Manual

Watching TV
You can change channels in several ways.
(]D
INPUT
0
VOL CH
[_3 Virtual MENU
G 9
E8 0N
I Using FLASHBACK on the remote control
unit
Press FLASHBACK to switch the currently tuned
channel to the previously tuned channel,
Press FLASHBACK again to switch back to the
currently tuned channel,
Press FLASHBACK to toggle between the currently
selected input source and the previously selected one.
,_ FLASHBACK will not work if no channel has been
changed after the TV is turned on.
m Using 0 - 9 on the remote control unit
Select the channels directly by pressing buttons 0 to
9.
o The TV allows you to select up to 125 channels (!
to 125), To select a channel, enter a 2 or 3-digit
number.
[ EXAMPLE
To select a 1 or 2-digit channet number
(e.g., Channel 5):
Complete the following steps within 3 seconds,
m Using CHi_/V on the remote control unit
o Press CHi_ to increase the channel number,
o Press CH v to decrease the channel number.
" OH V//X on the TV operates the same as CH/_/V on
the remote control unit.
- VOL + INPUT POWER
CH V/A
Press the 0 button.
,, Complete the step 2 within 3 seconds after the
step 1.
Press the 5 button,
%-_ese
Press ENTER to enter the setting,
,, Channel selection will be made if there is no
operations for 3 seconds,
I Changing channels with CH iX/V on the
remote control unit or CH V/i_ on the TV
Air: Press CH /_ and the channel change in the
order shown below:
2-+3-+, _-+68-+69-+2-+3_.
Press OH V and the channel change in the
order shown below:
3-+2-+69-+68-+, .,-+3-+2,,.
Cable:
Press OH /\ and the channel change in the
order shown below:
1-+2-+3-+_,-+ ! 25-+ 1-+2-+3_,
Press OH V and the channel change in the
order shown below:
3-+2-+1 -+125-+, .,-+3-+2-+1 -+,.,
, When selecting a 1-digit channel number, do not fail to
press the 0 button.
To semect a 3-digit channel number
(e.g., Channel 115):
Complete the following steps within 3 seconds,
Press the 1 button.
,, Complete the step 2 within 3 seconds after the
step 1.
Press the 1 button again.
,, Complete the step 3 within 3 seconds after the
step 2.
Press the 5 button,
(_ -16