Manual

Usefum adjustment settings
,, Some input signals may have to be registered manually
to display properly.
,, The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will dispby when the same signal (resokltion) is input
again,
,, You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input si nals listed above.
-- FAVORITE CH --
Produces a clearer video image.
Press MENU and the MENU screen displays,
Press _/_ to select "Option".
Press ,A/V to select "Digital Noise
Reduction", and then press ENTER,
Press _,/T to select the desired level, and
then press ENTER,
Press MENU and the MENU screen displays.
Press _/_ to select "Setup".
Press ,A/V to select "Input Signal" and then
press ENTER
Press ,A/_' to select the desired input signal
on the display,
Example
When listening to music from a music program, you
can set the Liquid Crystal display off and enjoy audio
only,
Repeat steps 1 and 2 in Digitam Noise
Reduction,
Press ,A/V to select "Audio Only", and then
press ENTER,
Press _/_ to select "On", and then press
ENTER,
On Audio is output without screen image
Off Both screen images and audio are output,
Q -70