Specifications

Audio performance
Frequency response
(20dB below peak level)*
2
50Hz to 15kHz
+1.5
–3.0
dB 50Hz to 15kHz ±3.0dB
S/N ratio (at peak level*
2
weighed CCIR 468-3) More than 68dB (Dolby NR ON) More than 62dB (Dolby NR ON)
Distortion (at 1kHz) at
operational level (4dBu) Less than 1.0% Less than 2.0%
Wow and flutter
(DIN45507) Less than 0.1% rms Less than 0.1% rms
Signal inputs
REF VIDEO IN (BNC): 1.0Vp-p, 75Ω
Signal outputs
VIDEO OUT 1 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
VIDEO OUT 2 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
VIDEO OUT 3 (BNC): Composite video, 1.0Vp-p, 75Ω, sync negative
with or without character insertion
COMPONENT OUT 1 (12-pin male)*
3
:
Luminance 1.0Vp-p, 75Ω, sync negative
Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
COMPONENT OUT 2 (BNC) (3)*
3
:
Luminance 1.0Vp-p, 75Ω, sync negative
Colour difference R-Y: 0.7Vp-p, 75Ω, B-Y: 0.7Vp-p, 75Ω
AUDIO LINE OUT (XLR 3-pin male) CH-1/2:
+4dBu, 600Ω, balanced
AUDIO MONITOR OUT (XLR 3-pin male) CH-1/2:
+4dBu, 600Ω, balanced
U-matic DUB OUT (with an optional BKW-2030):
Y: 0.5Vp-p, 75Ω, C: 0.5Vp-p, 75Ω
S-VIDEO OUT: Y: 1.0Vp-p, 75Ω, C: 0.3Vp-p (burst), 75Ω
TIME CODE OUT (BNC): 1.2Vp-p, 75Ω
*1 The specifications of “video/audio performance oxide tape” were measured by
playing back material on a standard PVW series VTR that had been recorded on
a standard BVW series Betacam SP VTR.
*2 Peak level: +8dB above operational level.
*3 Video amplitude 100/0/100/0 colour bars.
–4–
1-1 Betacam SP 2000PRO VTRs
PVW-2600P
Editing Player
•Superior picture quality, inherent in the Betacam SP
format •More than 100 minutes of playback time using the
L-size Metal or Oxide cassettes •High speed picture
search provides recognizable colour pictures at up to 10
times normal speed in forward and reverse (24 times in
monochrome) •Two longitudinal audio channels with the
Dolby C-type NR (Noise Reduction) system •RS-422A
9-pin interface with other RS-422A equipped Sony
machines (ex. Betacam/Betacam SP VTRs, DVCAM VTRs)
•Built-in Time Base Corrector with advanced high quality
digital dropout compensator •TBC remote control from an
optional UVR-60P •Built-in LTC/VITC/User Bits reader •Built-
in character generator •Enhanced serviceability with built-in
self-diagnostics •User friendly dial menu operation •Y/R-Y/B-Y
component signal outputs via BNC or 12-pin Betacam DUB
connectors •S-video (Y/C separate) output connector •7-pin
U-matic DUB output capability (option) •Compact and
lightweight (5 unit high, 19-inch rack mountable, approx. 24.5
kg/54 lb) •Low power consumption (120W)
Supplied accessories: AC power cord
Remote control cable RCC-5G (9-pin)
PSW 4
ç 16 screws for rack mounting (4)
Operation manual
Optional accessories: TBC Remote Controller UVR-60P
Component colour corrector BVX-10P
Control panel extention kit BKW-2010
U-matic DUB out kit BKW-2030
Control panel case BK-803
12-pin dubbing cable VDC-C5 (5 m)
Remote control cable RCC-5G/10G/30G
(5 m/10 m/30 m)
Rack mount kit RMM-110
S-video cable SYC-2/5 (2 m/5 m)
Specifications
General
Type: Editing player
Video recording system: Rotary 4 head helical scan
Luminance: FM recording
Chrominance: FM recording (CTDM recording)
Video Signal system: CCIR monochrome/PAL colour
Operating temperature: 5 to 40°C (41 to 104°F)
Storage temperature: –20 to 60°C (–4 to 140°F)
Power requirements: AC 198 to 264V, 48 to 64Hz
Power consumption: 120W
Humidity: Less than 80% (relative humidity)
Mass: Approx. 24.5 kg (54 lb)
Dimensions: 427 (W) × 237 (H) × 549 (D) mm
(16
7
/8 × 9
3
/8 × 21
5
/8 inches)
(including projecting parts)
Tape speed: 101.5 mm/s
Playback time: More than 100min with BCT-90MLA
More than 35min with BCT-30MA
Fast Foward/Rewind time:
Less than 3min with BCT-90MLA
Search speed:
SHUTTLE 19 steps, still to 24 times normal speed,
forward and reverse
JOG Frame by frame, forward and reverse
Video performance
Bandwidth:
Luminance
(50% modulation) 25Hz to 5.5MHz
+0.5
–4.0
dB 25Hz to 4.0MHz
+0.5
–6.0
dB
Colour difference
(50% modulation) 25Hz to 2.0MHz
+0.5
–3.0
dB 25Hz to 1.5MHz
+0.5
–3.0
dB
S/N ratio:
Luminance More than 48dB More than 46dB
Chrominance
AM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF)
PM More than 48dB (1.0MHz LPF) More than 48dB (0.5MHz LPF)
Differential gain Less than 3% —
Differential phase Less than 3° —
K-factor (2T pulse) Less than 2% Less than 3%
Y/C delay Less than 20ns Less than 20ns
Metal Particle Tape Oxide Tape*1
VIDEOCASSETTE
RECORDERS