MODEL LC-24LE430X LC-32LE430X LCD COLOUR TELEVISION OPERATION MANUAL Only for LC-24LE430X LC24LE430X_EN.
LC24LE430X_EN.
Supplied accessories Remote control unit “AAA” size battery (g2) Operation manual Stand unit Stand base Stand neck Screws (x 8) Contents Page Supplied accessories ..............................................1 Dear SHARP customer............................................1 Important Safety Precautions ................................2 Important information .............................................2 Trademarks ..............................................................2 Attaching the stand ..
Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product. • Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet basement. • Do not place vases or any other water-filled containers on this product.
Attaching the stand • Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 Confirm the screws supplied with the TV. Screws (m8) (used in step 2 and 3) 2 3 Attach the stand neck to the stand base, insert and tighten the 4 screws into the 4 holes on the bottom of the stand base (1).
Connecting external devices You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from INPUT on the remote control unit or INPUT on the TV. CAUTION • To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital TV STB (Set Top Box), PC or other external equipment.
Remote control unit 1 13 14 2 3 15 4 5 16 6 7 8 18 9 10 11 12 17 19 20 21 22 * 23 8 MPX Select the sound multiplex mode. 9 WIDE Change the screen mode. (See page 10.) 10 MENU Display the menu screen. 11 Colour (Red/Green/Yellow/Blue) TELETEXT mode: Select a page. (See page 15.) 12 m (TELETEXT), k (Reveal hidden for TELETEXT), [ (SUBTITLE for TELETEXT), 3 (Hold), 1 (Subpage), v (Top/Bottom/Full) Use for TELETEXT mode. (See page 15.) 13 POWER (On/Off) To switch the power on and off. (See page 6.
Part names TV (Front) Remote control sensor OPC sensor POWER indicator Lighted (Orange) The TV is in power-on timer mode. Lighted (Red) The TV is off (standby mode). Lighted (Green) The TV is on. TV (Rear) SERVICE ONLY terminal ** 1 2 INPUT 3 3 4 6 7 5 1 2 3 4 5 6 7 8 • The speakers do not output volume when headphones are plugged in.
Initial auto installation When the TV powers on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. 1 Press POWER on the TV. 2 Press a/b to select the desired language, and then press ENTER. 3 Press a/b to select “HOME” or “STORE”, and then press ENTER. Press a/b to select your county channels listed on the screen, and then press ENTER. Press a/b to select “ATV”, “DTV” or “ATV&DTV”, and then press ENTER.
Video menu (Continued) Audio menu H OPC (Optical Picture Control) setting You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions. Selected item Video Automatically adjusts. Off The brightness is fixed at the value set in “Back Light”. NOTE • Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light. H Colour Temperature Adjusts the colour temperature to give the best white image.
Single RF Scan (Digital only) TV menu Video Audio Audio Channel TV Setup Parental Stereo Channels Select RF Channel that you want to scan by pressing c/d, then press ENTER to start scanning. When channel programmes are found, the Signal Level and Signal Quality will be displayed. Channel Skip Selected channels are passed over when using CH a/b even if selected while watching the image from the TV.
TV menu (Continued) Setup menu Channels Video Analogue Channel Fine Tune You can adjust the frequency to your desired position. 1 2 3 Go to “MENU” > “TV” > “Channels” > “Analogue Channel Fine Tune”, and then press ENTER. Adjust the frequency by pressing c/d while checking the background picture as a reference, and then press ENTER to set. Clear Channel List Channel list will be reset to clear. 1 Go to “MENU” > “TV” > “Channels” > “Clear Channel List”, and then press ENTER.
Setup menu (Continued) H Blue Mute Automatically turns the screen blue if a broadcast signal is not received. (On, Off) H No signal off You can set the TV to automatically power off in about 15 minutes after the TV goes into a state of receiving no programme signals, such as the end of a broadcast day. (Enable, Disable) NOTE • “Disable” is the factory preset value. • When a TV programme finishes, and the TV receives signal input, this function may not operate.
Setup menu (Continued) H Version Up This function allows you to update to the latest software using a USB device. You must update the software through the USB terminal. the USB device containing the software 1 Insert update file, and the TV will switch to USB input automatically. 2 Press INPUT to switch to other input, go to “Menu” > “Setup” > “Version Up”, and then press ENTER. H Version Info You can check the current version of the software on the screen.
Parental menu (Continued) Selected Description item Block R and Not for children under age 18. Strong above elements of sex and/or violence. Block All Block programmes of all ratings. (However, if a programme is not rated, it will not be blocked.) No block Cancel the blocking. H Change Password Register a four-digit password number to use the “Password” function. 1 Press a/b to select “Change Password”, and then press ENTER. 2 Enter the four-digit number as a password using 0—9 numeric buttons.
Using the type filter EPG What is EPG? An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG is broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a programme and view the programme schedule in detail.
PC compatibility chart Teletext function What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. News, weather reports, sports information, stock exchange prices and programme previews are among the many services available. Turning on and off Teletext 1 Select a TV channel or external input source providing the Teletext programme. 2 Press m to display the Teletext. 3 Each time you press m, the screen switches as shown below.
USB Media Player Connecting a USB device Connect a USB device to the TV as shown below. List of files compatible with USB mode USB device USB Memory, USB card reader (Mass Storage class) File system FAT/FAT32/NTFS Photo file format JPEG (.jpg) (DCF2.0 compliant) Music file format MP3 (.mp3) Bit rate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k, 192 k, 224 k, 256 k, 320 kbps Sampling frequency: 32 k, 44.
USB Media Player (Continued) Video mode 1 Press c/d to select “Video”, and then press ENTER. 2 Press a/b/c/d to select the desired video, and then press ENTER. Video mode/Music mode Buttons Description F /d Pause/Play back. H Stop operation. J Fast forward operation. S Rewind operation. Select the previous file. Select the next file. Photo mode H Viewing thumbnails 01/01 / Photo P1040252.JPG 2011:05:06 17:12:30 2048x1536 1491066 Byte Press MENU to display the video menu.
Controlling HDMI devices This system is using the HDMI CEC (Consumer Electronics Control) technology. What you can do with CEC capable using HDMI devices ✓ One Touch Play While the TV is in power on, it automatically plays back the image from the HDMI source. While the TV is in power off (standby mode), it automatically turns on and it plays back the image from the HDMI source.
Appendix Troubleshooting The problems described below are not always caused by malfunctions. Check the TV again before having the TV serviced. Problem Possible Solution • No power. • When the POWER switch does not work, remove the power plug and insert it again, and then press POWER on the TV after waiting for more than five seconds. • Is the AC cord disconnected? • Has the power been turned on? (See page 6.) • Unit cannot be operated. • External influences such as lightning, static electricity, etc.
Specifications Item Model LC-24LE430X LC-32LE430X LCD panel with LED backlight 23.6o (599 mm) TFT LCD Resolution 2,073,600 pixels (1920 g 1080) 1,049,088 pixels (1366 g 768) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 DVB-T 43.25 — 863.
Protection against overturning There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the following tip-resistant measurement for your safety. Fixing the TV to the table 1 Rotate the restraining band out from the bottom of the TV stand. The band should be aligned flat on the table and perpendicular to the stand. 2 Fix the TV to the table by a screw (commercially available). Use the screw of M4 x L12 (min), whose shape is compatible with the band.
Memo LC24LE430X_EN.
Memo LC24LE430X_EN.
Memo LC24LE430X_EN.
LC24LE430X_EN.
Printed in China 11P07-MA-NP LC24LE430X_EN.