Manual

Usefum adjustment settings
DVminput signam setting
Press mNPUTto select INPUT5.
Press MENU and the MENU screen displays,
- VOL + _ C_4 /', _ • POWEr{
mNPUT button
Selecting input source
Use this menu to select the input source,
Press iNPUT,
,_ A list of selectable sources appears,
Press iNPUT again to select the input source,
An image from the selected source
automatically displays,
,_ You can also select the input source by
pressing A/I¥.
If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand,
input signal type
For setting the signal type of external equipment
connected to INPUT 1, 2 or 5 terminals,
Press 4/1_ to select "Option".
Press ,A/?' to select "Input Select", and then
press ENTER,
Press ,A/T to select the equipment
connected to INPUT 5 terminal, and then
press ENTER,
Press MENU and the MENU screen displays,
Press _1/1_ to select "Option",
Press ,A/T to select "Input Select", and then
press ENTER,
Press ,A/T to select a signal type you want
to set, and then press ENTER
,, If the selected signal type is incorrect, an image
does not display or no color image displays.
,, If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
,, Check tile operation manual of the external equipment
for the signal type.
,, Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
Q -35