SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO Printed in Mexico Imprimé au Mexique Impreso en México Impresso no México TINS-A864WJZZ 03P08-MMG (J) ESPAÑOL PORTUGUÊS LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO TELEVISOR DE CRISTAL LÍQUIDO FRANÇAIS ENGLISH LC-22SV6U LC-22SV6U
ENGLISH LC-22SV6U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: U.S.A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. ■ Stand—Do not place the product on an unstable cart, stand, tripod or table.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Outdoor Antenna Grounding – If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS Page IMPORTANT INFORMATION ....................................................................................................... 1, 2 DEAR SHARP CUSTOMER ............................................................................................................. 3 IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5 CONTENTS .........................................................................................................
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Remote Control “AAA” size (UM/SUM-4) Dry Battery (×2) RRMCGA169WJSA Antenna Cable AC Cord QCNWG0003CEPA QACCDA019WJPZ Operation Manual Cable Clamp (×2) PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH AC Adapter (See page 9) UADP-A048WJPZ TINS-A864WJZZ LHLDW0109CESA A • AC cord enclosed in this product is an object for 110-125V. In using it on the 125-240V AC, please consult to the following.
PREPARATION Using the Remote Control ■ Use the remote control by pointing it towards the remote control sensor window on the main unit. Objects between the remote control and sensor window may prevent proper operation. POWER SLEEP OPC HEADPHONE HEADPHONE jack OPC indicator SLEEP indicator POWER indicator OPC sensor Remote control sensor Cautions regarding use of the remote control ■ Do not expose the remote control to shock.
PREPARATION (Continued) Removing the Terminal Covers ■ Before connecting cables and cords into the rear terminals, remove the terminal covers. Push in the tabs and pull out the covers carefully. ■ To mount the terminal cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the cover until the tab locks in place with a click.
PREPARATION (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1.
PREPARATION (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
DISPLAY AND CONTROL OVERVIEW Controls Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER VOL CH MENU TV/VIDEO MAIN POWER To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 25 degrees to right and left. Adjust the angle so that the TV set can be watched most comfortably.
DISPLAY AND CONTROL OVERVIEW (Continued) ● Adjusting the screen view angle Terminals COMPONENT Y PB PR AUDIO (L) AUDIO (R) ANT. (Antenna terminal) POWER INPUT (DC 13V) Hold the carrying handle and tilt the screen while steadying the stand with your other hand. You can adjust the screen vertically up to 5 degrees forward or 10 degrees backward, or rotate 25 degrees to right and left.
REMOTE CONTROL 1 DISPLAY Display the channel and time information. Display the receiving channel for 10 seconds. 1 2 BRIGHT (p. 28) 2 Virtual BRIGHT R POWE 12 AV MO DE 3 4 5 FREEZE DISPLAY PIC.FL SLEEP IP ENTER MENU RETURN MENU 6 MUTE 7 8 9 10 VIEW MOD E AUDIO ONLY VOL 3 POWER (p. 21) 13 14 15 16 17 CC TV/VIDEO FLASHBACK CH Adjust the brightness of the screen. 18 19 20 Switch the Liquid Crystal Television power on or off. 4 FREEZE (p. 55) Freeze the screen image. 5 SLEEP (p.
EZ SETUP (WITH AUTO CLOCK SETTING) EZ SETUP during the First Power On ■ When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press MAIN POWER. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the TV set. (See page 10.) (3) Connect the AC adapter to the POWER INPUT terminal of the product and plug in the AC cord to the wall outlet. (See page 11.
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued) EZ SETUP during the First Power On (Continued) Virtual BRIGHT POWER 6 AV MOD E FREEZE DISPLAY VIEW MODE If you want to stop the EZ SETUP process once it has started, press c and it will be canceled. If you want to SET UP again, please refer to pages 40 to 42 on SET UP. PIC.
SETTING THE CLOCK AUTO CLOCK Setting There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK set the clock manually in areas where no channel carries EDS signals. Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP, and press ENTER. VIEW MODE PIC.
SETTING THE CLOCK (Continued) AUTO CLOCK Setting (Continued) Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E VIEW MODE PIC.FL IP SLEEP 5 Press a/b to move the cursor to EDS CH SET, and press ENTER. 6 Press c/d to select AUTO or MANUAL, and press ENTER. 7 Press a/b to move the cursor to START, and press ENTER.
