Manual

Basic adjustment settings
In order to receive digital air broadcasts, you need a
digital broadcast antenna, You can confirm the antenna
configuration through the "Antenna Setup - DIGITAL"
screen,
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength,
Signal Strength
Press MENU and the MENU screen displays.
Press -,_/_ to select "Setup".
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby,
Press MENU and the MENU screen displays.
Press -,_/_ to select "Setup".
Press _/T to select "Standby Mode", and
then press ENTER,
Press Ak/T to select "Antenna Setup -
DIGITAL", and then press ENTER,
,_ If you already set the Secret No., input the 4-
digit secret number here, See page 77 for
setting a secret number.
Press _/V to select "Signal Strength",
,, The signal strength of the DIGI rAL (Air) antenna
is displayed. The signal information is based
on the current channel,
Signal Strength
Press _/V to select "Model" or "Mode2",
and then press ENTER,
Model Starting TV is quick from standby.
Mode2 Power consumption is small at the
standby,
Channel Strength
,_ The channel signal strength can also be checked
separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup - DIGITAL - Air.
Press ,A/T' to select "Channel Strength", and
then press ENTER,
Input the 2-digit channel number to check
the signal strength of the selected channel,
,_ Make sure the appropriate signal strength of
each channel received is obtained,
', Tills function is available for DIGIrAL (Air) only,
(_ -42