Service manual

8
LC-20VM2
LC-121M2E
LC-150M2E
Lamp Unit (Upper)
(KLMP-0091CEZZ)
Lamp Reflector (Upper)
(PSHEP0184CEZZ)
LCD Display Unit
Lamp Unit (Lower)
(KLMP-0092CEZZ)
Lamp Reflector (Lower)
(PSHEP0185CEZZ)
Spacer (Lower)
Diffusion Sheet
Light Guide Sheet
Spacer (Upper)
Reflection Polarizing Sheet
Reflection Sheet A
(PSHEP0186CEZZ)
7
7
8
9
12
14
11
9
11
10
12
13
Reflection Sheet B
(PSHEP0187CEZZ)
Shield Plate
ITO Sheet
LCD Display Unit
(Front)
7
7
7. Remove the four LCD unit front fixing screws and four
rear fixing screws to remove the shield plate.
8. Remove the two reflection sheets.
9. Remove the upper and lower fluorescent tubes.
10. Remove the light guide plate.
11. Remove the upper and lower reflection sheets.
12. Remove the upper and lower spacers.
13. Remove the ITO sheet.
14. Remove the diffusion sheet and the reflection polarizing
plate.
• Caution for handling the LCD panel
1. Work in a clean room. (Humidity: 50% or more)
2. A worker must wear arm bands.
3. Work on a conductive mat.
4. Do not expose the unit to shock such as fall or vibration.
5. Use an ionizer. (within 30 cm)