Specifications

DXC-107AP
CCD colour video camera
•High resolution 1/2-inch IT Hyper HAD sensor CCD offers
high quality picture •High sensitivity in minimum illumination
of only 4.5 lx with F1.2 lens •Signal-to-noise ratio of 46 dB
•High horizontal resolution of 460TV lines •S-video output is
available through the CMA-D2CE Camera Adaptor •Four
alternative white balance control: Automatic control modes—
AWB (Auto White Balance)/ATW (Auto Tracing White),
Preset modes—INDOOR (3200 K)/OUTDOOR (5600 K)
•3-position selectable CCD-IRIS covers various light
conditions—BACKLIGHT/STANDARD/SPOTLIGHT
•Variable speed electronic shutter •Built-in four digit ID
number generator •C-mount adoption •External genlock
capability of VS •Together with the YS-W150P/YS-W250P
Camera Adaptor, video and sync signals, and DC power can
be transmitted up to 300 metres away through a single
5C-2V coaxial cable •Remarkably compact and lightweight
Supplied accessories: Lens connector
Lens mount cap
Operating instruction manual
Optional accessories: Camera adaptor YS-W150P
Camera adaptor CMA-D2CE
Camera adaptor YS-W250P
DC cable CCDC-5/10/25/50A/100A
12-pin multi-core cable CCMC-12P02/05/10/25
Microscope adaptor MVA-12
Coupler for NIKON microscopes except the
SMZ-10 series MVAC-33-N
Coupler for NIKON SMZ-10 series microscopes
MVAC-33-SM
Coupler for OLYMPUS microscopes
MVAC-33-O
Coupler for ZEISS microscopes except AXIOVERT
100/135 series and SV series ZBB
Coupler for ZEISS AXIOVERT 100/135 series and
SV series microscopes ZSV
Specifications
Image device: 1/2-inch InterlineTransfer Hyper HAD CCD
Picture elements: 752 ç 582 (V)
Sensing area: 6.4 mm ç 4.8 mm
Video signal system: PAL standard
Sync system: Internal or external with VS
Horizontal resolution: 460TV lines
Lens mount: C mount
Sensitivity: F5.6 at 2,000 lx (AGC off)
Minimum illumination: 4.5 lx with F1.2 (AGC on)
Gain control: AGC ON/OFF switchable
Electronic shutter: OFF, 1/120, 1/250, 1/1000, 1/2000, 1/4000,
1/10000 (seconds)
S/N ratio: 46 dB
CCD IRIS control: BACKLIGHT/STANDARD/SPOTLIGHT switchable
Phase control: H phase control
Video out: VBS: 1.0 Vp-p, 75 Ω, sync negative
Y/C: Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω, without sync
Operating temperature: 0 to 40°C (32 to 104°F)
Power requirements: DC 12 V from CMA-D2CE/D7CE
DC 28 V from CMA-D7CE/YS-W250P
Power consumption: 3.3 W using CCMC-12P multi-core cable or CCDC
DC cable (DC 12 V)
6.3 W using coaxial cable (DC 28 V)
Maximum cable length: 300 m using 5C-2V coaxial cable and
CMA-D7CE/YS-W250P
100 m using
CCDC-100A DC cable and CMA-D2CE
25 m using CCMC-12P25 multi-core cable and
CMA-D2CE/D7CE
White balance: AUTO: ATW or AWB
PRESET: 3200 K or 5600 K
Mass: Approx. 360 g (12.7 oz) without lens
Connectors: DC IN/VIDEO OUT (BNC)
DC IN (12-pin)
LENS (4-pin)
Lens is optional
55 (2
1
⁄4)
50 (2)
25
(1)
1
⁄4-inch-20 UNC
52 (2
1
⁄8)
1
⁄4-inch-20 UNC
31
(1
1
⁄4)
5 (
7
⁄32)
Unit: mm (inch)
27.5 (1
1
⁄8)
130 (5
1
⁄8)
Dimensions
3. Sensor video cameras
–84–
VIDEO CAMERAS