Manual

Basic adjustment settings
Automatically adjusts the brightness of the screen,
Press MENU and the MENU screen displays,
Press _1/1_ to select "Picture".
Press _,/1F to select "OPC',
Press _1/1_ to select "On" or "On: Display",
i Off No adjustment
On Automatically adjusts
i On: Dispmay Displays the OPC effect on the screen while
adjusting the brightness of the screen
For a better white balance, use color temperature
correction,
Repeat steps 1 and 2 in C,M,S, (Color
Management System),
Press ,A/V to select "Color Temp,", and then
press ENTER.
Press ,A/T to select the desired level, and
then press ENTER,
High
Mid-High
Middme
Mid-Low
Low
White with Bluish tone
!
White with Reddish tone
,, When set to "On", senses the surrounding light and
automatically adjusts the backlight brightness. Make sure
no object obstructs the OPC sensor, which could affect
its ability to sense surrounding light.
,, When set to "On: Display". OPC effect displays on tile
screen while OPC is adjusting the screen brightness.
Color tone is managed using the six-color adjustment
setting.
Repeat steps 1 and 2 in OPC setting,
Press A/V to select "Advanced", and then
press ENTER,
Press A/Y to select "C,M,S-Hue', and then
press ENTER.
,, You car/select "C.M.S-Saturation" or "C,M,S-
Value" here instead of selecting "C,M,S-Hue".
Press _,/Y to select a specific adjustment
item, Press 4/_ to adjust the item to your
desired position,
For easier viewing, change the viewing depth by
selecting a level for automatically adjusting the dark
portion of an image,
Repeat steps 1 and 2 in C,M,S, (Color
Management System),
Press A/1F to select "Black", and then press
ENTER
Press _/_ to select "On", and then press
ENTER,
Off No adjustment
On For high detail in black portions
C.M.S-Hue
C,l_.S-Saturati0n
C.M.S-Value
This is a standard to adjust the color either
more reddish or more bluish in tone
Increases or decreases the saturation of a
selected color
A higher value makes the image brighter
A lower value makes the image darker
,, For resetting all adjustment items to the factory preset
values, press A/tY to select "Reset", and then press
ENTER.
(_ -23