Specifications

–95–
2. Editing Control Units
RM-450A
Editing control unit
•Can be connected to 9-pin equipped editing VTR on both
the player side and recorder side •The RM-450A not only
allows CTL based editing but also makes Time Code editing
possible •Provides the Relative Time Code (RTC) editing
mode, in which time code is used as an edit reference and
time code progress is like CTL on the LED counter •The
AUDIO COUNTER RESET function automatically sets the
editing point first designated to “0:00:00:00” •Can use the
Assemble and Insert (V/A1/A2) edit modes, and provides
editing functions such as editing IN-POINT/OUT-POINT
ENTRY, PREVIEW, TRIM, AUTO EDIT/END, REVIEW/
JUMP, GO TO, AUDIO SPLIT, and LAST EDIT •The
function keys are laid out to enable easy operation •Provides
the JOG/SHUTTLE dials on both the player side and
recorder side •Accepts REF. VIDEO IN (reference video
input) for synchronized operation •Can memorize the pinch
on delay and adjust the editing in-point automatically •Mode
setting is very easy and convenient when using the preset
switches on the front panel •A cue pulse out is provided for
external equipment •Indicates the “Error” and error number
on the LED counter along with a warning sound •A built-in
self-diagnostic function improves serviceability and make
maintenance easy
Supplied accessories: AC power cord
Error message chart
Operation manual
Optional accessories: 9-pin remote control cable RCC-5G/10G/30G
Rack mount kit RMM-450
(for 19-inch EIA and SONY SU-512 rack)
Specifications
Power requirements: AC 198 to 264V, 48 to 63Hz
Power consumption: 11W
Mass: Approx. 3.1 kg (61 lb 13 oz)
Dimensions: 390 (W) × 93 (H) × 265 (D) mm
(15 × 3
3
⁄4 × 10
1
⁄2 inches)
Operating temperature: 0 to 40°C (32 to 104°F)
Edit reference: CTL, SMPTE/EBU LTC, VITC
Reference video input: 0.5Vp-p to 2.0Vp-p negative, 75Ω, unbalanced
External sync input: 0.5Vp-p to 5.0Vp-p negative, 75Ω, unbalanced
Cue pulse signal: Active low: low level 0 to 0.5V/high 3.5 to 5.0V
NON-LINEAR/ EDITOR/DME/
SWITCHER