Manual

Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.
o Do not remove the stand from theTV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
o Before performing work make sure to turn off the TV.
o Before performing work spread cushioning over the base area to lay the TV on, This will prevent it from being
damaged.
Unfasten the four screws used to secure the
stand in place.
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of
the base area,)
J
]b attach the stand, perform the above steps in reverse order.
, mnstaHing the TV requires speciam skHm that should only be performed by qualified service personnem. Customers
shoumd not attempt to do the work themsemves. SHARP bears no responsibility for improper mounting or mounting
that resumts in accident or injury.
Using an optional bracket to mount theTV
o You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall,
o Carefully read the instructions that come with the bracket before beginning work,
f
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details,)
Vertical mour/tinc
Angular mountinc
Q -54