Manual

Basic adjustment settings
You can run EZ Setup again, even after setting up the
preset channels.
l/oooj
©© ©
Language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU and the MENU screen displays.
Press 4/_ to select "Setup".
Press A/T to select "EZ Setup", and then
press ENTER.
- If you already set the Secret No., go to step 4. If
not, skip to step 5.
Setup
EZ Setup
Input the 4-digit secret number by using 0 9.
Press A/T to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your System
when selecting "Air" or "Cable" for both ANT-A and B.
Press 4/1_ to select "Air" or "Cable" for ANT-
A, then press A/T to move down.
Press 4/1_ to select "Air" or "Cable" for ANT-
B.
Press ENTER to enter the setting.
- Thisoperation makes the System search for both
ANT-Aand B.
- There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one matches
to your system. Select Auto when you do not know
which one to select.
Example
!
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
Press 41/!_ to select "Yes" for ANT-A, then
press ,&/T to move down.
Press ,,q/l_ to select "Yes" for ANT-B, then
press A/T to move down to select "Search
Start", and press ENTER.
Searching TV channels
Example
J ANT-A Air [ 25] Found [ 20] J
!1
J ANT-B Cable [ 2] Found [ 20] J
Q -30
" If no channel is found, make sure what kind of connection is
made with your System and try EZ setup again.
- Make sure what kind of connection is made with your System
when selecting "Air" or "Cable" for both ANT-A and B.