ENGLISH FRANÇAIS LC-26SB27UT ESPAÑOL LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LÍQUIDO OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN IMPORTANT : Please read this operation manual before starting operating the equipment. IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo. 37P0131A.
37P0131A.
ENGLISH LC-26SB27UT LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: • To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
IMPORTANT SAFETY INSTRUCTIONS CHILD SAFETY It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
Supplied accessories Make sure the following accessories are provided with the product. LC-26SB27UT Remote control unit (X1) Page 8 “AA” size battery (X2) Page 8 AC cord (X1) Page 7 Cable Tie (X1) Page 7 Stand unit (X1) Page 6 Operation manual (X1) NOTE • Always use the AC cord supplied with the TV. To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning.
QUICK REFERENCE QUICK INSTALLATION TIPS 1 Attach your antenna to the back of the TV. (See page 12.) 2 Connect the AC plug for the TV into the wall outlet. 4 How to turn on the TV for the first time. A) Press POWER on TV. AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. POWER NOTE • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.
QUICK REFERENCE If the remote control fails to operate TV functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AA” size batteries (supplied with the product). 3 Close the battery cover. • Place the batteries with their terminals corresponding to the (+) and (–) indications in the battery compartment. NOTE Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Contents IMPORTANT INFORMATION ................................... 1 DEAR SHARP CUSTOMER ..................................... 3 IMPORTANT SAFETY INSTRUCTIONS .................. 3 Supplied accessories ............................................. 6 QUICK REFERENCE ................................................ 6 Attaching the stand .............................................. 6 Contents ................................................................... 9 Part names .....................................
Part names TV (Front) Remote control sensor TV (Left) POWER indicator Volume (VOL–/+)/ ◀/▶buttons Channel /▲ button Channel /▼ button MENU button INPUT/ENTER button POWER button TV (Rear) INPUT 6 terminals OUTPUT terminals INPUT 2/3 terminals ANT./CABLE in INPUT 1 terminals AC INPUT INPUT 4 terminal INPUT 5 terminal NOTE 10 • The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations. 37P0131A.
Part names Remote control unit 1 10 1 2 3 11 12 POWER: Switch the power on or enters standby mode. (See page 14.) 2 0–9: Set the channel. (See page 14.) 3 • (DOT): (See page 14.) 4 FREEZE: Set the still image. Press again to return to normal screen. • The still image automatically goes out after 30 minutes. 5 SLEEP: Allows you to set a time when the TV automatically switches to standby. Each time you press this button, the remaining time setting switches by 10 minutes up to 2 hours.
Preparation Using the remote control unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. Cautions regarding remote control unit • Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity. • Do not install or place the remote control unit under direct sunlight.
Using external equipment You can connect many types of external equipment to your TV like a DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. Displaying an external equipment image To view external source images, select the input source from “Source Selection” menu using 0–6 on the remote control. Source Selection 0.TV 1.Input1 2.Input2 3.Input3 4.Input4 5.Input5 6.Input6 [0-4]:Select • Each time INPUT is pressed, “Source Selection” item toggles.
Watching TV Turning off the power Preparation Perform the following steps before you press POWER on the remote control unit. 1 Insert the batteries into the remote control unit. (See page 8.) 2 Connect the antenna cable to the TV. (See page 12.) 3 Plug in the AC cord to the AC outlet. (See page 7.) Turning on the power Press POWER on the TV, or POWER on the remote control. TV status indicator (POWER) ON Lighting (Green) OFF/Standby Lighting (Red) • POWER indicator (Green): The TV is on.
Watching TV Auto Ch Memory Display the channel information Auto Ch Memory makes the TV look for all channels viewable in the set area. Press DISPLAY to display the current channel (or input source) information on the screen. When the TV receives a digital signal, the digital information will appear for a few seconds. 1 Press MENU and the MENU screen displays. 2 Press ▲/▼ to select “Channel”, then press ▶ or ENTER. Press ▲/▼ to select “Auto Ch Memory”, then press ▶ or ENTER.
