Manual

Watching TV
Display
Jj ooT f
-- VOL + v OH A INPUT p R R
POWER button
MAiN POWER
POWER indicator
_WER
O O 9
Make sure that the system cable is connected before
turning on the power.
Press MAiN POWER on the Display.
" The POWERindicator onthe Displaylights up red.
Press POWER on the AVC System.
- The System turns the power on.
- The POWER indicator on the Display lights up green and the
STANDBY/ON indicator on the AVC System lights up green.
- If the STAN DBY/ON indicator on the AVC System and the POWER
indicator on the Display still light up red, press TV POWER on
the remote control unit or POWER on the AVC System to turn the
System on.
AVC System
POWER STANDBY/ON indicator
TV TV VCR AUDIO
O O O
CBL/SA z DVD FUNCTION
o o 0
SOURCE LIGHT
REC
oK} cg?
" The initial setup starts when the System powers on for the first time. If the
System has been turned on before, the EZ setup will not be invoked. See
page 27 to try EZ setup from the Setup menu.
Press TV POWER on the remote control unit or POWER button
on the Display.
" The System enters standby mode and the image on the screen disappears.
, Both the STANDBY/ON indicator on the AVC System and the POWER
indicator on the Display change from green to red.
Press MAiN POWER on the Display.
• The POWER indicator on the Display gradually turns off.
- If you are not going to use this System for a long period of time. be sure to
remove the AC cords from the power outlet.
Display status indicator
Off Power off
Red The System is in standby mode.
Green The System is on.
AVC System status indicator
Off Power off
Red The System is in standby mode.
Green The System is on or only the AVC System is on.
, Check if the system cable is connected properly when display indicator flashes red.
Q -24