Manual

QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries in the remote control unit,
1 Open the battery cover, 2 Insert two "AAA" size batteries 3 Close the battery cover,
(supplied with the product),
%
,, Place the batteries with their terminals
corresponding to the (k) and ( )
indications in the battery compartmer/t,
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
o Do not mix batteries of different types. Different types of batteries have different characteristics.
o Do not mix old and new batteries. Mixing old and new batteries can shorten tile life of new batteries or cause
chemical leakage in old batteries.
o Remove batteries as soon as they are worn out. Chemicals that leak from batteries can cause a rash. If you
find any chemical leakage, wipe thoroughly with a cloth.
o The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
o If you will not be using tile remote control unit for an extended period of time, remove batteries from it.
IMPORTANT:
The POWER indicator on the AQUOS television
should light GREEN indicating you have power to the
AQUOS television,
If the POWER indicator on
the AQUOS television still
does not light up, press TV
POWER on the REMOTE
CONTROL to turn the power
on,
o o
c_u_ Dw_ Fu
o o
| I raEc
IMPORTANT:
IFTHE UNIT DOES NOT POWER ON- UNPLUG THE
AQUOS TELEVISION FROM THE OUTLET AND
REPEATTHE INSTALLATIONSTEPS.
IFYOU STILL ENCOUNTER NO POWER, PLEASE
CONTACT US AT 1-800-BE-SHARP,
Please refer to the BASIC ADJUSTMENT SETTINGS
SECTION for EZ setup and basic channel setup
functions and USING EXTERNAL EQUIPMENT
SECTION for other device connections (DVD, VCR,
AUDIO, etc) in your AQUOS operation manual
Q-7