Specifications

CCU-M5P
Camera control unit for DXC-D30P/D30WSP/
327BP/950P/9100P
•Directly interfaces with both Z-type (26-pin) and Q-type
(14-pin) camera systems •Also interfaces with DXC-950P/
9100P via CCTZ/CCZ-A or CCTQ/CCQ-AM combination
•Remote control operation with maximum cable lengths of
300m for Z-type and 100m for Q-type cable VBS, R/G/B,
Y/R-Y/B-Y, Y/C output •Built-in AC power unit •19-inch rack
mountable and 2-units high
Specifications
Power requirements: AC 187V to 275V, 50/60Hz
Power consumption: 54W
Inputs/outputs: VBS OUT (2);
BNC-type, 1.0Vp-p, sync negative, 75Ω
R/G/B OUT;
BNC-type, 700mVp-p, 75Ω
Y/R-Y/B-Y OUT;
BNC-type
Y: 1.0Vp-p, sync negative, 75Ω
R-Y/B-Y: 525mVp-p (75% colour bars)
Y/C OUT;
Y/C connector (4-pin),
[Y] 1.0Vp-p, sync negative, 75Ω
[C] 300mVp-p, 75Ω
SYNC OUT;
BNC-type, 4.0Vp-p, 75Ω, negative
GENLOCK IN;
BNC-type, VBS(1.0Vp-p) or
BB(450mVp-p), loop-through
RET VIDEO IN;
BNC-type, VBS, 1.0Vp-p, loop-through
CAMERA;
Sony Q-type, 14-pin
Sony Z-type, 26-pin
TALLY/INTERCOM;
DIN 4-pin or screw terminals
Control: Gain select
Output mode select
Status display
Shutter speed select
Iris (auto/manual)
White balance (auto/manual/preset)
Black balance (auto/manual/preset)
*1
R/B gain
Master pedestal
R/B pedestal
*2
Gamma (DXC-950P/9100P only)
Knee point (auto/manual/preset)
*1,2
Detail level
Sub-carrier phase
Horizontal phase
Tally/Intercom
*1,2
Operating temperature: 5 to 40°C (41 to 104°F)
Dimensions: Approx. 424 (W) ç 103 (H) ç 321 (D) mm
(16
3
/4 ç 4
1
/8 ç 12
3
/4 inches)
Mass: 5.9 kg (13 lb)
Supplied accessories: AC power cord
Rack mount brackets
Optional cables:
(CCU-M5P ↔ DXC-D30P/D30WSP/327BP)
CCZ-A2 (2m)
CCZ-A5 (5m)
CCZ-A10 (10m)
CCZ-A25 (25m)
CCZ-A50 (50m)
CCZ-A100 (100m)
(CCU-M5P ↔ DXC-950P/9100P)
CCTZ-3RGB (3m) & CCZ-A Cable
CCTZ-3YC (3m) & CCZ-A Cable
CCTQ-3RGB (3m) & CCQ-AM Cable
Note:
*1
When used with the DXC-950P, these items can not be controlled.
*2
When used with the DXC-9100P, these items can not be controlled.
2. Production camera accessories
–66–
VIDEO CAMERAS