Manual

Useful adjustment settings
For automatically adjusting the PC image,
E_3 Virtual MENU
© @
FAVORITE CH
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync,
In some cases, however, manual adjustment is needed
to optimize the image,
Press MENU and the MENU screen displays,
Press _l/l_ to select "Setup".
Press MENU and the MENU screen displays,
Press _l/l_ to select "Setup".
Press _,/V to select "Fine Sync,", and then
press ENTER,
Press ,A/_' to select the specific
adjustment item.
Press _,/Y to select "Auto Sync,", and then
press ENTER,
Press _/_ to select "Yes", and then press
ENTER,
Auto Sync. starts and "Now adjusting the
image" displays.
Press _l/l_ to adjust the item to your
desired position,
,, For resetting all adjustment items to the factory preset
values, press A/T to select "Reset", and then press
ENTER.
,, When Auto Sync. is successful. "Auto Sync completed
successfully" displays. If not. Auto Sync. failed.
,, Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
,, Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
,, Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Centers the image by moving it to the left
or right.
H-Pos.
Centers the image by moving it up or
VoPos. down
Cmock Adjust when the image flickers with vertical
stripes.
Phase Adjust when characters have low contrast
or when the image flickers
Q -34