Specifications

–319–
S
VCS-63A
Video and Audio Selector
•A video and audio (stereo) signal can
be selected from the six video and
audio sources.
•Equipped with the loop-through out
connectors for each input signal.
•When two or more selectors are
connected in parallel, using the loop-
through capability, a camera or VTR
signal can be selected
independently.
•Can be mounted into a 19-inch EIA
standard rack using the supplied rack
mount adaptor.
Dimensions:
Approx. 424(W) × 44(H) × 170(D)mm
(16
3
/4 × 1
3
/4 × 6
3
/4 inches)
Mass: Approx. 3kg (6 lb 10 oz)
Connectors: VIDEO IN/OUT—BNC type
AUDIO IN/OUT—PHONO
Supplied accessories:
Rack mount adaptor × 2
Screw for rack mounting × 4
SRP-12DAR
RGB Distribution Unit
•Provides AV applications including PC cost
effective and high performance analog RGB
distribution •One analog RGB signal is
distributed into two signals and monitor
signal(total three) •Monitor signal is routed
through the D-sub 15p connector to monitor
display •Wide frequency response of up to
250 MHz(BNC output) •Compact and
durable enclosure is available
Inputs
Connector: BNC
RGB level: 0.7 Vp-p
RGB impedance:
75 Ω
Hs/Cs level: 1 V-4 Vp-p
Hs/Cs impedance:
47 kΩ (High impedance)
Hs/Cs sync: Positive/negative
Vs level: 1 V-4 Vp-p
Vs impedance:
47 kΩ (High impedance)
Outputs 1, 2
Connector: BNC
RGB level: 0.7 Vp-p
Hs/Cs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
Monitor out
Connector: D-sub 15p
RGB level: 0.7 Vp-p
Hs/Cs level: 1 Vp-p /75 Ω, 4 Vp-p/high
impedance
Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
Electoric characteristics
RGB bandwidth
Output 1, 2: 40 Hz to 250 MHz+3/-3 dB
Monitor out: 40 Hz to 200 MHz+3/-3 dB
Gain difference between RGBs:
0.2 dB
Delay between RGBs:
Less than 1 ns
General
Power requirements: Power plug converter for
120 V
Power consumption: 4 W
SRP-200DA
AV Distribution Amplifier
•Can distribute an AV input signal in
five ways •The 75Ω terminator of the
video input is automatically
disconnected when a cable is connected
to the stacking terminal. Up to four
units can be connected in parallel
•Can be mounted into a 19-inch EIA
standard rack
General
Dimensions: 482(W) × 44(H) × 175(D)mm
(19 × 1
3
/4 × 7 inches)
Mass: 2.5kg (5 lb 8 oz)
Power requirements:
AC 120V, 230V, 50Hz/60Hz
Power consumption:
5W
Operating temperature:
0 to 40°C (32 to 104°F)
Storage temperature:
-20 to +60°C (-4 to +140°F)
Video
Frequency responce:
100 kHz to 10 MHz, -0.5dB
DG: Less than 0.5%
DP: Less than 0.4°
Input: 75Ω/high impedance
(high impedance at stacking output)
BNC connector x1
Outputs: 75Ω, BNC connector ×5
(high impedance at stacking output)
Audio
Frequency response:
20Hz to 20kHz
Harmonic distortion:
Less than 0.005%
Inputs (one stereo)
Reference level:
-10dBu
Max. level: +10dBu
Impedance: 47kΩ
Type: Phono jack
Circuit: Unbalanced
Outputs (five stereo)
Reference level:
-10dBu
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
1. Peripheral Equipment
ON
OFF
75Ω
IN - 1
ON
OFF
75Ω
IN - 2
ON
OFF
75Ω
IN - 3
ON
OFF
75Ω
IN - 4
ON
OFF
75Ω
IN - 5
ON
OFF
75Ω
IN - 6
OUT
R
L
IN - 1
IN - 2
IN - 3
IN - 4
IN - 5
IN - 6
OUT
Max. level: +10dBu
Impedance: 47Ω
Type: Phono jack
Circuit: Unbalanced