965P):
Phono (2-channel × 20), high impedance, unbalanced
Line In audio (from previous VCS-1000):
Phono (2-channel), high impedance, unbalanced
Line Out audio (to SVRM-960 or next VCS-1000):
Phono (2-channel), high impedance, unbalanced
*1: Rx: Signal output from the SVRM-960
*2: Tx: Signal output from the SVO-965P
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES