######### LCD COLOR TELEVISION/ DVD VIDEO PLAYER MODEL LC-26DV10U In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used. CONTENTS • SERVICING NOTICES ON CHECKING .............................................................................. • HOW TO ORDER PARTS ....................................................................................................
SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES As for the places which need special attentions, they are indicated with the labels or seals on the cabinet, chassis and parts. Make sure to keep the indications and notices in the operation manual. 2. AVOID AN ELECTRIC SHOCK There is a high voltage part inside. Avoid an electric shock while the electric current is flowing. 3. USE THE DESIGNATED PARTS 6.
WHEN REPLACING DVD DECK [ When removing the DVD Deck ] Before removing Pick Up PCB and DVD PCB connector, the short circuit the position shown in Fig. 1 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. [ When installing the DVD Deck ] Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector. NOTE • Before your operation, please read “PREPARATION OF SERVICING”. • Use the Lead Free solder.
DISC REMOVAL METHOD AT NO POWER SUPPLY 1. Remove the Back Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) 2. Slide the Rack Loading toward the arrow direction by hand to release the lock. (Refer to Fig. 1) 3. Take out the Disc from the DVD Deck. Be careful not to scratch on the Disc. DVD Deck Rack Loading Fig. 1 PARENTAL CONTROL - RATING LEVEL 4 DIGIT PASSWORD CANCELLATION If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. 1. 2. 3. 4.
ABOUT LEAD FREE SOLDER (PbF) Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF printing on the PCB. (Please refer to figures.) Caution: • Pb free solder has a higher melting point than standard solder; Typically the melting point is 86°F~104°F(30°C~40°C) higher. Please use a soldering iron with temperature control and adjust it to 650°F ± 20°F (350°C ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long.
GENERAL SPECIFICATIONS G-1 TV System LCD LCD Size / Visual Size LCD Type Number of Pixels View Range Left/Right Up/Down Color System Speaker Position Size Impedance Max 10%(Typical) Sound Output G-2 DVD System Color System Disc Disc Diameter Drive Search speed Fwd Actual Rev Actual Slow speed Fwd Actual Rev Actual G-3 Tuning System Broadcasting System Tuner and Receive CH Intermediate Frequency G-4 Signal Digital Analog Preset CH Stereo/Dual TV Sound Tuner Sound Muting Video Signal RGB Si
GENERAL SPECIFICATIONS G-9 G-10 Clock and Timer Remote Control Clock Sleep Timer Max Time Step Program Program On Timer Off Timer Game Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than Unit Glow in Dark Remocon Remocon Format Format Custom Code Power Source Voltage(D.
GENERAL SPECIFICATIONS G-11 Features (TV) Auto Shut Off Auto Search Power On Memory Comb Filter Yes No No Yes 3 -D Game Position Auto Setup(Language/CH Program) Picture Setting(TV) AV Mode(Picture Preference) Brightness , Contrast , Color Tint Sharpness Color Temperature Cable Clear Audio MTS Tone Control (Bass/Treble/Balance) Stable Sound Surround BBE SRS WOW (SRS 3D/Focus/Tru Bass) Valiable Audio Out Tuning CH Program Air/Cable ADD/DELETE Label CH Label Video Label Favorite CH V-Chip Type RRT Setup Lo
GENERAL SPECIFICATIONS Component Input 720x480i (4:3) 720x480i (16:9) 720x480p (4:3) 720x480p (16:9) 720x576i (4:3) 720x576i (16:9) 720x576p (4:3) 720x576p (16:9) 1280x720p 1920x1080i Features (DVD) Video CD Playback SVCD Playback MP3 Playback JPEG WMA Digital Out Down Mix Out G-12 Accessories Closed Caption Screen Saver Audio DAC Owner's Manual (Dolby Digital) (MPEG) (PCM) (DTS) (Dolby Digital) (DTS) Language w/Guarantee Card Remote Control Unit Rod Antenna Poles Terminal Loop Antenna Terminal U/V
GENERAL SPECIFICATIONS G-13 Interface Switch Top Rear Indicator Terminals Rear Side G-14 Set Size G-15 Weight G-16 Carton Power (Tact) Channel Up/Menu Up Channel Down/Menu Down Volume Up/Menu > Volume Down/Menu < Menu Play Eject Skip+, Search+ Skip-, SearchStill/Pause Stop Main Power SW Input Select Main Power SW Power/Stand-By On Timer Video Input 1 Audio Input 1 S - Input 1 Video Input 2 Audio Input 2 S - Input 2 Video Output Audio Output Component Input 1 Analog Audio Component Input 2 Analo
DISASSEMBLY INSTRUCTIONS 1-3: PCB ASS'Y (Refer to Fig. 1-3) 1. REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS 1. Disconnect the following connectors: (CP506, CP507, CP508, CP510, CP511, CP512). 2. Remove the 9 screws 1. 3. Remove the Holder AC-Inlet and Power PCB in the direction of arrow (A). 4. Disconnect the following connectors: (CP802, CP803, CP2200, CP3201, CP3602, CP7203). 5. Remove the 10 screws 2. 6. Remove the Shield Scaler and Scaler PCB in the direction of arrow (B). 7.
DISASSEMBLY INSTRUCTIONS 1-4: LCD COVER/LCD PANEL (Refer to Fig. 1-4) 1. 2. 3. 4. Remove the 8 screws 1. Remove the LCD Cover in the direction of arrow (A). Remove the 4 screws 2. Remove the LCD Panel in the direction of arrow (B). 1 1 2 1 1 1 2 1 1 2 2 1 LCD Cover (B) LCD Panel Front Cabinet (A) Fig.
DISASSEMBLY INSTRUCTIONS 2-2: SWITCH PCB ASS'Y/GEAR MIDDLE/GEAR FEED/RACK FEED ASS'Y/FEED MOTOR (Refer to Fig. 2-2-A) 2. REMOVAL OF DVD DECK PARTS NOTE 1. Remove the Insulator (F). 2. Remove the Insulator (R). 3. Unlock the support 1. 4. Remove the Gear Middle. 5. Remove the screw 2. 6. Remove the Rack Feed Ass'y. 7. Remove the screw 3. 8. Remove the Switch PCB Ass'y. 9. Remove the screw 4. 10. Remove the Gear Feed. 11. Remove the 2 screws 5. 12. Remove the Feed Motor. 13. Remove the Gear Motor. 1.
DISASSEMBLY INSTRUCTIONS [ 6 pin FFC ] Gear Motor 40 ± 1mm 8.0 ± 0.2mm Fold Printing Surface Feed Motor Safety surface for pressing of the insert. Fig. 2-2-C Fig. 2-3-B Switch PCB Ass'y ~ FEED MOTOR ~ WHITE (4) BROWN (3) • Install wire from (1) to (4) in order. ~ SPINDLE MOTOR ~ YELLOW (2) GREEN (1) Fig. 2-2-D Traverse Ass'y Check Hook Check Hook Check Hook Check Hook • Loosen the wire in the direction of the arrow. Fig. 2-2-E 2-3: FFC WIRE HANDLING 1.
DISASSEMBLY INSTRUCTIONS 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using tweezers and remove the IC by moving with the IC desoldering machine. (Refer to Fig. 3-3.) 3. REMOVAL AND INSTALLATION OF FLAT PACKAGE IC REMOVAL NOTE 1. Put Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage. (Refer to Fig. 3-1.
DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thintip Soldering Iron. (Refer to Fig. 3-8.) 1. Take care of the polarity of new IC and then install the new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily. (Refer to Fig. 3-5.) Thin-tip Soldering Iron IC Soldering Iron Fig. 3-8 5.
SERVICE MODE LIST This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than the standard time in the appropriate condition. (See below chart.) Set Condition Set Key Remocon Key Standard Time TV mode VOL. DOWN (Minimum) 0 2 sec. Releasing of V-CHIP PASSWORD. TV mode VOL. DOWN (Minimum) 1 2 sec.
WHEN REPLACING EEPROM (MEMORY) IC CONFIRMATION OF CHECK SUM, POWER ON TOTAL HOURS, MICON VERSION AND DIGITAL TV MICON FIRMWARE Initial total of MEMORY IC, POWER ON total hours, MICON VERSION and Digital TV MICON Firmware can be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0". Please refer to "CONFIRMATION OF INITIAL DATA" when SUM DATA is not corresponding. 1. Turn on the POWER, and set to the TV mode. 2.
RE-WRITE FOR DIGITAL SOFT FIRMWARE JG176 USA HD DTV ROM DISC Ref. No. JG176 Part No. APJG176095 Remarks Parts Name USA HD DTV ROM DISC Up-Date of the Firmware NOTE: The operating manual for Re-writing is included in USA HD DTV ROM DISC (JG176). Prepare the following tools for Up-Date of the Firmware.
ELECTRICAL ADJUSTMENTS 1. ADJUSTMENT PROCEDURE NO. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 Read and perform these adjustments when repairing the circuits or replacing electrical parts or PCB assemblies. CAUTION • Use an isolation transformer when performing any service on this chassis. • When removing a PCB or related component, after unfastening or changing a wire, be sure to put the wire back in its original position.
ELECTRICAL ADJUSTMENTS 2-2: Confirmation of Fixed Value (Step No.) Please check if the fixed values of each of the adjustment items are set correctly referring below. (TV/AV/YUV/HD-MI) NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 22 22 24 25 26 27 28 29 30 31 35 36 37 38 39 40 63 64 65 66 66 66 66 66 67 67 67 67 67 YUV 480p 720p TV TV 720p AV AV (S) 480i FUNCTION Step No. Step No. Step No. Step No. Step No. Step No.
ELECTRICAL ADJUSTMENTS 3.
TROUBLESHOOTING GUIDE POWER DOES NOT TURN ON IS F501 BROKEN ? YES CHANGE F501. NO IS THERE VOLTAGE AT PIN 4 OF IC503 20.5V ? NO CHECK IC503 AND PERIPHERAL CIRCUIT. YES IS THERE VOLTAGE AT PIN 4 OF IC506 AT5V ? NO CHECK IC506 AND PERIPHERAL CIRCUIT. OR CHANGE POWER PCB. NO CHECK IC3804 AND PERIPHERAL CIRCUIT. OR CHANGE AV PCB. YES IS THERE VOLTAGE AT PIN 2 OF IC3804 AT3.3V ? YES CHANGE SCALER PCB.
TROUBLESHOOTING GUIDE THE PICTURE DOES NOT APPEAR (1). DOSE BACK LIGHT SHINE ? NO NO CHECK IC502, T502 AND PERIPHERAL CIRCUIT. YES YES IS CD7204 CONNECTED ? IS THERE VOLTAGE AT PINS 1, 2, 3, 4 AND 5 OF CP503 24V ? NO CONNECT CD7204. YES IS THERE SIGNAL AT CP7204 ? YES CHANGE V2301. NO IS THERE SIGNAL AT IC7201 ? NO CHANGE IC7201. YES CHECK IC801. OR CHANGE SCALER PCB.
TROUBLESHOOTING GUIDE THE PICTURE DOES NOT APPEAR (2). IS THERE SIGNAL AT IC4201 ? NO CHECK IC4201 AND PERIPHERAL CIRCUIT. NO CONNECT CD4203. CHECK IC4201 AND PERIPHERAL CIRCUIT. YES IS CD4203 CONNECTED AND IS THERE SIGNAL ? YES CHECK IC801 AND PERIPHERAL CIRCUIT.
TROUBLESHOOTING GUIDE THE PICTURE APPEARS, BUT THE AUDIO DOES NOT APPEAR. IS CD301 AND CD303 CONNECTED ? NO CONNECT CD301 AND CD303. YES IS THERE SIGNAL CD301 AND CD303 ? YES CHANGE SP301 AND SP302. NO IS THERE SIGNAL AT PINS 11 AND 15 OF IC301 ? YES CHECK IC301 AND PERIPHERAL CIRCUIT. NO IS THERE SIGNAL AT PINS 27 AND 28 OF IC904 ? NO CHECK IC904 AND PERIPHERAL CIRCUIT. YES CHANGE AV PCB.
TROUBLESHOOTING GUIDE THE STOP PICTURE "PLEASE WAIT". IS CD3806 CONNECTED ? NO CONNECT CD3806. YES IS DIGITAL PCB CONNECTED ? NO CONNECT DIGITAL PCB. YES IS THERE VOLTAGE AT PINS 1 AND 2 OF CD3806 5V ? NO CHECK Q512, IC509 AND PERIPHERAL CIRCUIT. YES CHANGE DIGITAL PCB.
TROUBLESHOOTING GUIDE THE COLOR DOES NOT APPEAR. IS SETTING OF COLOR NORMAL ? NO CHANGE THE SETTING OF COLOR. YES IS THE COLOR SIGNAL RECEIVED ? NO RECEIVE THE COLOR SIGNAL. YES IS THERE SIGNAL AT IC801 ? NO CHECK IC801 AND PERIPHERAL CIRUCUIT. NO CHECK IC7201 AND PERIPHERAL CIRUCUIT. YES IS THERE SIGNAL AT IC7201 ? YES CHANGE SCALER PCB.
TROUBLESHOOTING GUIDE ON SCREEN DISPLAY DOES NOT APPEAR. IS THERE SIGNAL AT PINS 2, 3, 4 AND 5 OF IC101 ? NO CHECK IC101 AND PERIPHERAL CIRCUIT. YES IS THE COLOR SIGNAL AT PINS 57, 58, 59 AND 60 OF IC801 ? NO CHECK IC801AND PERIPHERAL CIRCUIT. YES CHANGE SCALER PCB.
TROUBLESHOOTING GUIDE (DVD SECTION) DOES NOT DISPLAY DVD PICTURE DOES THIS DISPLAY YES CHECK THE DISC. LOGO PICTURE ? NO DOES THIS HAVE SIGNAL AT PINS 151 AND 153 OF CHECK PINS 9 AND 7 OF CD703 AND PERIPHERAL YES IC4001 ? CIRCUIT. NO DOES IC4001 GETS YES CHANGE IC4001. P.CON+3.3V AND P.CON+1.8V ? NO CHECK P.CON+3.3V AND P.CON+1.8V LINE.
TROUBLESHOOTING GUIDE DISC DOES NOT EJECT. DOES OSD APPEAR ON THE SCREEN ? NO IS REMOTE KEY SET EFFECTIVELY ? NO CHECK PINS 29 AND 30 OF IC101 AND PERIPHERAL CIRCUIT. YES YES CHECK PINS 205 AND 206 OF IC4001 AND PERIPHERAL CIRCUIT. DOES THIS EJECT DISC AT CHANGE DVD DECK ? YES NO DOES THIS HAVE NO SIGNAL AT PINS 4 AND 5 OF CP2302 ? CHECK IC2301 AND PERIPHERAL CIRCUIT. YES CHANGE DVD DECK. DOES THIS HAVE SIGNAL AT PINS 1 AND 2 OF CP2302 ? YES CHANGE IC4001. E-9 NO CHANGE IC2301.
TROUBLESHOOTING GUIDE DOSE NOT PLAY DVD. CHANGE DVD DECK. NO DOES THIS DISPLAY "INCORRECT DISC". YES DOES CD2001 YES CONNECT WITH CP2301 CORRECTLY ? NO NO CONNECT CD2301. DOES THIS DISPLAY NO CHANGE IC4001. READING MARK ? YES NO DOES DISC ROTATE ? CHANGE DVD DECK. YES CHANGE IC4001. E-10 IS THEVOLTAGE BETWEEN JG017 AND JG018 LESS THAN 0.
TROUBLESHOOTING GUIDE DOES NOT PLAY CD. CHANGE DVD DECK. NO DOES THIS DISPLAY "INCORRECT DISC". YES DOES CD2001 YES CONNECT WITH CP2301 CORRECTLY ? NO NO CONNECT CD2301. DOES THIS DISPLAY NO CHANGE IC4001. READING MARK ? YES NO DOES DISC ROTATE ? CHANGE DVD DECK. YES CHANGE IC4001. E-11 IS THE VOLTAGE BETWEEN JG019 AND JG018 LESS THAN 0.
TROUBLESHOOTING GUIDE NO SOUND DVD/CD ANALOG AUDIO. DOES THIS HAVE YES REFER TO "LCD SECTION". SIGNAL AT PINS 3 AND 5 OF CD703 ? NO DOES THIS HAVE SIGNAL AT PINS 7 AND CHECK PINS 7 AND 8 OF YES IC8502 AND PERIPHERAL CIRCUIT. 8 OF IC8502 ? NO DOES THIS HAVE SIGNAL AT PINS 113, 115, 116 YES CHANGE IC8502. AND 118 OF IC4001 ? NO CHANGE IC4001. NO SOUND DVD/CD DIGITAL AUDIO. DOES THIS HAVE YES CHECK J4202 AND SIGNAL AT PIN 1 OF CD703 ? PERIPHERAL CIRCUIT.
DVD BLOCK DIAGRAM LCD BLOCK DVD LOADER DSM2 E C, D DVD/CDPD TX RF_A, B, C, D, E, F RX START_SW OPU SPDIF DVD/CD, DVD_LD, CD_LD SPINDLE/ STEPING/ SLED MOTOR TR+/-, FO+/-, MOT_LD+/-, MOT_SLED+/-, MOT_SPDL+/- Motor Drive IC2301 LA6565VR SPINDLE/SLED/ FOCUS/TRACK_PWM, TRAY_CLOSE/OPEN MPEG/MICON/DSP/RF_AMP IC4001 ZR36862PQCG-B DVD C DVD Y DVD RESET DVD POWER ADCIN_5, 6, 7 A HOME, TIN_SW, TOUT_SW C F-1 FLASH 16M IC4007 SST39VF1601-70-4C-EKE RAMDQM, CLK, CKE, WE#, CAS#, RAS#, CS0#, CS1#, SD_BA
SCALER/LVDS/MICON/ADC/JACK/AV SWITCH1/REGULATOR BLOCK DIAGRAM DIGITAL RGB INTERFACE A/D CONVERTER IC2101 MST9883C-LF-110 DDVS DDHS 56 DIGITAL 24bit RGB D_CLK, D_EN, D_HS, D_VS DIGITAL 24bit RGB D_CLK, D_EN, D_HS, D_VS 58 27 28 57 SCALER IC801 R8J66604A72FP LVDS IC IC7202 DTC34LM85AL 84 X801 54MHz 42 TX OUT0~3+ TX OUT0~3TXCLKOUT+ TXCLKOUT- LCD PANEL V2301 V320B1-L01 85 57 60 SW_CVBS SW_Y SW_C 4SI_SDA_IN/4SI_SCL 4SI_CHIP_SE/4SI_SDA_OUT SW VIDEO_Y EEPROM IC 256K IC103 AT24C256N-10 SU-2.
AV SWITCH2/STEREO/SOUND AMP BLOCK DIAGRAM AV SW IC4201 AN15853B-E1 24 SDA 25 SCL 28 SW_A_IN_R INPUT 1/2 J4205 SAV-12CP-01Z5 V1-V 2 14 V1-Y 4 3 V1-C 6 4 V1-L 3 17 VL-R 5 20 V1-L 20 9 VL-R 22 10 V2-V 9 15 V2-R 12 18 V2-L 10 22 30 SW_A_IN_L 31 SW_CVBS SW_CVBS SCALER/LVDS/ MICON/ADC/JACK/ AV SWITCH1/ REGULATOR SW_Y 33 SW_Y 2 SW_C 35 SW_C 5 16 TUNER_V V_OUT SIF_OUT TUNER/DIGITAL/ POWER AUDIO_IN 4/5 J4204 AV2-67A03-01 CS_IN 4 J4211 AV3-67A02-01H STEREO IC904 MSP4440G-
TUNER/DIGITAL/POWER BLOCK DIAGRAM 4 AA CLKAB 4 REG 1.8V IC3403 BD7820FP 2 EEP ROM IC2404 BR24L64-WE2 +3.3V REG 2.6V IC3404 BA7810HFP SCL V_OUT +5V SIF IF_OUT1 IF_OUT2 7 9 10 13 14 15 19 20 2 UNREG 4V +3.3V ATSC/CLER CABLE ASIC IC2401 X240H I2CDATA 4 UNREG 4V 4 +1.2V X2401 55.474MHz X2402 25.140MHz 2 2 UNREG 5V 256Mbit DDR SDRAM IC2403 HY5DU561622ETP-D43 DQA AA CLKAB DQA 256Mbit DDR SDRAM IC2402 HY5DU561622ETP-D43 REG 3.
INTERFACE BLOCK DIAGRAM EEP_ROM IC3601 BR24L02F-WE2 HDMI INTERFACE IC3603 SiI9011CLU 5 SDA GND 4 QE19 96 6 SCL A2 3 QE18 99 7 WP A1 2 8 VCC A0 1 QE16 101 QE15 102 QE12 105 HDMI Port Protection IC3605 CM2021-00TR QE8 111 22 DDC_CLK_OUT QE7 114 DDC_DAT_IN 18 39 DSDA QE4 117 DDC_CLK_IN 17 40 DSCL QE3 121 QE0 124 54 RX055 RX0+ 58 RX159 RX1+ ODCLK 119 DDCK HSYNC 128 DDHS VSYNC 1 SCK 76 WS 75 SD0 74 IOVCC 7 IOVCC 19 62 RX263 RX2+ SCALER/LVDS/ MICON/ADC/JACK/ AV SWI
MICON2 BLOCK DIAGRAM HDMI MICON IC IC3611 SST89E58RD2-40-C-TQJE(HD101) 36 RX1_RST RXT_RST# 8 RX1_INT H_INT X1 15 X2 14 X3601 11.
POWER BLOCK DIAGRAM AC IN F501 L506 L507 1 2 1 2 3 4 3 4 POWER SW CTL IC502 STR-X6737 D 1 TRANSFORMER T502 S Vcc FB 2 4 6 10 RY501 11 1 14 8 D507 4 4 3 +24V(INVERTER) 15 7 REGULATOR IC504 KIA431A-AT RELAY RY501 C510 1 FEED BACK IC512 PS2561AL1-1-V(W) 2 P.CON+5V 4 1 3 2 1 2 3 TRANSFORMER T501 8 POWER SW CTL IC503 STR-W6735 5 D 1 11 SOUND+B Q504 12 SW 5V REGULATOR IC506 BA00BC0WCP-V5E2 13 S Vcc FB 2 4 6 2 14 P.
PRINTED CIRCUIT BOARDS SCALER (BOTTOM SIDE) D802 B3603 CP3601 IC3605 C3601 J4301 R4314 C4366 R2112 C8150 NR2104 NR2102 NR2103 NR2101 W886 W888 R2114 C2142 C2139 C128 C3620 C3604 C3630 R3670 R3612 C3628 R3630 C7238 B4308 D805 D803 IC801 C892 C891 L2103 IC3601 C7242 C7241 C7240 C7239 C858 C868 W905 R833 NR802NR803NR804NR805NR806NR807 CEF170A R158 R102 R8103 R8102 D106 R8101 W897 R175 R103 R104 R200 D4310 R160 R161 R199 C107 R194 R131 C123 R3238 R3211 W843 R3212 R8104 R
PRINTED CIRCUIT BOARDS DVD (TOP SIDE) DVD (BOTTOM SIDE) DEF092A DEF092A SW2254_2 SW2255_2 SW2252_2 SW2253_2 R2253 R2251 C2310_1 R2255 R2252 CP2251 D8509 R2349 R2352 R2342 R2350 R2353 R2254 R8513 R8512 C2301 C8521_1 B8503 W842 W836 R4043 C4057 B4013 R4051 W840 B4014 C4002 D4002 B4016 C4056 B4012 D4003 C4075 C4017 C4016 W859 R2309 C4082 R4040 W854 R4037 R4038 R4054 R4053 B4005 B4007 C4095 C4067_1 B2304 R4039 C4091 Q2303 R4036 C2326 R2306 R2318 R2341 B2302 B2301 B2305
W942 R311 C3805 W839 C904 W887 CP4204 Q4403 C4406 L4401 Q301 W802 C5838 C5839 CP5802 Q302 W803 L901 C3826 R324 C906 C3827 C3852 C3850 8 W858 L3804 L3801 C3803 80 R3805 R3801 L3803 R3811 D3804 C3820 W876 R4401 R4402 W870 W878 B3801 D3801 L3809 P3 L3810 C3810 C3818 L3807 C3825 Q4409 Q4401 C4408 C5837 C5836 C5826 L4202 C4262 C4243 C4203 C4242 C319 W856 W857 C320 R4408 C4403 R4231 C4401 C4404 CP4203 C4260 CP5801 C4252 L4203 L4206 L4207 TU5801 SH4
G-7 W912 W913 R4226 C349 D302 C359 W854 W853 W855 C353 C355 D304 C354 C362 C350 R314 C348 D303 R315 C957 C351 D305 C363 C352 C338 C956 C944 R304 C358 C959 W927 R3809 R4424 C4428 R4432 R4429 R4431 R4430 R4446 R4435 R4437 R4451 R4444 R4445 R4441 R4436 R4433 R3817 R3818 C4445 W896 W897 C3812 W842 R3814 R3815 R3816 C3811 R3813 C4436 C3808 W909 C3809 C3807 R3819 R4221 R4237 C943 C945 C954 C940 C942 C926 W930 C958 R302 R3835 R3831 R4450 C4234 B4202
PRINTED CIRCUIT BOARDS POWER/OPERATION1/REMOCON (INSERTED PARTS) SOLDER SIDE CP512 CEF183A CP510 R576 C584 SH504 D543 D534 C562_1 CP508 IC506 L504 W047 Q512 L505 C555 W822 W041 W028 W025 R561 C538 W823 W022 W027 C560 D514 IC508 W821 D530 D531 C549 CEF182A W013 W820 IC504 W014 R513 R518 CP506 C501 D512 R501 C537 R543 IC512 D527 HS503 W044 R545 R502 D526 W036 R508 D525 CEF185A W033 W804 W043 W038 IC501 Q501 D501 D532 R517 R520 R516 T501 CP513 R525
G-11 R559 Q507 Q514 R553 R547 C580 Q505 C575 Q515 C571 C578 CEF171A C544 R556 R557 R558 R592 R583 R579 C554 D539 R587 R589 C565 R506 R505 R551 R550 C533 C534 R521 R552 R548 C504 C502 R509 R595 R591 R571 R568 Q513 C564 D538 D540 B507 B506 R577 R575 R580 R586 R590 R574 R573 R572 R564 C559 C556 C557 C553 R2201 C576 C574 Q508 R594 C566 R584 IC509 C563 C581 C577 R588 C573 CEF182A D542 D541 R2205 B505 B508 R585 R512 R514 CEF186A R2203 C552 R567 R2204 CEF185A R2
PRINTED CIRCUIT BOARDS DIGITAL (TOP SIDE) HS2401 C2506 L2414 C2570 R2525 C3407 R2527 C2572 L3401 R2530 R2531 R2447 R2448 C2471 C2569 R2524 R2520 C2561 C2564 R2410 R2532 L2412 C3432 R2522 R2526 C2571 L2413 C2485 C2484 C2483 C2482 C2481 R2528 C2563 NR2403 C2502 NR2405 C2486 C2503 C2562 R2409 R2529 C2467 R2429 C2504 L2411 R2521 AK1 AK30 CP2405 C3435 R2523 R2517 IC2403 R2537 C2478 NR2401 C2479 R2464 R2484 R2592 R2485 R2593 R2519 R2518 B2420 C2497 C2496 C2495 C2494 R25
A B C D E F G H MPEG/MICON/DSP/RF_AMP SCHEMATIC DIAGRAM (DVD PCB) C4013 0.1 F HD10 HA18 HD2 HA17 HD9 HA7 HD1 HA6 HD8 HA5 C4014 0.1 F C4016 0.1 F C4017 0.1 F 56 RAMADD(2) R4054 61 62 63 64 65 66 RX/RDY[I/O[0]] RF OPU_A OPU_B OPU_C SPDL_SENSOPU_D C4091 P.CON+3.3V_D C4072 0.1 F C4067_1 6.3V 47KA 0.1 F KA 6.3V 220 C4075 C4070 0.1 F C4076 C4071_1 6.3V 47KA B4018 MMZ1608R102CT 100P CH C4086 0.001 B C4085 0.001 B F R4001 390 +-1% R4018 4.7K 0.1 R4045 0 0 1.6 1.6 3.3 1.6 1.
A B C D E F G H MEMORY2 SCHEMATIC DIAGRAM 8 8 (DVD PCB) A17 DQ1 A7 2.6 RD DQ0 A5 DE# A4 0.1 F 0.1 F NC1 R4041 2.5 R4040 HA0 B4007 CE# A2 A0 A1 22 23 27 A3 24 2.6 VSS 26 0 STANDARD 1 2 3 4 5 6 7 8 9 50 49 DQ8 DQ7 3.2 NC 0.7 1.4 1.6 1.6 1.3 55 HA17 1.6 R4048_1 RAMCKE 1.7 47K CLK /CAS CKE /RAS NC /CS SD_A9 0 SD_A8 0.1 SD_A7 0.8 HA4 11 12 0.7 SD_D6 1.5 SD_D7 3.2 C4046_1 0 RAMDQM 3.2 /WE RAMWE# 3.2 RAMCAS# 3.2 RAMRAS# 3.
A B C D E F G H AUDIO/VIDEO SCHEMATIC DIAGRAM 8 8 (DVD PCB) C8522 DAC_C[U]C_VIDEO FROM/TO MPEG/MICON/DSP/RF_AMP 6.3V DAC_VIDEO_C DAC_VIDEO_B DAC_VIDEO_A 60 C8523 6.
A B C D E F G H MOTOR DRIVE SCHEMATIC DIAGRAM 8 0.1 B CD_LD DVD_LD C2318 0.001 B KA 6.3V 47 C2316_1 0.1 F C2346_1 6.3V 47 KA C2347 F 0.1 C2332 R2336 390 33K R2334 10K R2324 1K R2309 100 +-1% R2319 TP2320 75K 3.3K R2335 W861 4.7K R2327 5.6K TP2318 R2326 15K TP2319 VIN3 VIN3- NC VIN2 VIN2- VIN2+ NC 4 6.0 0 5 1.9 6 1.9 7 2.6 8 9 2.7 2.6 10 2.8 11 0 12 0 13 3.7 14 1.7 16 17 2.7 0 18 6.0 19 6.0 20 1.6 21 1.6 (M_GND) 22 1.6 3 YK R2357 0.1 B 2.
A B C D E F G H REGULATOR2 SCHEMATIC DIAGRAM 8 8 (DVD PCB) DVD_POWER_H FROM/TO POWER3 FROM/TO AUDIO/VIDEO P.CON+5V_D CD501(CP509) CU244202 1 ADAPTER+12V F3001 0.1 B SBPSC-11R310-101A 61 6.0 6.0 100uH 5 P.CON+A5V_D 11.9 11.9 6.9 0.1 F 3 FROM/TO MEMORY2 5.1 C3019_1 220 L3003 6.3V P.CON+A5V_D P.CON+3.3V_D GND (D_GND) 2.2uH 0305 C3018 1 F MHE 0.1 F C3017 C3016_1 16V 100 MHE 6.02 0.1 B C3005 68K R3006 10K +-1% R3004 2 0 0.04 6.4 R3019 6.4 6 COM V_OUT 1 1.
A B C D E F G H ASIC SCHEMATIC DIAGRAM 8 (DIGITAL PCB) 0.1 B 1.2 C2583 0.1 B 1.2 C2584 0.1 B 1.2 C2585 0.1 B 1.2 0.1 B 1.2 C2411 1B 1.2 C2412 0.1 B 1.2 C2413 0.1 B C2414 1.2 0.1 B 1.2 C2415 0.1 B 1.2 C2416 1B 1.2 C2417 C2418 C2419 C2420 C2587 C2588 0.1 B 1.2 0.1 B 1.2 0.1 B 1.2 1B 1.2 0.1 B 1.2 0.1 B 1.2 C2589 0.1 B 1.2 C2590 0.1 B 1.2 C2421 0.1 B 1.2 C2422 0.1 B 1.
A B C D E F G H SDRAM SCHEMATIC DIAGRAM 8 8 2.6 MEM_DQ18 2.6 MEM_DQ19 2.6 MEM_DQ20 2.6 MEM_DQ21 2.6 MEM_DQ22 2.6 MEM_DQ23 2.6 MEM_DQ24 4 2.6 MEM_DQ25 2.6 MEM_DQ26 2.6 MEM_DQ27 2.6 MEM_DQ28 2.6 MEM_DQ29 2.6 MEM_DQ30 2.6 MEM_DQ31 2.6 MDQM0 2.6 MDQM1 2.6 MDQM2 2.6 MDQM3 2.6 MQS0 2.
A B C D E F G H FLASH SCHEMATIC DIAGRAM 8 8 NFIO0 NFIO1 NFIO2 NFIO3 NFIO4 NFIO5 ATSC/CLEAR CABLE ASIC X240H IC2401 (7/14 FLEX BUS) NFIO6 ATSC/CLEAR CABLE ASIC X240H IC2401 (6/14 FLASH) NFIO7 (DIGITAL PCB) C2509 0.1 B B6 NC 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 N28 NFRY_BYb NC E2 FAD(5) FSTB A4 NC N27 NFCEb(0) D1 NC 3.3 F4 3.3 E3 3.
A B C D E F G H FRONT END SCHEMATIC DIAGRAM 8 8 (DIGITAL PCB) ATSC/CLEAR CABLE ASIC DVSYDATA(2) NC NC V2 DVIDATA(4) DVSYDATA(3) AJ3 NC NC V3 DVIDATA(5) DVSYDATA(4) AH4 NC NC V4 DVIDATA(6) DVSYDATA(5) AG5 NC NC U1 DVIDATA(7) DVSYDATA(6) AJ2 NC NC U2 DVIDATA(8) DVSYDATA(7) AH3 NC NC U3 DVIDATA(9) NC U4 DVIDATA(10) NC T1 DVIDATA(11) DVIDATA(14) TDATA(1) L3 NC NC P1 DVIDATA(15) TDATA(2) K1 NC 4 DVIDATA(16) TDATA(3) L4 P3 DVIDATA(17) TDATA(4)
A B C D E F G H AV OUT SCHEMATIC DIAGRAM 17 18 19 20 GND IF OUT1 IF OUT2 15 16 14 RF_SW GND 13 TU I2C CLK IF AGC 12 9 10 I2SSDO_IN TU I2C DATA 8 I2SSCLK_OUTA 11 7 I2SSDO_OUTA I2SWS_OUTA I2SWS_IN 5 6 4 I2SSOCK_OUTA 3 RX (X240) 7 T_FAT_IFN T_FAT_IFP FAT_IFAGC B2424 BLM18BD102SN1 B2423 BLM18BD102SN1 RF_SW TUNER_SDA B2422 BLM18BD102SN1 TUNER_SCL B2421 BLM18BD102SN1 I2SCLK_INC I2SWS_INC I2SDATA_INC I2SDATA_OUTA I2SCLK_OUTA C2621 47PCH C2622 47PCH I2SWS_OUTA SPD
A B C D E F G H POWER2 SCHEMATIC DIAGRAM 8 8 D3407 RB520S-30-TE61 10 B B C3413 5 6 C3411 10.3 0.1 0.22 9 10 11 12 13 14 15 16 1 2 3 3.3 5.4 7 0 5.1 5.2 W808 5.2 10 B C3412 100 R3427 4.7uH ELLCTV4R7N 0.047 1/4W D3408 CORE_1.2V CORE_1.2V BLM31PG391SN1L 6 +1.8V D_GND R3428 C3416 C3415 0.047 1/4W 6.3V 100 TZV S1 G1 B3401 D1 D1 D2 D2 4 3 2 1 2.7 1.3 3.5 0 B3402 +3.3V RSX301L-30 BLM18PG330SN1D 3.3K SW 0 Q3403 KTC3875S_Y_RTK S2 0 2.
A B C D E AV SWITCH SCHEMATIC DIAGRAM 8 F G H (AV PCB) TR702 W5T29X7.5X19 W866 FROM/TO POWER 8 DVD_Y AT+3.3V AT+5V SIDE/DVD_Y P.CON+9V INVERTER_DET DVD_C GND OUT3 GND3 NC 7 IN3B IN3A B4203 16V L4202 V-S10 19 1 D_SW_1 0.1 B C4413 W870 S D 100 S D G R4234 100 R4233 5.6K G L4203 47uH 0305 47P CH C4265 47P CH C4264 16V 100V-S C4261 16V 100V-S C4260 1K R4409 B NC AV SW IC 20 18 3 STEREO_RESET 15 SCART3_SW 14 DTUNER_POWER 1.
A B C D E SWITCH/AMP SCHEMATIC DIAGRAM F G H (AV PCB) 8 8 FROM/TO AV JACK SW_YUV1/2 EXT_MUTE FROM/TO AV SWITCH B1 VCC FROM/TO SCALER(2/3) (CP802) Q4402 KRA102SRTK STANDBY_LED 4.7K FROM/TO TUNER REMOCON IN AFT LEVEL SHIFT HP_MUTE Q4403 KRC102SRTK AUDIO_MUTE W876 DTUNER_SPDIF AFT AFT_1 AFT_2 6 STANDBY LED 30 REMOCON_IN R4420 SW_SPDIF C4422 C4421 0.1 F 100 25V 10 KA 4 R4458 A 100 SW_SPDIF EXT_MUTE 7 AT+3.
A B C D E F G H AV JACK SCHEMATIC DIAGRAM 8 8 FROM/TO POWER GND P.
A B C D F G H STEREO SCHEMATIC DIAGRAM FROM/TO POWER W839 (AV PCB) B901 B902 I2SWS_OUTA FCM1608CF-600T06 B903 10V 220 L901 1K Q902 KTC3875S_Y_RTK R913 C906 I2SSD0_OUTA BLM18PG121SN1D YK GND 8 FROM/TO TUNER 10K R914 P.CON+5V 10K AT+5V R915 8 E I2SSCLK_OUTA BLM18PG121SN1D I2SSD0_IN Q901 KTC3875S_Y_RTK I2SWS_IN I2SSCLK_IN P.
A B C D E F G H SOUND AMP/HEADPHONE AMP SCHEMATIC DIAGRAM (AV PCB) 24.0 CPUMP DCAP1 PGND1 0 NC AGND1 F 0.1 B C354 C352 0.47 10 1/2W R320 C348 D302 0.47 B 0.47 B C349 B 0.
B C D E F G H POWER SCHEMATIC DIAGRAM D3811 (AV PCB) C3850 EC31QS04 0.01 B C3828 L3806 L3807 15uH SBPSC 10uH TSL0808 UNREG+5V UNREG+4V P.CON+32V 11 10 9 8 NC NC NC CP3 CP3 GND CP2 CP2 3 4 5 0 17.0 0.22 MMTS C3830 9.5 C3832 6 0.22 MMTS 7 30.6 FROM/TO SWITCH/AMP P.CON+9V P.CON+5V AT+5V AT+3.3V GND 5 FROM/TO STEREO P.CON+8V GND 15K GND FROM/TO AV SWITCH AT+5V AT+3.3V P.CON+9V P.
A B C D 8 E F G H 8 AV JACK2 SCHEMATIC DIAGRAM (AV PCB) 7 7 AUDIO_JACK_OUT_R 100 R W837 R4229 2.2K 0 0.3 0 KTC3875S_Y_RTK Q4207 MUTE 0 KTC3875S_Y_RTK 6 39K 2.2K 6 MUTE Q4209 R4221 0 R4226 39K 0.3 R4232 E L R4238 270 R4236 1 R4237 270 100 2 R4235 AUDIO_JACK_OUT_L 3 AUDIO OUT J4201 AV2-13P2-07H W822 H1 H2 FROM/TO STEREO 5 5 FROM/TO POWER P.CON+5V GND FROM/TO SWITCH/AMP EXT_MUTE 4 4 SW_SPDIF COAXIAL JACK J4202 AVG-2-13 E H B4202 2 1K C4234 0.
A B C D E F G H TUNER SCHEMATIC DIAGRAM 8 8 (AV PCB) 9 Y OUT 10 U OUT 11 GND 12 GND 13 V OUT 14 GND 15 GND 16 CVBS OUT 17 AUDIO MUTE-L 18 SD-H 19 AFT_1 20 AFT_2 TKC-W20P-U1 CP5802 1 DTV_RESET 2 DTV POWER 3 TX (X240) 4 RX (X240) 5 SPDIF OUT 6 I2SSOCK_OUTA 7 I2SSDO_OUTA 8 I2SWS_OUTA 9 I2SSCLK_OUTA 10 I2SSDO_IN 11 I2SWS_IN 12 I2SSCLK_IN 13 TU I2C DATA 14 TU I2C CLK 15 RF_SW 16 IF AGC 17 GND 18 GND 19 IF OUT1 20 IF OUT2 24 20 IF_OUT 2 W9
(SCALER PCB) 3.3 PSU_5VD/DSR LEVEL SHIFT Q104 KTK5132E G SCART_AUDIO_SW DVB_RESET-L DVB_POWER_CTL-H DVB_MUTE-L S R153 SD_H R141 D R137 DVB_ASPECT_IN HP_MUTE C116 7 4.7K R136 100 R142 4.7K 100 3.3 R195 5.6K R193 DVD_TX START_SW 5.0 R192 0 5.6K 100 3.
A B C D E F G H SCALER SCHEMATIC DIAGRAM 8 8 (SCALER PCB) FROM/TO TUNER/OUT JACK FROM/TO MICOM COMPONENT/HDMI CP802 (CP4204) 00_6232_030_006_800+ 1 STANDBY LED 5 6 7 8 4 9 10 DTUNER_H DVB_MUTE-L DTV_MUTE_L GND/INV_DET 0.1 B GND DVB_TX DTUNER_TX GND GND SW_AUDIO_L(PC) SW_AUDIO_R[PC] SW_B/SW_CB W807 SW_AUDIO_L[PC] STEREO_RESET STEREO_RESET SCART3_SW SDA1 SCL1 20 GND 21 DTUNER_POWER 22 GND 23 DTUNER_SD_H 24 GND 25 SWITCH_CVBS 26 GND 27 SWITCH_VIDEO_Y 28 0.
A B C D E F G H ADC SCHEMATIC DIAGRAM 8 8 (SCALER PCB) FROM/TO MICOM SCL1 SDA1 7 7 DDHS 1 0.1 B C2125 R2111 0 470 C2145 0.9 C2143 0.5 4 C2132 0.1 0 B 0 0.1 B 22uH FROM/TO AV SWITCH1 27 SW_PR/R C2146 15PCH 40 0 R2109 1K R2108 NLCV32T L2107 0.047 B C2129 BUFFER Q2101 KTA1504S_Y_RTK 5.0 R2114 28 SW_Y/G 0.7 3 100 0 29 SW_PB/B C2142 22uH NLCV32T 100P CH 6.3V 220 V-S C2127 0.1 B C2126 6.3V 220 V-S C2121 10K R2117 10K 0.1 B R2116 C2113 0.
A B C D E LVDS SCHEMATIC DIAGRAM F G H (SCALER PCB) 8 LVDS IC7201 ICSV385AGLFT 0 FROM/TO MICOM POWER_ON-H DB9 3.3 DB3 3.3 3.3 DB4 4 0 3.3 DB5 3.3 DB6 3.3 DB7 TxOUT2+ R-FB TxCLKOUT- TxIN17 TxCLKOUT+ TxOUT3- TxIN18 TxOUT3+ TxIN19 GND LVDSGND TxIN20 PLLGND 6.3V 220 V-S C7202 L7201 C7203 0.1 B 0.1 B C7201 FROM/TO REGULATAR 3.3 DVS P.CON+3.3V 3.3 DR2 3.3 DR8 0 6 1.3 LCD_TXOUT0LCD_TXOUT0+ LCD_TXOUT1LCD_TXOUT1+ 1.2 1.3 NR7201 4D03WGJ0470T5E 1.
A B C D E F G H JACK SCHEMATIC DIAGRAM FROM INTERFACE_HDMI IC 8 8 HDMI_A_IN_L HDMI_A_IN_R (SCALER PCB) W844 TO SCALER SW_AUDIO_L[PC] SW_AUDIO_R[PC] PC/DVI_A_IN_L SW_AUDIO_L[PC] W891 7 7 W845 FROM/TO MICOM PC/DVI_A_IN_R HDMI/DVI DVD_RESET START_SW DVD_TX DVD_RX DVD_POWER KEY-A KEY-B YUV_SW SW_AUDIO_R[PC] W892 6 6 TO AV SWITCH1 YUV_Y YUV_U YUV_V VGA-R VGA-G VGA-B TO ADC VGAHS VGAVS 5 C4378 FROM/TO OPARATION/REMOCON FILTER/AC INLET CH 470P C4372 CP2200 (CP2203) A2001WV2-3P GND CH
A B C D E F G H AV SWITCH1 SCHEMATIC DIAGRAM 8 8 (SCALER PCB) SW_G/SW_Y 1K R8146 150 R8143 1K R8103 SW_Y/G SW_PB/B SW_PR/R 7 7 NLCV32T L8105 0 0.7 100 6 BUFFER Q8105 KTA1504S_Y_RTK 0 C8150 5.0 R8145 C8149 150 6.3V 220 V-S B 0.1 R8102 P.CON+5V 22uH C8151 0.7 100 SW_B/SW_CB BUFFER Q8106 KTA1504S_Y_RTK 100P CH 5.
A B C D E F G H REGULATOR SCHEMATIC DIAGRAM 8 8 4 P.CON+5V AT+3.3V 5 P.CON+3.8V 6 P.CON+3.8V 7 GND 8 GND 9 GND 10 P.CON+5V 11 AT+5V 470P CH 470P CH C3207 470P CH C3206 BLM18PG181SN1D B3202 7 P.CON+3.3V P.CON+5V P.CON+5V GND AT+3.3V BLM18PG181SN1D B3203 FROM/TO SCALER P.CON+5V BLM18PG181SN1D B3208 P.CON+3.3V BLM18PG181SN1D P.CON+1.5V GND B3206 GND BLM18PG181SN1D 470P CH 3 FROM/TO ADC LCD+B P.CON+9V 470P CH C3205 P.CON+9V C3201 2 P.
A B C D E F G H INTERFACE_HDMI IC SCHEMATIC DIAGRAM 8 8 (SCALER PCB) SCL 5.0 GND SDA 5.0 4.9 0.1 B C3631 0.1 B C3629 0.1 B C3625 0.1 B 3.3 0 0 0 QO21 QO22 QO23 VSYNC IOVCC RX0+ AVCC QE13 RX1- QE14 RX1+ QE15 IOGND 98 IOVCC AGND QE12 64 97 IOGND AGND RESET# SCDT INT QE23 QE22 QE21 QE20 QE19 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 R3621 3.3 33 0 1.8 DPB6 DPB7 0.1 B DPG0 DPG1 30 3.3 3.
A B C D E F G H HDMI MICON2 SCHEMATIC DIAGRAM 8 8 (SCALER PCB) SW W957 CP3604 A2001WV2-9P 1 VCC 5 NC NC 6 NC NC 7 R3633 4.7K DDVS S 3.3 C3656 100P CH 37 38 R3632 G 10K 100 R3647 39 33 R3634 AUDIO_SEL PROGRAM HDMI MICON 0 IC3611 NC NC SST89E58RD2-40-C-TQJE(HD101) 5.0 VCC 5.0 AKM_ACKS 35 21 NC AKM_PD 3.3 RX2_RST 34 22 HPD_RST RX1_RST 5.0 R3648 LEVEL SHIFT Q3600 KTK5132E 0 0 D 5.6K 43 42 VIDEO_SEL 9 44 NC CSCL CSDA 41 MUTE_CTL 40 GND 8 UC_SDA 6 5.
E F G CP506 A2001WV2-14P 1 +24V TO INVERTER PCB ATTENTION A C553 0.01 B 1200 35V C552C550 MHE 50V 10 R563 0.1 B C577 6.3V 1000 MHE DTV+5V D534 3.9K 1/4W MTZJ27B 0.1 B C581 0.1 B C578 GND 3 DVD+12V 2 DVD+12V 1 FROM/TO POWER P.CON+9V C574 CP510 (CP3802) A2501WV2-2P 9VSC 5 1 GND 2 0.1 B 10K R589 0.47 MHE4.7 50V B C565 R587 R592 P.CON+5V 0.1 B P.CON+12V C575 4.2 P.CON+12V PQ090RDA1SZH D502 9V_REGULATOR GND 24 ST-BY_H GND ADJ 1 2 3 4 9.0 0 1.
A B C D E F G H OPERATION/REMOCON/FILTER/AC INLET SCHEMATIC DIAGRAM 8 (REMOCON PCB) 8 (REMOCON PCB) FROM/TO AV SWITCH2 7 7 Vout 1 GND 2 CD4202 CU256001 R2207 B+ 3 471/4W CP2201(CP4202) A2001WR2-5P G R 6.3V 100 KA C2207 ROM-V338TAO OS2200 STANDBY/POWER D544 LTL-1BEFJ-002A REMOCON IN 1 GND 2 AT+5V 3 STANDBY LED 4 POWER ON LED 5 6 6 PCBDA0 CEF182 5 5 (OPERATION PCB) FROM/TO JACK CP2203 (CP2200) A2001WR2-3P KEY A R2205 R2201 R2202 R2203 5.6K 2.2K 1.2K R2206 0.
WAVEFORMS TUNER ADC 2.0ms 20ns 1.0V 1 2.0V 20µs 1.0V 6 11 SOUND AMP/HEADPHON AMP 2.0ms 500mV 2 STEREO 2.0ms 2.0V 2.0ms 500mV 7 12 AV SWITCH2 2.0ms 500mV 3 100µs 2.0V 2.0ms 500mV 8 13 MICON 2.0ms 2.0V 4 100µs 50ns 500mV 2.0V 9 14 SCALER 2.0ms 2.0V 5 20µs 500mV 20µs 500mV 10 15 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 20µs 500mV 1.0ms 500mV 16 21 26 20µs 1.0V ADC 20µs 500mV 5µs 10µs 500mV 2.0V 17 27 22 ADC 20µs 5µs 200mV 2.0V 18 5µs 500mV 23 28 LVDS 20µs 200mV 10ms 100mV 19 24 5µs 500mV 29 JACK 20µs 200mV 20 INTERFACE_HDMI IC 1.0ms 1.0V 20µs 1.0V 25 30 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 20µs 1.0V 20µs 1.0V 20ns 1.0V 31 36 53 ASIC 20µs 1.0V 10ns 50mV 32 37 200ns 1.0V 54 MEMORY AV OUT 5µs 2.0V 33 20ns 5ns 500mV 50mV 38 55 MPEG/MICON/DSP AUDIO/VIDEO 5µs 2.0V 500µs 500mV 10ns 100mV 34 56 51 5µs 2.0V 500µs 500mV 5ns 20mV 35 57 52 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 10µs 200mV 59 10µs 200mV 60 REGULATOR 2 2µs 2.0V 61 2µs 2.0V 62 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
MECHANICAL EXPLODED VIEW 208 208 208 204 129 115 102H 208 208 208 204 208 102D 208 102F 102B 102B 102C 102E 102F 102A 102H 208 102K 102I 208 102L 208 205 208 201 208 102G 208 201 102E PCB270 (OPERATION 2 PCB ASS'Y) 201 201 201 201 201 137 116 PCB270 (OPERATION 1 PCB ASS'Y) 201 113 101F 128 101I 101H 201 201 101B 201 PCBDA0 (REMOCON PCB ASS'Y) 101D 201 101G 101J 101A 101F 101H 101H 101C 101I 101H 101E 101G 101J 101 J1-1 114 201
MECHANICAL EXPLODED VIEW 104D 201 104D 201 104D 104D 201 202 209 202 201 104B 120 201 104D 104C 202 202 212 209 104A 202 104 103B 103A 130 207 103A 202 207 207 103C 124 207 207 107 103 207 203 207 122 206 207 207 207 127 207 105 207 PCBDH0 (DIGITAL PCB ASS'Y) 106 PCB240 (POWER PCB ASS'Y) 211 211 211 211 127 119 206 207 203 206 207 PCBDS0 (SCALER PCB ASS'Y) 207 118 126 207 206 210 210 211 207 207 207 211 121 207 209 111 213 207 207 210 207 209 PCBD20
MECHANICAL EXPLODED VIEW (PACKING DIAGRAM) POLYBAG INSTRUCTION, INSTRUCTION BOOK (E/F/S), REGISTRATION CARD TM101 INSTRUCTION BOOK KIT PACKAGE TOP CD3810 HOLDER CORD PACKAGE TOP PACKAGE STAND-TOP PACKAGE STAND-BOTTOM PACKING SACK SCREW SHEET INFORMATION LAMIFILM BAG SHEET BARCODE (7230008185) GIFT BOX SHEET BARCODE (7230008185) PACKAGE BOTTOM PACKAGE BOTTOM SHEET BARCODE (7230008184) J1-3
MECHANICAL EXPLODED VIEW (PACKING DIAGRAM) PACKAGE STAND-TOP SHEET INFORMATION PACKING SACK (791WHA0125) PACKING SACK (791WHA0126) SCREW PACKAGE STAND-BOTTOM J1-4
DVD DECK EXPLODED VIEW 600 608 601 608 CD2001 M2602 603 606 703 Do not replace the parts. Because, minute adjustments are needed if this condition is disassembled further more. If the repair is needed, replace the DVD MECHA ASS'Y. 605 703 702 702 607 AA 605 703 701 602 SW2 604 704 PCB640 (SW PCB ASS'Y) 705 CLASS PART NO. PART NAME GREASE Y315061000 G-555G CD2301 NOTE: Applying positions AA for the grease are displayed for this section.
MECHANICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
DVD DECK REPLACEMENT PARTS LIST REF. NO. PART NO. ! 600 A5X002C650 DVD MECHA ASS'Y A5X002C650 601 602 603 604 605 606 607 608 92SBB0033A 92AAA0017A 92P100088A 92P100117A 92P200017A 92P200018A 92P100116A 800WFAA008 LOADER SUB ASS'Y FEED RACK ASS'Y GEAR,MOTOR GEAR,MIDDLE INSULATOR, F INSULATOR, R GEAR,FEED CUSHION C DLM1D29-31 701 702 703 704 705 92P700007A 814011723U 816112080U 813381750U 811022080U SCREW,GEAR FEED SCREW,PAN SEMS.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO. DESCRIPTION *** COILS *** L502 L503 L504 L505 ! L506 ! L507 02186I6R8L 02186I6R8L 021W0G330M 021W0G100M 029X000144 029X000144 COIL COIL COIL COIL COIL,LINE FILTER COIL,LINE FILTER 6.8 UH 6.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
ELECTRICAL REPLACEMENT PARTS LIST RESISTOR RC................... CARBON RESISTOR CC................... CE................... CP................... CPP.................. CPL.................. CMP....................... CMPL................ CMPP................
COPYRIGHT © 2006 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher. Mar.
