Manual

Preparation
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Removing the terminal cover
Display (rear view)
hooks
toward the center of the
Display and remove the
cover toward you.
the two
upper hooks to remove
the cover toward you.
Connecting the system cable and the AC cord to the Display
AC cord (with ferdte core)
(BLACK)
Connect the plug
completely.
(WHITE)
Connect the plug into the terminal
and secure it by tightening the
thumb screws.
System cable
(GRAY)
Connect the plug firmly until the
hooks on both sides click.
Connecting the system cable and the AC cord to the AVC System
"System cable
(BLACK) (WHITE) (GRAY)
AVC System (rear view)
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOTTOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Q-11