Specifications

–68–
RM-81
Remote control unit
•To START/STOP the recording mode of
the UVW-100B Betacam SP one-piece
camcorder
Connector: Stereo mini
Cable length: 5 m
RCP-TX7
Remote Control Panel
•Remote Control Panel of the CCU-TX7P
•Covers the complete range of control
functions •Can be installed into a standard
19-inch rack with RMM-TXR7 Rack
Mount Kit
Power requirements:
10 to 17V
(supplied from camera or CCU)
Power consumption:
4.0W
Operating temperature:
–10°C to 45°C (14°F to 113°F)
Storage temperature:
–20°C to 55°C (–4°F to 131°F)
Mass: Approx. 1.5 kg (3 lb 5 oz)
Dimensions: 100 (W) × 330 (H) × 70 (D) mm
(4 × 13 × 2
7
/8 inches)
Cable length: 50m max. (with CCA-7 cable)
Supplied accessories:
CCA-7-5 Connecting Cable (5m)
Number plate (1set)
Screws and washers (2)
Operation manual (1)
CA-325AP
Camera adaptor for DXC-D30P/
D30WSP/327BP
•Multiple outputs of R/G/B, composite sync,
VBS, Y/C and AUDIO signals
•Built-in AC power unit
Power requirements:
AC 220/240V, 50/60Hz
Power consumption:
44W
Inputs/outputs:
INTERFACE; 50-pin
VBS OUT; BNC-type
R/G/B OUT; BNC-type (3)
COMPOSITE SYNC OUT;
BNC-type
Y/C OUT;
Y/C connector (Mini DIN 4-pin)
AUDIO OUT; Phono jack
GENLOCK IN; BNC-type
REMOTE; 10-pin
Mass: 1.3 kg (2 lb 14 oz)
CA-327P
Camera adaptor for DXC-D30P/
D30WSP/327BP
•For interfacing DXC-D30P/D30WSP/
327BP with portable VTRs, CCU-M5P and
CMA-8ACE
•Equips an S-connector and audio out
connector
•The units with serial NO. 40100 and below
can be used only with DXC-327BP
Power requirements:
DC 12V
Inputs/outputs:
INTERFACE; DIN 50-pin
VTR/CCU/CMA; Sony Q-type, 14-pin
MIC IN; XLR-type, 3-pin
DC IN; XLR-type, 4-pin
GENLOCK IN; BNC-type
EARPHONE; mini jack
INTERCOM; mini intercom jack
Mass: 1.2 kg (21 lb 10 oz)
VIDEO CAMERAS
2. Production camera accessories
(Note: This product is not available in some countries.)