Specifications

Part Names of the Main Unit

Controls

NOTE

• TV/VIDEO, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.

Fundamentally, this operation manual provides a description based on operation using the remote control.

SLEEP TIMER indicator

The SLEEP TIMER indicator lights up red when the

SLEEP TIMER is set. (See page 19.)

POWER indicator

The POWER indicator lights up green when the power is on,

and red when in the standby mode (the indicator will not light up

when the main power is off).

Remote sensor

Speaker

Upper control panel

VOL (volume) (–)/(+)

TV/VIDEO

POWER

CH (channel) ( )/( )

Table stand

Easel type

The angle of the LCD TV set has to be kept at 12°.

Caution:

• Be careful not to hurt your fingers with the stand.

• Do not pick up the LCD TV set by its stand.

• Securely unfold the easel type table stand until you

hear a clicking sound.

Only use the easel type table stand after first unfolding

until a clicking sound is heard to ensure that it is stable.

Easel type table stand

How to Prevent the LCD TV Set from Falling Over

To prevent the LCD TV set from falling over in case

of earthquakes and so on, strap it onto the wall by

threading one end of the string through the loop of

the table stand (1) and fastening the LCD TV set

with the string attached to the hook on the wall or

the post, etc. (2).

(An example of strapping the LCD TV set onto the

wall is shown on the right.)

• The string and hook are commercially available.

Table

stand

LC-20SH3H_E_P01-07.p65 05.9.13, 3:20 PM5