SETTING THE CLOCK (Continued) MANUAL CLOCK Setting If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP, and press ENTER. 3 Press a/b to move the cursor to CLOCK, and press ENTER. 4 Press a/b to move the cursor to MANUAL CLOCK, and press ENTER. VIEW MODE PIC.
BASIC OPERATION TV signals in your region This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below. TV broadcasting system Country Factory setting of color system User setting TV Video TV/Video U.S.A.
BASIC OPERATION (Continued) Standby To turn off the LCD TV Virtual BRIGHT POWER AV MOD E FREEZE DISPLAY Press POWER on the remote control. The POWER indicator turns red. VIEW MODE PIC.FL SLEEP IP ENTER MENU RETURN To turn the LCD TV back on MENU MUTE AUDIO ONLY CC TV/VIDEO Press POWER again. The POWER indicator turns green. POWER FLASHBACK VOL CH FAVORITE CH A B C Switching TV/VIDEO [AV1/AV2/AV3/COMPONENT/TV] Modes Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E VIEW MODE PIC.
BASIC OPERATION (Continued) Sound Volume 1 Press VOL (+) to increase the sound volume. The bar indicator shifts right. POWER VOLUME 50 Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 2 VIEW MODE PIC.FL SLEEP IP Press VOL (–) to decrease the sound volume. The bar indicator shifts left. VOLUME 10 ENTER MENU RETURN MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH To mute the sound MUTE 1 Press MUTE to temporarily turn off the sound. is displayed for The MUTE mark 4 seconds.
BASIC OPERATION (Continued) Changing Channels Changing channels by using Channel Select on the remote control • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2or 3-digit number. Virtual BRIGHT POWER FREEZE DISPLAY To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. AV MOD E VIEW MODE 1 2 PIC.
SELECTING MENU ITEMS Selecting Menu Items • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E SLEEP ENTER MENU RETURN Press MENU to display the MENU screen. 2 Press a/b to select the desired menu item, and press ENTER. 3 Press MENU to exit. VIEW MODE PIC.
ADJUSTMENTS Adjusting VIEW MODE Settings You can directly change the size of the picture by pressing VIEW MODE on the remote control. 1 VIEW MODE Press VIEW MODE to display the VIEW MODE screen. V I EW MODE [ SMART STRETCH] Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 2 VIEW MODE PIC.FL IP SLEEP ENTER MENU RETURN Press VIEW MODE to change the setting. Change the setting as shown below.
ADJUSTMENTS (Continued) Moving the Picture on the Screen You can move the picture upwards or downwards on the screen. Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E VIEW MODE PIC.FL IP SLEEP ENTER MENU RETURN MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH FAVORITE CH A 26 Press a/b to move an image on the screen to the desired position. Press ENTER to return to the initial image position. B C ENTER/ a/b A • This setting cannot be stored.
ADJUSTMENTS (Continued) Adjusting SLEEP TIMER Settings You can set the SLEEP TIMER to automatically turn off the TV. Directly setting the SLEEP TIMER Virtual BRIGHT POWER FREEZE DISPLAY 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). AV MOD E VIEW MODE PIC.FL IP SLEEP ENTER MENU RETURN MENU MUTE AUDIO ONLY SLEEP CC TV/VIDEO --- FLASHBACK VOL 30 60 CH 120 B 90 (minutes) The SLEEP TIMER is turned off when --- is displayed.
ADJUSTMENTS (Continued) Adjusting BRIGHTNESS Settings You can set the brightness of the screen. Directly setting the BRIGHTNESS Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E VIEW MODE PIC.FL IP SLEEP 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. ENTER MENU RETURN MENU MUTE AUDIO ONLY FLASHBACK VOL BRIGHT AUTO CC TV/VIDEO BRIGHT CH B BR I GHTNESS [ BR I GHT ] A • The BRIGHTNESS screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) Adjusting PICTURE FLIP Settings You can set the orientation of the picture. Directly setting the PICTURE FLIP Virtual BRIGHT POWER 1 Press PIC. FLIP to display the PICTURE FLIP screen. 2 Press PIC. FLIP to change the setting. AV MOD E FREEZE DISPLAY VIEW MODE PIC.FL SLEEP IP PIC.
ADJUSTMENTS (Continued) Adjusting AUDIO ONLY Settings When listening to music from a music program, you can set the Liquid Crystal display off and enjoy audio only. Directly setting the AUDIO ONLY Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 1 Press AUDIO ONLY. “PRESS “AUDIO ONLY” FOR VIDEO OFF” displays. 2 Press AUDIO ONLY again and the screen image will disappear. 3 Press AUDIO ONLY again and the screen image will reappear. VIEW MODE PIC.