Watching TV Selecting the digital audio language When two or more audio languages are included in a digital signal, you can select one of the audio languages. 1 In digital TV mode, press AUDIO and the “Audio Language” menu screen displays. 2 Press ▲/▼ or 0-6 to select your desired language. 3 Press EXIT to return to the normal screen. NOTE • Digital audio is active only when receiving digital boardcasting, not when receiving analog boardcasting. View mode for 4:3 programs 1 Press VIEW MODE.
Watching TV Favorite channel setting This function allows you to program 4 favorite channels in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. Programming favorite channel 1 Select the channel you want to register as a favorite channel. 2 Press MENU, then press ▲/▼ to select “Channel”, 3 4 5 6 then press ▶ or ENTER. Press ▲/▼ to select “Favorite Ch”, then press ▶ or ENTER. The Favorite Ch menu will appear.
Watching TV Closed captions and digital closed captions NOTE • Closed Caption might not appear according to the condition of the signal from the broadcasting station. Your TV is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subtitles on your TV. Closed Captions are available on some TV programs and on some VHS home video tapes at the discretion of the program provider.
Watching TV Caption setup This function allows you to adjust the closed caption screen appearance to suit your preference. 1 Press MENU and the MENU screen displays. 2 Press ▲/▼ to select “Setup”, then press ▶ or 3 4 5 6 7 ENTER. Press ▲/▼ to select “Closed Caption”, then press ▶ or ENTER. The Closed Caption menu displays. Press ▲/▼ to select “Digital CC Preset”, then press ◀/▶ to select “Custom”. Press ▲/▼ to select “CC Advanced”, then press ▶ or ENTER.
Watching TV Parental control (V-CHIP) V-CHIP might not function according to the condition of the signal from the broadcasting station. V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV.
Watching TV Canadian rating systems • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes into consideration other program content like language, nudity, sexuality and mature themes.
Other convenience functions Menu operation buttons Quick guide for MENU operation Use the following buttons on the remote control to operate the menu. example : Select Language 1 Press MENU and the MENU screen displays. Main Menu Picture >> Audio Channel Lock Setup ENTER : Set : Select 2 Press ▲/▼ to select “Setup”, then press ▶ or ENTER. Press ▲/▼ to select “Language”.
Other convenience functions Icon Picture Selected item Picture Setting AV Mode View Mode Film Mode PC Setting* (see page 24) Brightness / Contrast / Sharpness / Color / Tint Color Temperature Backlight Sports Standard Movie For a movie. Memory Allows the user to customize settings as desired. You can set the mode for each input source. See page 16. A smoother motion may be obtained by setting the Film Mode to “On” when you view a DVD from the DVD player.
Connecting a PC (Personal computer) Viewing an image from a PC Use the INPUT 6 (PC) terminals to connect a PC. (When you use HDMI cable, use the INPUT 4 (HDMI 1) terminal.) NOTE • The PC input terminals are DDC1/2B-compatible. • Refer to “PC compatibility chart” for a list of PC signals compatible with the System. • Make sure to select the same signal values for the output signal of a PC and the input signal of the TV set before connecting with the PC. (See page 23.
Appendix Troubleshooting Problem • No power • Unit cannot be operated. • Remote control unit does not operate. Possible Solution • Check if you pressed POWER on the TV,or on the remote control unit. (See page 14.) • Is the AC cord disconnected? (See page 7.) • Has the power been turned on? (See page 14.) • External influences such as lightning, static electricity, may cause improper operation.
Appendix Specifications Item LCD panel Resolution TV TV-standard (CCIR) Function Receiving VHF/UHF Channel CATV Digital Terrestrial Broadcast (8VSB) Digital Cable*1 (64/256 QAM) Audio multiplex Audio out Terminals Rear INPUT 1 INPUT 2 Dimension*2 (W x H x D) 1-135ch (non-scrambled channel only.) BTSC System 5.
Calling for Service For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.