PIN 09P03-PL-NG 3 TINS-D910WJN2 POLSKI MAGYAR ČESKY SLOVENSKY УКРАЇНСЬКА EESTI INSTRUKCJA OBSŁUGI KEZELÉSI ÚTMUTATÓ NÁVOD K OBSLUZE NÁVOD NA OBSLUHU ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ KASUTUSJUHEND LIETOŠANAS ROKASGRĀMATA NAUDOJIMO INSTRUKCIJA ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ KULLANMA KILAVUZU OPERATION MANUAL ENGLISH TÜRKÇE Wydrukowano w Polsce Készült Lengyelországban Vytištěno v Polsku Vytlačené v Poľsku Надруковано в Польщі Trükitud Poolas Iespiests Polijā Išspausdinta Lenkijoje Τυπώθηκε στην Πολωνία Polonya’da bas
[ 773.0 ] [ 328.9 ] [ 393.8 ] [ 528.0 ] [ 45.0 ] [ 573.0 ] [ 699.2 ] [ ] : LC-32DH77E, LC-32DH77V [[ ]] : LC-42DH77E, LC-42DH77V ] : LC-46DH77E, LC-46DH77V ) : LC-52DH77E, LC-52DH77V : LC-42DH77E, LC-42DH77V LC-46DH77E, LC-46DH77V LC-52DH77E, LC-52DH77V [ 516] [ 200.0 ] [ 103.3 ] [ 200.0 ] [ 143.0 ] [ 85.7] [ 270.2 ] SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse.
OPERATION MANUAL ENGLISH • The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations. • The examples used throughout this manual are based on the LC-32DH77E model. • LC-32DH77E, LC-32DH77V, LC-42DH77E, LC-42DH77V, LC-46DH77E, LC-46DH77V, LC-52DH77E and LC-52DH77V models are compatible with H.264 (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264) compressed broadcasts. Contents Basic adjustment ..............................................
Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of troublefree operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
Introduction Remote control unit B (Standby/On) (Page 10) 2 Buttons for useful operations m (Teletext) ATV: Display analogue teletext (Page 13). DTV: Select MHEG-5 and teletext for DTV (Page 13). k (Reveal hidden Teletext) (Page 13) [ (Subtitle) Switch subtitle languages on/off (Pages 13 and 28). 3 (Freeze/Hold) Press to freeze a moving image on the screen. Teletext: Stop updating teletext pages automatically or release the hold mode.
Introduction TV (Front view) Remote control sensor OPC indicator B (Standby/On) indicator OPC sensor TV (Rear view) 1 16 11 2 4 5 3 6 12 13 * The terminal layout may differ depending on the model. 14 15 7 8 9 10 a (Power) button MENU button b (INPUT SOURCE) button WARNING • Excessive sound pressure from earphones and headphones can cause hearing loss. • Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Preparation Supplied accessories Remote control unit (g1) AC cord (g1) Stand unit (g1) Cable clamp (g1) • LC-32DH77E, LC-32DH77V • LC-42DH77E, LC-42DH77V/ LC-46DH77E, LC-46DH77V/ LC-52DH77E, LC-52DH77V Product shape varies in some countries. Pages 3 and 6 Page 8 Page 5 Page 8 • Operation manual (This publication) • “AAA” size zinc-carbon battery (g2) ... Page 6 Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Preparation Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open the battery cover. 2 Insert two supplied “AAA” size zinc-carbon batteries. • Place batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. 3 Close the battery cover.
Quick guide Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. 1 Preparation n Connect an antenna cable to the antenna terminal (Page 8). 2 3 Power on and run the auto installation Watch TV n Turn on the power using a on n Congratulations! Now you can watch TV. the TV (Page 10). o If necessary, adjust the * The terminal layout may differ depending on the model.
Quick guide Before turning on the power 1 Carefully insert the CI Module in the CI slot with the contact side forward. 2 The logo on the CI Module must be facing outward from the rear of the TV. Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable Supplying power to the antenna You must supply power to the antenna in order to receive digitally/terrestrially broadcast stations after connecting the antenna cable to the antenna terminal on the rear of the TV. 1 Press MENU and the “MENU” screen displays.
Quick guide 6 Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another. Confirm the following before turning on the power E Is the antenna cable connected? E Is the AC cord plugged in? 1 Press a on the TV. • The initial auto installation wizard appears. 2 Setting the OSD language.
