Operation Manual

1919
Connecting the TV to the Internet
CONNECTING THE TV TO THE INTERNET
Connecting your TV with an ethernet/LAN cable:
1) Plug in your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Ethernet
port
2) Press Menu on the remote control. (fi g.1)
3) Scroll through the menu and select and enter the ‘Network’ menu.
4) In ‘Network Confi gurations’, select ‘Cable’.(fi g.2).
5) Set will automatically confi gure itself.
6) Exit the menu by pressing ‘EXIT’ on the remote control.
Connecting your TV with a wireless connection
If you decide not to follow this and need to connect at a later date please follow these simple steps
below:
1) Press Menu on the remote control (fi g.1).
2) Scroll through the menu and select and enter the ‘Network’ menu.
3) in the ‘Network’ menu, example below, scroll down through the menu and select ‘Wi-fi Confi g’ (fi g.2).
4) Within the ‘Wi-Fi confi g’ options, highlight and select ‘Wi-Fi Auto Search’.
5) The TV will then automatically search for Networks.
6) Select the preferred type of network connection then enter the Network password.
7) Then the TV will establish a connection.
Note: An icon will appear in the top right hand side of the ‘Application’ menu to show you if the TV is
connected to the internet.
When you fi rst power on your new Smart TV there will be an option to follow various on-screen set up
instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an ethernet cable.
fi g.1
fi g.2
User Guide - SHA-MAN-0005 - SmartTV - LC 32,40,43,49,50 inch models.indd Sec1:19User Guide - SHA-MAN-0005 - SmartTV - LC 32,40,43,49,50 inch models.indd Sec1:19 05/08/2015 10:27:1205/08/2015 10:27:12