Manual

Preparation
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI equipment
HDMI cab!e .
• When using an HDMI-DVl conversion cable, input the audio signal to AUDIO terminal of INPUT 6.
To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment
using an HDMI cable and set the equipment to 1080p output.
When connecting to a PC with an analog RGB terminal. (INPUT 7}
RGB cable
(commercially available)
® 3.5 mm stereo minijack cable
(commercially available)
PC
When connecting to a PC with an NDMI terminal. (INPUT 4, 5 or 6)
HDMI cable
]_ (commercially available)
PC
The HDMI terminals only support digital signal.
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 40 to set PC input signals.
PC Resolution VESA Standard
720 x 400
VGA
SVGA
PC
XGA
640 x 480
800 x 600
1024 x 768
Horizontal Frequency
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.OkHz
kHz
kHz
WXGA 1360 x 768 47.7
SXGA 1280 x 1024 64.0
SXGA+ 1400 x 1050 64.0 kHz
UXGA 1600 x 1200 75.0 kHz
*These 4 formats are not supported by the analog RGB terminal.
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VerticaiFrequency
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
VGA and XGA are registered trademarks of International Business Machines Corp.
(_)- 16
O
O
O
O
O
O
O
O
O
O
O
O
O
O