Watching TV Daily operation Selecting an external video source Switching on/off Turning on/off the power Press a on the TV. Switch it off by pressing a on the TV. Once the connection is made, press b to display the “INPUT SOURCE” screen, and then press a/b to switch over to the appropriate external source with OK. INPUT SOURCE TV EXT1 EXT2 EXT3 EXT4 HDMI1 NOTE • When turning off the power using a on the TV, EPG data will be lost, and programmed timer recordings will not be performed by the TV.
Watching TV EPG EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/ RADIO/DATA, view detailed information about them, tune to an event currently on-air and set a timer for future events.
Watching TV Selecting a programme using EPG Basic Operation The illustrations on this page are explained using three digit services. E Display/Close the EPG screen EPG [DTV-TV] Today 040 BBC News 24 10 : 00AM - 1 : 00 AM Press EPG.
Watching TV Buttons for teletext operations Teletext Buttons What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Turning Teletext on/off 1 2 Select a TV channel or external source providing a teletext programme.
Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device. • Refer to page 35 for connecting a PC to the TV.
Connecting external devices HDMI connection Y PB (CB) PR (CR) Component connection Example of connectable devices Example of connectable devices E DVD player/recorder E Blu-ray player/recorder E Game console E VCR E DVD player/recorder E Blu-ray player/recorder The HDMI connections permit digital video and audio transmission via a connection cable from a player/ recorder. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality.
Connecting external devices SCART connection Example of connectable devices Example of connectable devices E Decoder E VCR E DVD player/recorder E When using the EXT2 (SCART) terminal If your VCR supports TV-VCR advanced AV Link systems, you can connect the VCR using a fully wired SCART cable.
Connecting external devices Speaker/amplifier connection Connect an amplifier with external speakers as shown below.
Connecting external devices Inserting a CA Card Checking CI Module information In order to receive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV (Page 8). The CI Module and the CA Card are not supplied accessories. They are usually available from your dealers.
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/recorder) using a single remote control unit. NOTE • AQUOS LINK-compatible AQUOS AUDIO speaker system and AQUOS Recorder are scheduled to be on sale after the release of this TV.
AQUOS LINK Connecting an AQUOS BD Player/AQUOS Recorder via the AQUOS AUDIO speaker system Connecting an AQUOS BD Player/AQUOS Recorder only Optical audio cable HDMI-certified cable HDMI-certified cable HDMI-certified cable AQUOS BD Player/ AQUOS Recorder AQUOS AUDIO speaker system AQUOS BD Player/ AQUOS Recorder AQUOS LINK Setup AQUOS LINK Control Set to “On” to enable HDMI CEC functions. 1 Press MENU and the “MENU” screen displays. 2 Press c/d to select “Option”.
AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMIconnected device with a single remote control unit. 1 Open the remote control unit’s flip cover. 2 Press PLAY I to start playback of a title. • See the right column, section “Playback of titles using AQUOS LINK” if you want to start playback using the list of the titles of the AQUOS BD Player/ AQUOS Recorder. 3 Press FWD J to fast forward. Press REV G to reverse. Press STOP H to stop.
Menu operation What is the MENU? • You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”. • The “MENU” enables various settings and adjustments. • The “MENU” can be operated with the remote control unit. Common operations 1 Display the MENU Screen 2 Select an item Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press OK. Press MENU and the “MENU” screen displays.
Basic adjustment Picture Settings Picture Advanced Picture DYNAMIC OPC [Off] Backlight [+14] –16 +16 Contrast [+30] 0 +40 Brightness [0] –30 +30 Colour [0] –30 +30 Tint [0] –30 +30 Sharpness [0] –10 +10 Advanced This TV provides various advanced functions for optimising the picture quality. Y [ 0] f30 e30 G [ 0] f30 e30 Film Mode C [ 0] f30 e30 Active Contrast B [ 0] f30 e30 DNR M [ 0] f30 e30 3D-Y/C Monochrome Reset Range of OPC Picture C.M.S.
Basic adjustment 1 2 Active Contrast Automatically adjusts the contrast of an image according to the scene. DNR Press AV MODE. Each time you press AV MODE, the mode changes. • You can also switch the mode on the “Picture” and “Audio” menu screen by pressing AV MODE. Item “DNR” produces a clearer image (“Off”, “High”, “Middle”, “Low”). NOTE • This function may not be available depending on the input signal type.