ADJUSTMENTS (Continued) Adjusting COOL CLIMATE Settings Improves the response of Liquid Crystal Panel when viewing fast-moving image. The effect is greater at low room temperatures (at or below 15˚C/59˚F). Virtual BRIGHT POWER FREEZE DISPLAY 1 AV MOD E Press MENU to display the MENU screen. VIEW MODE PIC.
ADJUSTMENTS (Continued) Adjusting LANGUAGE Settings The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Virtual BRIGHT POWER FREEZE DISPLAY AV MOD Press MENU to display the MENU screen. E VIEW MODE MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC.FL IP SLEEP ENTER MENU RETURN MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH ENTER/ a/b SELECT : 2 Press a/b to move the cursor to SET UP, and press ENTER.
ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings Video adjustments have different selection items depending on TV mode or AV mode (signal from an external device). (See page 34.) 1 Virtual BRIGHT POWER FREEZE DISPLAY Press MENU to display the MENU screen. AV MOD E VIEW MODE MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC.
ADJUSTMENTS (Continued) Adjusting VIDEO ADJUST Settings (Continued) TV/AV/COMPONENT mode Selected item Press c Press d PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL Less brightness More brightness SHARPNESS Soft picture Sharp picture COLOR TEMP. STANDARD LOW HIGH MID Adjusts the color temperature to give a better white balance.
ADJUSTMENTS (Continued) Adjusting AUDIO ADJUST Settings You can adjust the sound quality to your preference with the following settings. 1 Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E Press MENU to display the MENU screen. VIEW MODE PIC.FL IP SLEEP ENTER MENU RETURN MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH ENTER/ a/b/c/d MENU 2 Press a/b to move the cursor to AV ADJUST, and press ENTER.
ADJUSTMENTS (Continued) Adjusting AUDIO ADJUST Settings (Continued) Selected item Press c Press d TREBLE For weaker treble For stronger treble BASS For weaker bass For stronger bass BALANCE Decrease audio from the right speaker L R Decrease audio from the left speaker DOLBY VIRTUAL Selected item RESET Press a YES Press b NO YES: Each adjustment value returns to the factory preset value and the previous on-screen display will show.
ADJUSTMENTS (Continued) Adjusting VIRTUAL DOLBY SURROUND Settings You can enjoy the SURROUND 2ch stereo with Dolby Pro Logic II technology. VIRTUAL DOLBY SURROUND is a technology certified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using Dolby Pro Logic or Dolby Pro Logic II. VIRTUAL DOLBY SURROUND retains all the original multichannel audio information and provides the listener with the sensation of being surrounded by additional speakers.
ADJUSTMENTS (Continued) Adjusting PRESET Settings 1 Virtual BRIGHT POWER Press MENU to display the MENU screen. AV MOD E FREEZE DISPLAY VIEW MODE PIC.FL IP SLEEP MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP ENTER MENU RETURN MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH ENTER/ a/b/c/d SELECT : 2 Press a/b to move the cursor to PRESET, and press ENTER. MENU FAVORITE CH A B C Press a/b to move the cursor to the desired item, and press ENTER.
ADJUSTMENTS (Continued) Adjusting PRESET Settings (Continued) Selected item Factory setting BRIGHTNESS [BRIGHT] MTS* [STEREO] AUTO POWER OFF [OFF] Maximum brightness Stereo audio This feature is inactive. Setting options [BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in a well-lit area. Saves energy. [DARK] Brightness 10% → Sufficiently bright when viewing in dim areas. [AUTO] Screen brightness adjusts according to the ambient light of the room.
ADJUSTMENTS (Continued) SET UP ■ EZ SETUP When you move to an area with different broadcasting signals the set will automatically memorize the channel number and time by executing EZ SETUP again. Follow steps 1-3 below, select EZ SETUP, and then go to step 3 on page 15. ■ CHANNEL SETTING It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 1 Press MENU to display the MENU screen.
ADJUSTMENTS (Continued) SET UP (Continued) ■ Saving broadcast TV channels in the memory Virtual BRIGHT POWER FREEZE DISPLAY 1 Press MENU to display the MENU screen, press a/b to move the cursor to SET UP, and press ENTER. 2 Press a/b to move the cursor to CH-SETTING, and press ENTER. 3 Press a/b to move the cursor to CH SEARCH, and press ENTER. AV MOD E VIEW MODE PIC.
