Specifications

–97–
2. Editing Control Units
FXE-120P
•Integration of an editing controller, video switcher, audio
mixer and digital effects generator •Three VTR control
(RS-422A/RS-232C) •LANC (Local Application Control bus
system) interface for controlling home-use LANC VTRs and
camcorders as player VTRs •Time code based editing
•Equipped with two buses •GPI input/output •8-bit
quantizing, 4:1:1 digital processing •Built-in Frame
Synchronizers allow editing without a Time Base Corrector
•140 wipe patterns •Digital effects (Mix Effect/Fade Effect/
Input Effects) •Built-in chromakeyer and luminance keyer
•Colour correction capability •25 different colour background
•Editing memory for 99 events •Saving/ loading of EDL Data
is possible
Supplied Accessories AC power cord (1)
Instruction manual (1)
Userís guide (1)
LANC cord (2)
Optional Accessories RCC-5/10/30G RS-422A remote cable
SMF-3036C (RS-232C remote cable, 9-pin to 25-pin)
Specifications
General
Signal system: PAL
Power requirements: AC 220 to 240 V ± 10%, 50/60Hz ± 5%
Power consumption: Maximum 65 W
Operating temperature: 5 to 40°C (41 to 104°F)
Storage temperature: -20 to 60°C (-4 to 140°F)
Dimensions: 424 (W) × 138.5 (H) × 437.5 (D) mm
(16
3
⁄4 × 5
1
⁄2 × 17
1
⁄4 inches)
Mass: Approx. 7.3 kg (16 lb 1 oz)
Systems
Time counter: Internal time counter (3)
Time count display range:
Time code: 00:00:00:00 to 23:59:59:24
CTL: ± 9:59:59:24 Full edit mode
Editing mode: Assemble edit: Video, Audio 1/2
Insert Edit: Video Audio 1/2
First edit, Time code insert
Split edit, Dynamic Motion Control (DMC)
Edit type: MIX, WIPE, SYNC-ROLL, CUT, MANUAL 1st Edit,
Audio Split Edit, DMC Control
Edit reference: CTL, LTC, SMPTE/EBU time code, 8mm time code,
RC time code, DV time code
Edit Accuracy: RS-422A: ±0 frame with TC, ±1 frame with CTL
RS-232C: ±1 frame with TC
LANC: ±5 frame with RC time code
Transition time range: 0 to 999 (unit: frames)
Pinch-on Delay: Simultaneous measurement of pinch-on delay for up
to three VCRs connected to RS-422A/RS-232C/
LANC connectors
EDL memory capacity: 99 edits
Split edit reference: Audio or Video input
Control
VTR Interface: RS-422A: D-sub 9-pin
RS-232C: D-sub 9-pin
LANC: stereo mini-mini jack
Controllable VTR: 1 recorder, up to 2 players
GPI interface: GPI IN (BNC)
GPI OUT (BNC) (2)
EDL Interface: EDL IN/OUT (D-sub 9-pin)
Video
Video inputs
Composite: BNC (4), unbalanced
(PLAYER 1, PLAYER 2, AUX1, RECORDER)
Video: 1.0 Vp-p, 75 Ω
Sync: 0.3 Vp-p
Burst: 0.3 Vp-p
S-Video 4-pin (4), unbalanced
(PLAYER 1, PLAYER 2, AUX1, RECORDER)
Y: 1.0 Vp-p, 75 Ω, sync negative
C: 0.3 Vp-p, 75 Ω
Burst sync: 0.3 Vp-p
NON-LINEAR/ EDITOR/DME/
SWITCHER
Video Outputs
Composite: BNC (3), unbalanced
(PGM 1, 2, MONITOR)
Video: 1.0 Vp-p, 75 ohms
Sync: 0.3 Vp-p
Burst: 0.3 Vp-p
S-Video 4-pin (2), unbalanced
Sync: 0.3 Vp-p
Burst: 0.3 Vp-p
Black bust out: BNC (4), unbalanced
Sync: 0.3 Vp-p,
Burst: 0.3 Vp-p
Audio
Audio Inputs (stereo): AUDIO L/R INPUT (RCA PIN jack), (2 channels (5))
PLAYER 1 MAIN (2), SUB (2)
PLAYER 2 MAIN (2), SUB (2)
RECORDER (2)
AUX 1 (2)
AUX 2 (2)
Input impedance: selectable with 600 Ω terminal
switch
Input level: -7.5 dBs (input impedance 47 kΩ or
above, 600 kΩ switch OFF)
+4dBs (input impedance 600Ω, 600 Ω
switch ON)
Mic Input (monaural): Monaural phono (1), unbalanced
Input level: -60 dBs,
Input impedance: more than 4.3 kΩ or above
Audio Outputs (stereo) AUDIO L/R OUTPUT (PIN jack) (6)
PGM 1(2), PGM 2(2), MONITOR (2)
Output level: -7.5 dB/+4.0 dB selectable
(PGM1, PGM2)
Signal Processing
Sampling rate: Y: 910 fH ( fH = 15,625 kHz)
R-Y/ B-Y: 1/4 x 910 fH
Quantization: Y/R-Y/B-Y: 8-bit
Frequency response: 0 to 5 MHz +1 dB/ -4 dB
Signal to noise ratio: More than 53 dB
Y/C delay: Less than 50 ns (Composite)
Recommended LANC VTR for recorder: DSR-30P