Basic adjustment Power Save Settings ECO No Signal Off ECO Energy Save [ Standard] No Signal Off [Disable] No Operation Off [Disable] When set to “Enable”, the TV will automatically enter standby mode if there is no signal input for 15 minutes. • Five minutes before the TV enters standby mode, the remaining time displays every minute. Sleep Timer NOTE • Even if a TV programme finishes, this function may not operate because of interference from other TV stations or other signals.
Basic adjustment Channel Settings Auto Installation E Manual Adjust Configure various settings for each service using the Colour (R, G, B) buttons. Service No. Setup Auto Installation The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital and analogue individually and reconfigure the settings after the initial auto installation has been completed.
Basic adjustment Analogue channel settings Setup Programme Setup Analogue Setting Skip Channels with “Skip” set to “On” are passed over when using Pr/s even if selected while watching the image from the TV. Decoder When connecting a decoder to the TV, you need to select “EXT1” or “EXT2”. You can reconfigure the analogue TV channels settings automatically or manually. NOTE E Additional Search Lock You can block the viewing of any channel.
Basic adjustment Password/Parental lock settings Setup Child Lock Allows you to use a PIN to protect certain settings from being accidentally changed. NOTE E Cancelling the lock Press the MENU button on the TV and set to “Off” to cancel the “RC Control Lock”. Press the MENU button on the remote control unit and set to “Off” to cancel the “Button Control Lock”. • Refer to page 22 for menu operation using the MENU button on the TV.
Useful viewing functions Selecting the picture size Selecting the WSS picture size automatically Selecting the picture size manually You can select the picture size. Selectable picture size varies with the type of signal received. Item (for SD [Standard-Definition] signals) Setup WSS The “WSS” allows the TV to switch automatically among the different picture size. NOTE • Use “WIDE MODE” if an image does not switch to the appropriate picture size.
Useful viewing functions Selecting the recording picture size manually Automatic volume adjustment Option Digital Setup Auto Volume REC Picture Size You can use this menu to set the appropriate picture size for viewing a 16:9 format TV programme on a 4:3 TV. Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. The Automatic Volume Control (Auto Volume) reduces this problem by equalizing levels.
Useful viewing functions Display Settings Time and Title display Channel display Option Time Display You can display the channel information by pressing p on the remote control unit. DTV Mode ATV Mode DTV 001 Audio (ENG) : STEREO Dolby Digital Plus Video : 1080i Subtitle : ENG 1/3 New Information Time Display BBC1 BBC2 ATV 01 PAL I NICAM STEREO Subtitle : Teletext Off New Information * Four digit numbers (e.g.
Other useful features Setting when using external devices Skipping specified inputs Setup Input source settings Option Input Select For setting the signal type of external equipment. Input Skip This setting allows you to skip the SCART, HDMI or RGB input on the Input Source Selection operation. EXT1 (SCART) EXT2 (SCART) Item EXT4 (RGB) HDMI1 EXT1: Y/C, CVBS, RGB EXT2: Y/C, CVBS HDMI2 Yes No HDMI3 NOTE • If no (colour) image displays, try changing to another signal type.
Other useful features Connecting a USB device Photo Mode Connect an USB device to the TV as shown below. Viewing thumbnails Sample • Depending on the USB device, the TV may not be able to recognise the contained data. • Use only alphanumeric characters for naming files. • File names over 80 characters (may vary depending on character set) may not be displayed.
Other useful features Music Mode Slide show E Selecting the BGM File name Demo/Demo1 SONGS CLASSIC SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 SONG_08.MP3 SONG_09.MP3 Playing: SONG_02.MP3 Slide Show BGM: SONG_03.MP3 Time 3:05 3:15 3:02 6:05 4:52 0:00 3:13 3:23 3:33 1:00 / 3:15 Buttons a/b (Cursor) Select a desired item. c (Cursor) Page up. d (Cursor) Page down. 6 Return to the thumbnail selection screen. R button Stop music. G button Play/Pause music.
Connecting a PC Connecting a PC Setting audio input HDMI Connection Option PC HDMI-certified cable PC PC Audio Select HDMI1, 2* or 3 ø 3.5 mm stereo minijack cable When using the EXT4 terminal or HDMI2 terminal, you must select which terminal uses the AUDIO (R/L) jack for analogue audio input. HDMI2* Item HDMI2: When connecting devices (including a PC) with DVI/HDMI cable to the HDMI2 terminal and inputting analogue audio signals from the AUDIO (R/L) jack.
