Manual

Part names
INPUT3 terminal(VIDEO)°
STANDBY/ONindicator
INPUT3 terminali
POWERbutton CARDindicator
INPUT3terminals(AUDIOL/R)
How to open the door.
RESET*
SYSTEMRESET**
Headphone PCCARDslot
(Whenconnectingheadphones,thesoundfromthespeakersismuted.)
* If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this
case, press RESET, shown in the diagram, lightly with the end of a ballpoint pen or other pointed object.
This will reset the System as shown below.
o AMMODE resets to STANDARD
TV channel returns to initial channel setting (Air:2ch, Cable:l or 2ch)
Twin picture resets to normal
Audio setting initializes
Dolby virtual resets to Off
Image position initializes
**The product may not function when receiving strong noise (e.g. excessive static electricity, power surge or
abnormal voltage due to lightning) or if operations are performed incorrectly. In such case, press SYSTEM
RESET and try operating again.
• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset or secret number. See page XX for clearing the secret number when you
know it. See page XX for initializing to the factory preset values when you forget your secret number.
INPUT 5 terminal (DVI-I)
Antenna (A) Input 5 terminal I
(AUDIO)
Antenna (A) input terminal
m
output terminal Antenna (B)
input terminal
INPUT 4
terminal
(HDMI)
CENTER CHANNEL INPUT
I EXTERNAL SPEAKER terminals
RS-232C DISPLAY OUTPUT 3 terminal
terminal DISPLAY OUTPUT 1 terminal
DISPLAY
OUTPUT 2
• terminal
INPUT
terminal
COMPONENT
1 COMPONENT
videoterminals(Y,PB,PR)
INPUT2 COMPONENT
videoterminals(Y,PB,PR)
DC OUTPUT
terminal
(Terminal for expanded
functionality in the near future.)
j INPUT1 terminal INPUT2 terminal(VIDEO)
_ _ INPUTl terminals(AUDIOL/R)
MONITOROUTPUTterminal(S-VIDEO)
! MONITOROUTPUTterminals(AUDIOL/R)
R-AUDIO-L INPUT2terminals(AUDIOL/R)
MONITOROUTPUTterminal(VIDEO)
Q -18