Manual

Useful adjustment settings
For automatically adjusting the PC image.
DD Virtual MENU
FAVORITE CH
Press MENU and the MENU screen displays.
Press 4/1_ to select "Setup".
Press A/Y to select "Auto Sync.", and then
press ENTER.
Press 4/_'- to select "Yes", and then press
ENTER.
• Auto Sync. starts and "Now adjusting the
image" displays.
!!
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
E_Virtual MENU
FAVORITE OH
Press MENU and the MENU screen displays.
Press 4/_'- to select "Setup".
Press A/Y to select "Fine Sync.", and then
press ENTER.
Press A/Y to select the specific
adjustment item.
Press 4/_ to adjust the item to your
desired position.
- When Auto Sync. is successful, "Auto Sync completed
successfully" displays. If not, Auto Sync. failed.
• Auto Sync. may fail even if "Auto Sync completed
successfully" displays.
• Auto Sync. may fail with a PC image composed of similar
patterns or monochrome. If not successful, change the
PC image and try again.
• Be sure to connect the PC to the AVC System and switch
it on before starting Auto Sync.
For resetting all adjustment kems to the factory preset
values, press A/T to select "Reset", and then press
ENTER.
H-Pos.
V-Pos.
Clock
Phase
Centers the image by moving it to the left
or right.
CeRters the image by moving it up or
down.
Adjusts the clock frequency.
Adjusts the clock phase.
Q -66