Specifications

–35–
SVBK-150
Sony Digital Noise Reducer Board
(for SVO-9620 and SVP-9020)
•Reduces both Y (luminance) and C
(chrominance) noise with its YNR (noise
reducer) and CNR
•Provides Y Enhance function, TBS (Time
Base Stabilizer), and Field dropout
compensation
Dimensions: 318 (W) × 106 (H) × 26 (D) mm
(12
5
/8 × 4
1
/4 × 1
1
/16 inches)
Mass: 370 g (13 oz)
Supplied accessories:
Operation manual
SVBK-160
Sony Time Code Board
(for SVO-9620 and SVP-9020)
•Attaches to the SVBK-140 RS-422A
Interface Board
•When this board installed, the VTR can
record (SVO-9620 only) and read the EBU
time code
•Consists of the following components:
TC-69 board/Switch panel/Flat cable
Applicable time code:
SMPTE or EBU longitudinal time
code (LTC)
Drop frame (NTSC mode only):
Drop frame or non-drop frame
selectable
Dimensions: Board:
118.5 (W) × 85 (H) × 10 (D) mm
(4
3
/4 × 3
3
/8 × 1
3
/32 inches)
Panel:
85 (W) × 52.5 (H) × 13 (D) mm
(3
3
/8 × 2
1
/8 × 1
7
/32 inches)
Mass: Board: 80 g (2.8 oz)
Panel: 70 g (2.5 oz)
SVBK-170P
Component Output Board
(for SVO-5800P/SVP-5600P)
•When this board is installed, the VTR can
output component video signal
(Y/R-Y/B-Y), which conforms to the
Betacam SP format
Dimensions: 177 (W) × 105 (H) × 20 (D) mm
(7 × 4
1
/4 ×
3
/32 inches)
Mass: 120 g (4.2 oz)
SVBK-180P
RS-232C Interface Board
(for SVO-9620 and SVP-9020)
•Provides an RS-232C interface which
enables direct control of a VTR from an
external computer •Incorporates an EBU
standard time code generator/reader •Built-
in editing capability (insert/assemble) •Built-
in intelligence to support frame by frame
editing capability •Capable of changing its
communication protocol to the same as that
of the SVBK-120 Interface Board
Connector: RS-232C I/F: D-sub 25-pin (1)
Time Code out: BNC (1)
Time Code in: BNC (1)
Monitor out: BNC (1)
Dimensions: Board: 62 (W) × 115 (H) × 361 (D) mm
(2
1
/2 ×
5
/8 × 14
1
/4 inches)
Rear panel: 85 (W) × 52.5 (H) × 13 (D) mm
(3
3
/8 × 2
1
/8 × 1
7
/32 inches)
VIDEOCASSETTE
RECORDERS
3-2 S-VHS VTR accessories