Specifications
–58–
DSR-200AP
Digital Camcorder
•Compact and lightweight: 4.7 kg (10 lb 8 oz) including tape
and battery holder with three battery packs •DSP (Digital
Signal Processing) •Three 1/3-inch CCDs for accuracy of
colour reproduction •Superb picture quality of the DVCAM
format •Playback capability of consumer DV recorded tapes
(SP mode only) •Long recording time; up to 184 minutes with
a standard cassette* •Super SteadyShot™ (Optical) function
for stable picture shooting without sacrificing picture quality
•Time/date data superimposition on output pictures •Easy-to-
use viewfinder, with high horizontal resolution •Photo mode
and frame interpolation for recording clear frame picture for
seven seconds •Audio dubbing capability (32 kHz/12-bit only)
•Time code capability •i.LINK™ (DV In/Out) interface** based
on the IEEE1394 standard •LANC interface for simple editing
with a LANC-based recorder or editing system •RMT-
807/806 Remote Controller (supplied) for control of basic
functions
* The DSR-200AP accepts only standard DVCAM and DV cassettes.
** The model for European area has output only.
Supplied accessories: Wireless Remote Commander and R6 batteries (2)
RMT-807 (for European area)
RMT-806 (for PAL areas except Europe)
AV stereo cable
S cable
Lens cap
Shoulder pad
Side pad
Operation manual
Lithium battery CR2025
Optional accessories: ACC KIT-201 Accessory kit
AC-V900 AC adaptor/charger(with DK-715)
NP-F950 Rechargeable battery pack
NPA-10000 Battery adaptor
VMC-IL4415 i.LINK cable
VMC-IL4435 i.LINK cable
VMC-IL4615 i.LINK cable
VMC-IL4635 i.LIINK cable
Specifications
GENERAL
Power requirement: DC 7.2 V (Battery operation), DC 8.4 V (AC adaptor)
Power consumption: 11.6 W (during camera recording)
Operating temperature: 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature: -20 °C to 60 °C (-4 °F to 140 °F)
Dimensions (w x h x d): 216 × 237 × 474 mm
(8
5
⁄8 × 9
3
⁄8 × 18
3
⁄4 inches)
Mass: Approx. 3.6 kg (7 lb 15 oz)
(without batteries and tape)
Approx. 4.7 kg (10 lb 8 oz)
(with a tape and three NP-F950 in NPA-10000/B)
LENS PART
Zoom: 10:1 variable speed zoom lens(f = 5.9 to 59 mm)
(20 x Digital Zoom)
Filter diameter: 52 mm
Iris: Auto/Manual (F1.6 to 11) and Close
CAMERA PART
Image device: 3-chip 1/3-inch, Interline-Transfer CCD
Effective picture elements:
440,000 pixels, 752 × 582 (H × V)
Total picture elements: 470,000 pixels, 795 × 596 (H × V)
Signal system: CCIR standard, PAL colour system
Scanning system: 2:1 interlaced, 625 lines, 50 fields/sec.
Gain selection: Auto/Manual (-3, 0, 3, 6, 9, 12, 15, 18 dB)
Shutter speed selection: Auto/Manual (1/3, 1/6, 1/12, 1/25, 1/50, 1/100, 1/215,
1/425, 1/1000, 1/1750, 1/3500, 1/10000 sec.)
White balance: ATW/One-push auto/5800 K/3200 K
Minimum illumination: 3 lx
Recommended illumination:
More than 100 lx
Viewfinder: 1-inch black and white CRT
Built-in microphone: One-point stereo-type electret condenser
microphone directivity selectable (0°/90°/120°)
Built-in speaker: Dynamic speaker
VTR PART
Tape speed: Approx. 28.2 mm/s.(DVCAM mode)
Maximum recording time:
184 minutes (with PDV-184ME)
VIDEO CAMERAS
Video signal: CCIR standard, PAL colour system
Audio signal: REC: 48 kHz/16-bit, 32 kHz/12-bit,
PB:48 kHz/16-bit, 32 kHz/12-bit,
32 kHz/16-bit, 44.1 kHz/16-bit
INPUT/OUTPUT connectors
Audio input:
XLR 3-pin (2) (MIC/LINE selectable) Stereo mini jack (1)
Video outputs: Composite: BNC (1), RCA pin jack (1), 1.0Vp-p,
75 Ω Sync negative
S-Video: 4-pin mini-DIN connector (1)
Y: 1.0 Vp-p, 75 Ω unbalanced
C: 300 mVp-p (subcarrier burst), 75 Ω, unbalanced
Audio output: RCA PIN jack (2) (L, R)
Digital input/output: i.LINK(DV IN/OUT), IEEE1394-based, 4-pin (1)
*The model for European area has output only.
LANC: Stereo mini-mini jack (1)
Headphone: Stereo mini jack (1)
RFU DC output: Special mini jack (1) (DC 5 V)
External DC input: 4-pin for DK-715 cable
Viewfinder interface: 8-pin connector
1. Production video cameras/camcorders