Specifications
1. Peripheral Equipment
–320–
VCS-500
Video and audio switcher with
blanking switch facility
•The system using the VCS-500 can operate
synchronically with the external sync or the
video signal connected to the VIDEO IN-1
connector. The signal can be switched in
the blanking portion so that switching noise
is eliminated
•Up to five video and audio signals can be
controlled
•Remote control is possible when an RM-
V5 VTR selector is used
•DUB circuit switching function
•Can be mounted into 19-inch EIA
standard rack
Inputs: Video—1Vp-p of rating, 75Ω,
unbalanced, sync negative
Sync—3V ±1Vp-p, 75Ω,
unbalanced, negative
Audio—LINE IN CH-1/CH-2,
-5dB of rating, 47kΩ
Outputs: Video—Rated input ±0.2Vp-p,
75Ω, unbalanced, sync negative
Sync—3V ±1Vp-p, 75Ω,
unbalanced, negative
Audio—LINE OUT CH-1/CH-2,
rated input ±2dB, 47kΩ
Frequency response:
Video ±1dB (up to 6MHz)
Audio 50 to 15,000Hz ±1dB
Connectors:
VIDEO IN/OUT—BNC
SYNC IN/OUT—BNC
AUDIO IN/OUT—Phono
REMOTE IN/OUT—20-pin
DUB IN/OUT—7-pin
Power requirements:
AC 100/110/120/127/220/240V
±10% (selectable), 50/60Hz
Power consumption:
20W
Dimensions:
480(W) × 87(H) × 280(D)mm
(19 × 3
1
/2 × 11
1
/8 inches)
Mass: 7kg (15 lb 7 oz)
Supplied accessories:
AC power cord
Screw for rack mounting
DA-1400
Video/audio distributor
•Two video/audio inputs and fourteen
distribution outputs •Four distribution
patterns are available: Input signal A (1 to
14 ch), Input signal B (1 to 14 ch), Input
signal A (1 to 7 ch)/Input signal B (8 to 14
ch), Input signal B (1 to 7 ch)/Input signal A
(8 to 14 ch) •Loop-through output
connector for each input signal to expand
the connection with other DA-1400s
•Video/audio level meters for adjusting and
confirming the output signal levels •Audio
input level selector (-10dB/-6dB) •19-inch
EIA standard rack mountable
Supplied accessories:
AC power cord
Mounting brackets
(EIA 2U width: 1 pair)
Operation manual
General
Mass: 6kg (13 lb 23 oz)
Dimensions: 424(W) × 88(H) × 350(D)mm
(16
3
/4 × 3
1
/2 × 13
7
/8 inches)
Power requirements:
AC 220 to 240V, 50/60Hz
Power consumption:
16W
Video
Inputs: Loop-through, BNC (×2), 1Vp-p,
75Ω, sync negative
Outputs: BNC (×14), 1Vp-p, 75Ω, sync negative
S/N ratio: Better than 60dB
Frequency response:
10MHz ± 1dB
Audio
Inputs: Loop-through, Phono (2-channel) (×2)
Input level: –10dBu/–6dBu
switchable, 50kΩ
Outputs: Phono (2-channel) (×14)
Output level: –10dBu/–6dBu,
100Ω
S/N ratio: Better than 70dB at 600Ω
Frequency response:
20Hz to 20kHz ±1dB
Distortion: Less than 0.1%, -10dBu at 1kHz
DA-500
Colour and monochrome
video/audio distributor with DUB
connectors
•Five Video/DUB/Audio outputs and one
direct output
•DUB connectors are furnished so that a
high quality video signal will be obtained
•Up to four DA-500s can be connected in
series so that the input signal can be divided
into as many as 20 separate signals
•Can be mounted into 19-inch EIA
standard rack
Inputs: Video—1Vp-p of rating, 75Ω,
unbalanced, sync negative
Audio—LINE CH-1/CH-2, -5dB
of rating, 47kΩ, unbalanced
Outputs: Video—OUT 1 to 5, Rated input
±0.2Vp-p, 75Ω, unbalanced,
sync negative
Audio—LINE CH-1/CH-2, Rated
input ±2dB, 47kΩ
Connectors: VIDEO IN/OUT, DIRECT OUT—BNC
AUDIO IN/OUT, DIRECT OUT—Phono
Power requirements:
AC 100/110/120/127/220/240V
±10% (selectable), 50/60Hz
Power consumption:
20W
Dimensions: 480(W) × 87(H) × 280(D)mm
(19 × 3
1
/2 × 11
1
/8 inches)
Mass: 6.1kg (13 lb 7 oz)
Supplied accessories:
AC power cord
Screw for rack mounting
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
≥ AC IN
OUT
LINE
VIDEO
CH1/L
CH2/R
DUB
SYNC OUT
IN - 1
LINE
VIDEO
CH1/L
CH2/R
DUB
SYNC OUT
IN - 2
LINE
VIDEO
CH1/L
CH2/R
DUB
SYNC OUT
IN - 3
LINE
VIDEO
CH1/L
CH2/R
SYNC OUT
IN - 4
LINE
VIDEO
CH1/L
CH2/R
SYNC OUT
IN - 5
LINE
VIDEO
CH1/L
CH2/R
SYNC OUT
GROUP
SELECT
SYNC IN
IN
OUT
REMOTE
OUT
≥ AC IN
DUB
CH1/L
CH2/R
DIRECT-OUT
LINEDUB
CH1/L
CH2/R
OUT - 1
LINEDUB
CH1/L
CH2/R
OUT - 2
LINEDUB
CH1/L
CH2/R
OUT - 3
LINEDUB
CH1/L
CH2/R
OUT - 4
LINEDUB
CH1/L
CH2/R
OUT - 5
LINE
VIDEO
CH1/L
CH2/R
VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO
DUB LINE