Manual

Basic adjustment settings
Channel search Channel memory setting
Channel auto search makes the TV look for all channels
viewable in the set area, Press MENU and the MENU screen displays.
Press MENU and the MENU screen displays.
Press _/_ to select 'Setup".
Press _/_ to select 'Setup".
Press ,A/V to select 'CH Setup", and then
press ENTER
,, It you already set the Secret No., input the 4-
digit secret number here, See page 77 for
setting a secret number.
Press ,A/V to select "CH Search", and then
press ENTER,
Press _/_ to select "Yes" for ANALOG, then
press V to move down.
Press 4/_ to select "Yes" for DIGITAL (Air),
then press V to move down.
Press _1/_ to select "Yes" for DIGITAL
(Cable), and press T to move down.
Select "Search Start", and then press
ENTER,
!!
Example: OH Search
Press ,_/V to select "CH Setup", and then
press ENTER,
,, If you already set the Secret No., input the 4-
digit secret number here. See page 77 for
setting a secret number,
Press ,A/T to select "CH Memory", and then
press ENTER,
Press ,&/T to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER,
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
_} Press A/T, and then press .,q/_ to select
the channel to skip or not.
{2} Press A/T to select "Skip", and then press
41/1_to select "On" or "Oft".
When viewing DIGITAL broadcasts:
_1_Press &/?' to select the channel to skip or
not, and then press .,q/_ to select "On" or
"Oft".
,_ On: Skips channels. (Channel selection disabled using
cHA/V.)
, Off: Does not skip channels. (Channel selection enabled
using cl4i_/V.)
!1
Make sure what kind of connection is made with your TV,
!!
,, Make sure what kind of connection is made with your TV.
Q -41