Connecting a PC Item Adjusting the PC image automatically This function enables the screen to be automatically adjusted to its best possible condition when the analogue terminals of the TV and PC are connected with a commercially available DVI/RGB conversion cable, etc. H-Pos.: Centres the image by moving it to the left or right. V-Pos.: Centres the image by moving it up or down. Clock: Adjusts when the image flickers with vertical stripes.
Connecting a PC RS-232C port specifications PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Use an RS-232C serial control cable (cross type) (commercially available) for the connections. NOTE • This operation system should be used by a person who is accustomed to using PCs.
Connecting a PC PC compatibility chart Resolution Horizontal Frequency Vertical Frequency Analogue (DSub) Digital (HDMI) VESA Standard VGA 640 g 480 31.5 kHz 60 Hz ✔ ✔ ✔ SVGA 800 g 600 37.9 kHz 60 Hz ✔ ✔ ✔ XGA 1,024 g 768 48.4 kHz 60 Hz ✔ ✔ ✔ WXGA 1,360 g 768 47.7 kHz 60 Hz ✔ ✔ ✔ SXGA 1,280 g 1,024 64.0 kHz 60 Hz ✔ ✔ ✔ SXGA+ 1,400 g 1,050 65.
Appendix Troubleshooting Problem Possible Solution • No power. • Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press B. • Is the AC cord disconnected? • Check if you pressed a on the TV. • The TV cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging it in after one or two minutes.
Appendix Updating your TV via DVB-T Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. Digital Setup Download Setup Searching for updates* Information Receiver Report Display reports regarding failures and changes for timer settings. Reset If complex adjustments are made so that the settings cannot be restored to normal, you can reset the settings to the factory preset values.
Appendix Specifications Item 32o LCD COLOUR TV, Model: LC-32DH77E, LC-32DH77V LCD panel 32o Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1,920 g 1,080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.
Appendix Item 42o LCD COLOUR TV, Model: LC-42DH77E, LC-42DH77V 46o LCD COLOUR TV, Model: LC-46DH77E, LC-46DH77V 52o LCD COLOUR TV, Model: LC-52DH77E, LC-52DH77V LCD panel 42o Advanced Super View & BLACK TFT LCD 46o Advanced Super View & BLACK TFT LCD 52o Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1,920 g 1,080) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.
End of life disposal A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
Rating table for Child Lock Broadcasted rating Useradjusted rating AGE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Universal viewing ✔ — — — — — — — — — — — — — — Parental approval pref. ✔ ✔ ✔ ✔ ✔ — — — — — — — — — — X-rated ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ Broadcasted rating Universal viewing Parental approval pref. X-rated Universal viewing — — — Parental approval pref.
[ 773.0 ] [ 328.9 ] [ 393.8 ] [ 528.0 ] [ 45.0 ] [ 573.0 ] [ 699.2 ] [ ] : LC-32DH77E, LC-32DH77V [[ ]] : LC-42DH77E, LC-42DH77V ] : LC-46DH77E, LC-46DH77V ) : LC-52DH77E, LC-52DH77V : LC-42DH77E, LC-42DH77V LC-46DH77E, LC-46DH77V LC-52DH77E, LC-52DH77V [ 516] [ 200.0 ] [ 103.3 ] [ 200.0 ] [ 143.0 ] [ 85.7] [ 270.2 ] SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse.
PIN 09P03-PL-NG 3 TINS-D910WJN2 POLSKI MAGYAR ČESKY SLOVENSKY УКРАЇНСЬКА EESTI INSTRUKCJA OBSŁUGI KEZELÉSI ÚTMUTATÓ NÁVOD K OBSLUZE NÁVOD NA OBSLUHU ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ KASUTUSJUHEND LIETOŠANAS ROKASGRĀMATA NAUDOJIMO INSTRUKCIJA ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ KULLANMA KILAVUZU OPERATION MANUAL ENGLISH TÜRKÇE Wydrukowano w Polsce Készült Lengyelországban Vytištěno v Polsku Vytlačené v Poľsku Надруковано в Польщі Trükitud Poolas Iespiests Polijā Išspausdinta Lenkijoje Τυπώθηκε στην Πολωνία Polonya’da bas