Manual

IMPORTANT SAFETY iNSTRUCTiONS
,, Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges,
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
GROUND,
_- _ POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC NATIONAL ELECTRICAL CODE (NEC ART 250, PART H)
J
'_ O prevent fire, never place any type of candle or flames on the top or near the TV
set,
f
[urn off tile main power and unplug tile AC cord from the wall outlet before handling.
,, Use a soft cloth and gently wipe the surface of the display panel, Using a hard
cloth may scratch the panel surface.
,, Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
,, If tile panel is dusty, use an anti-static brush, which is commercially available, to
clean it,
,, ]_ protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to
Q-5