ADJUSTMENTS (Continued) SET UP (Continued) ■ Adjusting COLOR SYSTEM 1 Virtual BRIGHT POWER AV MOD E FREEZE DISPLAY Press MENU to display the MENU screen, press a/b to move the cursor to SET UP, and press ENTER. VIEW MODE MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP PIC.FL IP SLEEP ENTER MENU RETURN MENU MUTE AUDIO ONLY FLASHBACK VOL SELECT : CC TV/VIDEO CH ENTER/ a/b/c/d 2 MENU Press a/b to move the cursor to COLOR SYSTEM, and press ENTER.
ADJUSTMENTS (Continued) Adjusting FAVORITE CHANNEL Settings This function allows you to program 4 favorite channels in each of 3 different categories (a total of 12 channels). By setting the favorite channels in advance, you can select your favorite channels easily. 1 Virtual BRIGHT POWER FREEZE DISPLAY Press MENU to display the MENU screen. AV MOD E VIEW MODE PIC.
ADJUSTMENTS (Continued) Adjusting BLUE SCREEN Settings ■ BLUE SCREEN Automatically turns the screen blue if no broadcast signal is received. Virtual BRIGHT POWER 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to SET UP, and press ENTER. AV MOD E FREEZE DISPLAY VIEW MODE PIC.
ADJUSTMENTS (Continued) Connecting External Speakers ■ Connecting external speakers Rear view How to connect the speaker cable 1 Pull up the lid. 2 Insert the edge of the cable. 3 Put the lid back down. • Bundle the cables of the external speakers with clamps as shown above. When using external speakers • Change the speaker setting to external speakers. (See page 44.) Make sure to connect the speaker jack and cable polarity (L, +) properly • The speaker jacks have plus (L) and minus (+) polarity.
ADJUSTMENTS (Continued) Adjusting CLOSED CAPTION Settings ■ SETTING CLOSED CAPTION • This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). • Not all programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown.
ADJUSTMENTS (Continued) Adjusting CLOSED CAPTION Settings (Continued) ■ SETTING CLOSED CAPTION Setting the CLOSED CAPTION on the MENU screen Virtual BRIGHT POWER FREEZE DISPLAY 1 Press MENU to display the MENU screen. 2 Press a/b to move the cursor to CLOSED CAPTION, and press ENTER. AV MOD E VIEW MODE PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings ■ V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. • Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [2] TV PARENTAL GUIDELINES ⇐ ⇒ V (Violence) S (Sexual Situation) L (Adult Language) D (Sexually Suggestive Dialog) xxx ✕ ✕ ✕ ✕ TV-14 (Parents Strongly Cautioned) X ✕ ✕ ✕ ✕ TV-MA (Mature Audience Only) X ✕ ✕ ✕ RATING FV (Fantasy Violence) content based TV-Y (All children) ⇑ TV-Y7 (Directed to Older Children) TV-G (General Audience) age based TV-PG (Parental Guidance Suggested) ⇓ ✕ X : The content rating can be set,
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) ■ SETTING V-CHIP [1] MPAA RATING Virtual BRIGHT POWER 1 Press MENU to display the MENU screen. MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP 2 Press a/b to move the cursor to V-CHIP BLOCK, and press ENTER. MENU SLEEP T IMER AV ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using Channel Select, and press ENTER.
ADJUSTMENTS (Continued) Parent Control Continued) Adjusting V-CHIP(V-CHIP SettingsOperation (Continued) [2] TV GUIDELINES ● Setting TV GUIDELINES Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 50.) 2 Press a/b to move the cursor to TV GUIDELINES, and press ENTER. VIEW MODE PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) ■ Setting BLOCK CONTENT Virtual BRIGHT POWER 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 50.) 2 Press a/b to move the cursor to TV GUIDELINES, and press ENTER. AV MOD E FREEZE DISPLAY STATUS [ OFF ] VIEW MODE PIC.FL IP SLEEP ENTER MENU RETURN MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH ENTER/ a/b/c/d SELECT : 3 MENU Press a/b to move the cursor to BLOCK CONTENT, and press ENTER.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [3] ACTIVATING V-CHIP BLOCK ● Setting STATUS You can activate V-CHIP BLOCK after setting [1] MPAA RATING and/ or [2] TV GUIDELINES. Virtual BRIGHT POWER FREEZE DISPLAY AV MOD E 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 50.) 2 Press a/b to move the cursor to STATUS, and press ENTER. VIEW MODE V–CH I P BLOCK RETURN MPAA TV GU I DEL I NES PIC.
