Operation Manual

Automatically switch the TV on or off (On /Off time)
On / Off time switches the TV to power on or standby
at a specified time.
NOTE
Before using off time function, you have to set the time •
on your TV correctly.
Press 1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select Time and press OK or
to enter.
Press
4. to select Timer and press / to
select:
Both On / Power On Timer / Power Off •
Timer: Press
to highlight the Power On
Timer or Power Off Timer box and set power
on or off time by using the digit buttons on
your remote control.
Off: • Disable Timer.
Follow the on-screen instructions to exit.5.
Automatically switch the TV to standby (Sleep timer)
Sleep timer switches the TV to standby after a defined
period of time.
Press
1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select Sleep Timer.
Press
4. / to select the period of time before
TV enters to standby.
Follow the on-screen instructions to exit.
5.
No Operation Power Off
When the Set and Remote key operation are not
operated with specified period by this setting (1/2/4
Hours), the power status is changed to stand by mode
automatically.
Press
1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select No Operation Power Off.
Press
4. / to select the period of time before
TV enters to standby.
Follow the on-screen instructions to exit.
5.
TV menu
Power Management
Press 1. TV MENU on the remote control and
Select
≥ Power Management.
Press
2. / to select:
On: If a period of time is elapsed with no video
signal in PC mode, the power status is changed
to stand by mode automatically. When there is
available video signal again, the power status is
returned to power on mode automatically.
Off: Disable Power Management.
Change the time zone
Press 1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Select
3. Time Zone and press / to select
your time zone.
Follow the on-screen instructions to exit.
4.
Set the clock
Press 1. TV MENU on your remote control and
select
≥ Time Setup.
Press
2. OK or to enter Time Setup.
Press
3. / to select Time and press OK or
to enter.
Auto Synch
ronization
Date
Time
On
2009/10/21
01:01:39
Timer
Power On Timer
Power Off Timer
Of
f
00:00:00
00:00:00
Select 4. Auto Synchronization and press /
to select:
On:• Sets the clock automatically the same with
the digital signal time. (Only if digital signal is
available).
Off:• Press
/ to set your system Date
or system Time manually by using the digit
buttons on your remote control. And select
GMT +0:00 on Time Zone setting above.
When the clock setting is completed, follow the 5.
on-screen instructions to exit.
18
54B0101C_English.indd 1854B0101C_English.indd 18 5/22/2010 09:57:085/22/2010 09:57:08