Manual

Watching TV
Digital Cable Module is called CableCARD TM. By attaching the CableCARD, you can receive various digital
services provided by your Cable Company, To obtain and use a CabbCARD you need to first submit an
application,
Please contact your cable company to discuss receiving an application,
,, If your cable company does not have CableCARD available, you must connect to the cable-TV set4op box via component
video or DVI in order to receive HDTV programs. (See page 55,)
[] When you change your address (See page 89.)
[] About EAS (Emergency Alert System) (See page
89.)
Turn on the power of the TV.
Connect the antenna cable to DIGITAL
CABLE IN,
Insert the CableCARD (upper side facing
right) into the CabieCARB slot,
,_ A message will appear on the screen. (It might
take a couple of minutes before the message
appears.) Call the number on the screen and
tell the operator the CableCARD ID and Host
ID numbers displayed on the screen.
,, Do not insert any PCMCIA card other than CabbCARD
into the CabbCARD slot.
,, Please do not pull the AC cord out whib the CabbCARD
is inserted.
,, After inserting the CableCARD, it may take several minutes
before video output from the selected channel appears
on screen,
I If the above procedure does not work,
please follow the following steps instead.
Press MENU and the MENU screen displays,
Press I/il_ to select "Digital Setup", A/Y to
select "CableCARD Menu", _/V to select
"Pairing Information", and then press
ENTER
,, The words "Pairing Irfformation" may be
replaced by a different expression depending
on the manufacturer of the CableCARD.
A message will appear on the screen, Call
the number on the screen and tell the
operator the CableCARD ID and Host ID
numbers displayed on the screen,
,, If there is a white triangle at the right side of
the screen, the screen is not showing the entire
message. Press A/_' on your remote control
to display the rest of the message.
,, When there is a "LINK" button on the screen,
there is a link to the next page. Press ENTER
to go to the next page.
Removing CableCARD
_} Turn on the power of the TV.
(2} Check that the CabbCARD upgrade screen is not
displayed. If it is displayed, wait until it disappears,
5} Remove the CabbCARD.
Disconnecting the cable antenna
(1_)Turn on the power of the rv.
_} Check that the CableCARD upgrade screen is not
displayed. If it is displayed, wait until it disappears,
{3} Disconnect the cable antenna,
Q -37