Manual

Using e×ternai equipment
You can use the INPUT 4 terminal when connecting an HDMI equipment,
HDMI cable
(Cornmercially available)
HDMI equipment
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 35.)
INPUT4
Press MENU and the MENU screen displays,
Press _1/1_ to select "Option".
Press ,A/_' to select "HDMI Setup", and then
press ENTER,
Option
Press _,/V to select the desired item and
press ENTER,
Press A/lV/_/I_ to select the desired setting
and press ENTER,
Signal
Type
Auto/RGB?fCbCr
4:4:4/YCbCr 4:2:2
Select the signal type from
an HDMI terminal Unless
the image quality looks
obviously poer, select Auto
Color Auto/ITU601/ Select the internal color
Matrix ITU709 space conversion method
when an RGB signal is
input. Normally, select
Auto
Dynamic Standard/ Select the signal amplitude
Range Out of standard range Normally, select
Standard
Auto View Enable/Disable Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal
_, Refer to your external equipment operation manual for
the signal type.
HDMI Setup
(_) -31