Specifications

3. Sensor video cameras
–80–
VIDEO CAMERAS
DXC-LS1P
CCD Colour Video Camera
•Extremely small and compact camera composed of a
camera head and a camera control unit •1/4-inch Hyper HAD
CCD adoption •High picture quality with 460TV lines, a high
sensitivity of F5.6 at 2000 lx and an excellent signal-to-noise
ratio •Advanced colour matrix function allows you to adjust R,
G and B colours independently for accurate colour
reproduction •Easy call-up function of favorite settings (2
patterns) •Exchangeable camera head •AE control function
(CCD IRIS function combined AGC) provides automatic
control over incoming light •Automatic backlight adjustment
•Built-in electronic zoom function (x1.00 to x3.00) •Four-
pattern Light Metering System with selectable detection
method •Alternative White Balance Control modes - AWB,
ATW, 5600 K or 3200 K (Trimming with R/B paint function is
possible with AWB, 5600 K and 3200 K) •Shutter speed
control capability for long term exposure •With variable
gamma function, the contrast of the picture can be changed
for a clear view •Enhancer function provides crisper, sharper
images •Three different sizes of colour bars •Flicker
canceller is provided, freeing the electronic shutter •Positive
films can be shot as negative, or vice versa •B&W mode for
sharp images free from colour noise •Built-in RS-232C
interface •Genlock capability with VBS •Y/C or VBS output
•Optional CMA-D2CE or AC-E90HG can be used for power
supply
Supplied Accessories: Tripod adaptor (1)
Lens mount cap (1)
Operation manual (1)
Specifications
Image device: 1/4-inch Interline Transfer Hyper HAD CCD
Picture elements: 752(H) × 582(V)
Sensing area: 3.2 × 2.4 mm (1/4-inch)
Scanning system: 625 lines, 2 : 1 interlace
Sync system: Internal or external with VBS
Phase control: H (0 to +255) / SC (0/180, 0 to +255)
Horizontal resolution: 460TV lines
Lens mount: Ultra mount
Sensitivity: 2000 lx with F5.6
Minimum illumination: 10 lx (F1.2)
Gain control: AGC / 0 to -12dB (1dB steps) switchable
Electronic shutter: OFF/MANUAL/AUTO
MANUAL: 1/50, 1/100, 1/125, 1/250, 1/1000, 1/2000,
1/4000, 1/8000, 1/10000, 1/20000, 1/40000
(seconds)
2 to 512 fields, ODD/EVEN switchable
Signal-to-noise ratio: 44 dB
White balance: ATW/AWB/5600K/3200K selectable
(R/B paint: –128 to 0 to +128)
AE mode: ON/OFF switchable
AE level: –60 to 0 to +60
Light metering system: Backlight compensation/Full/Centre (Large)/Centre
(Small)/Slit (Large)/Slit (Small)
Detection method: Peak/average switchable
Master pedestal: –10 to 0 to +40
H Enhancer: –16 to 0 to +15
Zoom: ON (×1.00 to ×3.00)/OFF switchable
Colour matrix: ON/OFF switchalbe
R : –60 to 0 to +60
G : –60 to 0 to +60
B : –60 to 0 to +60
Gamma: –16 to 0 to +15
Colour mode: ON/OFF switchable
Colour bars: FULL/HI/LOW/OFF switchable
Negative/Positive reverse: ON/OFF switchable
Menu memory: 2 pages
Flicker canceller: AUTO/OFF switchable
Baud rate: 19200, 9600, 4800
Video out: VBS: 1.0 Vp-p, 75 Ω, sync negative
Y/C: Y : 1.0 Vp-p, 75 Ω, sync negative
C : 0.3 Vp-p, at burst level, 75 Ω
Operating temperature: 0˚C to 40˚C (32˚F to 104˚F)
Storage temperature: –20˚C to 60˚C (-4˚F to 140˚F)
Power requirements: DC 12 V (Supplied from CMA-D2CE)
DC 9 V (Supplied from AC-E90HG)
Power consumption: 5 W
Maximum cable length: 10 m using 10m optional cable (CCMC-16P10)
Mass: Camera head (without lens and supplied cable) :
8 g (0.3 oz)
Camera control unit : Approx. 665 g (1 lb 7 oz)
Connectors: Camera head : CAMERA (16-pin)
Camera control unit : CAMERA (20-pin), VIDEO
OUT (BNC), DC IN/VBS (12-pin, DC jack), Y/C (DIN
4-pin), GENLOCK (BNC), RS-232C (8-pin), WE OUT
(PIN)
Dimensions
ø11.4(15/32)
ø12(1/2)
25(1)
ø8.9(3/8) ø6(1/4)
ø11.8(15/32)
40.1(1 5/8)
1(1/16) 10(13/32)
12(1/2)13.8(9/16)
40(1 5/8)
20(13/16)
M10.5 x 0.5
(7/16 x 1/32)
6.7(9/32)(IN AIR)
11.8(15/32)
2(3/32)
POWER
MENU
AUTO
WHITE
CAMERA
S
DISP
CAMERA CONTROL UNIT
110(4 3/8) 160(6 3/6)
50(2)
Unit: mm (inch)