ADJUSTMENTS (Continued) Adjusting V-CHIP Settings (Continued) [5] CHANGING V-CHIP BLOCK SETTINGS 1 Virtual BRIGHT POWER AV MOD E FREEZE DISPLAY VIEW MODE PIC.FL SLEEP Repeat steps 1 to 2 of [1] MPAA RATING, then INPUT SECRET NO. will be displayed. I NPUT SECRET NO . IP – – – – ENTER MENU RETURN MENU MUTE AUDIO ONLY CC TV/VIDEO FLASHBACK VOL CH Channel Select 2 FAVORITE CH A B C Input the 4-digit secret number by using Channel Select; the VCHIP select mode will be displayed.
ADJUSTMENTS (Continued) Adjusting AV MODE Settings ■ Adjusting AV MODE Settings AV MODE gives you preset options to choose from to best match the image and sound based on roombrightness and playback software used. Selected item Description DYNAMIC (FIXED) Changing image and sound settings to factory preset values. No adjustments are allowed. DYNAMIC For a clear-cut image emphasizing high contrast for sports viewing. STANDARD Changing image and sound settings to standard values.
CONNECTING EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage. Example of external devices that can be connected To AV-IN1 terminal • Video camera • Home video game system * If your external device has an S-video terminal, S-VIDEO connection is recommended.
CONNECTING EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a video camera (AV-IN1/2/3/COMPONENT) To COMPONENT input (Video) terminal Y PB PR To COMPONENT output (Video) terminal To COMPONENT input (Audio) terminal Audio (L) Audio (R) To COMPONENT output (Audio) terminal To S-VIDEO input terminal DVD Player S-video To S-video output terminal To AV-IN1 terminal Video Audio (L) Audio (R) Video camera VCR To audio/video output terminal To AV-IN2/3 terminal Video Audio (L) Audio (R) To audio/vi
CONNECTING EXTERNAL DEVICES (Continued) Outputting video and audio (video output) You can output video and audio signals from the TV set through the AV output terminals (AV-OUT). • When using AV3 as an output terminal, select PRESET in the MENU and set AV3 IN/OUT to OUT. (See pages 38 and 39.) • The factory setting for AV3 IN/OUT is IN. Connect to a VCR, audio amplifier, etc. A • AV3 has 2 OUT modes (see pages 38 and 39).
TROUBLESHOOTING ■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms. TV set Problem Sound Picture Picture Check item There is no picture or sound. • Make sure the AC adapter is properly inserted in the power outlet. • Reception other than those of broadcasting stations can be considered. • Make sure the input mode is set to TV. • Make sure the MAIN POWER switch of the main unit is on. There is no picture.
TROUBLESHOOTING (Continued) Antenna Problem The picture is not sharp. Check item • • • • The reception may be weak. The quality of the broadcast may also be bad. Make sure the antenna is facing the right direction. Make sure the outside antenna is connected. The picture moves. The picture is doubled or tripled. The picture is spotted. There are stripes on the screen or colors fade. • Make sure the antenna is facing the right direction.
SPECIFICATIONS Items LCD panel Number of dots Video color systems TV Standard (CCIR) TV Tuning System TV function STEREO CATV 3 Dimensional Y/C separation circuit Digital comb filter Brightness Lamp life Viewing angles Audio amplifier Speakers AV-IN1 AV-IN2 AV-IN3 Terminals COMPONENT Antenna Headphone EXTERNAL SPEAKER OSD language Power supply Power consumption Weight Accessories Model LC-22SV6U 22” Advanced Super View & BLACK TFT LCD 1,229,760 dots WVGA N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 NTSC/P
DIMENSIONAL DRAWINGS Unit: inch/(mm) 1617/32 (420) 1415/32 (367.5) 105/8 (270.2) 421/64 (110) 315/16 (100) 315/16 (100) 147/64 (44) 231/32 (75.7) 73/16 (182.4) 9 27/32 (250) 62 183/16 (462) 1925/64 (492.6) 205/64 (510) 77/64 (180.
CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
VALID IN CANADA ONLY LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORATION OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO Printed in Mexico Imprimé au Mexique Impreso en México Impresso no México TINS-A864WJZZ 03P08-MMG (J) ESPAÑOL PORTUGUÊS LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO TELEVISOR DE CRISTAL LÍQUIDO FRANÇAIS ENGLISH LC-22SV6U LC-22SV6U