Manual

Useful adjustment settings
• Some input signals may have to be registered manually
to display properly.
- The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
i 640x400 720x400 1
! 640x480 848x480 I
1024 x768 1280 x 768
- You can only select the "Input SignaF on the Setup menu
when receiving one of the 6 input signals listed above.
BE VirtuaJ MENU
FAVORITE CH
Press MENU and the MENU screen displays.
Press 4/_'- to select "Setup".
Press j,/T to select "Input Signal" and then
press ENTER.
Setup
Produces a clearer video image.
Nrl Virfual MENU
FAVORITE CH
Press MENU and the MENU screen displays.
Press 4/_'- to select "Option".
Press &/Y to select "Digital Noise
Reduction", and then press ENTER.
- Some items may be grayed out. They are not
selectable.
Option
J Digital Noise Reduction [Low] I
Press &/Y to select the desired level, and
then press ENTER.
• "Digital Noise Reduction" is not selectable when channel
Press &/Y to select the desired input signal display shows an input resolution of 720P or 10801.
on the display.
Example
Q -72