Manual

Using external equipment
To watch an HDMI or PC-IN equipment image,
select "INPUT4", "INPUTS" or "INPUT6" from
"INPUT SOURCE" menu using INPUT on the
remote control unit or on the TV.
,_elNPUT4
Press MENU to display the MENU screen, and
then press 4/1_ to select "Option".
Press A/V to select "HDMI Setup", and then
press ENTER.
This setting allows you to skip the HDMI or PC-IN Input
on the Input Selection operation.
Press MENU to display the MENU screen, and
then press 4/1_ to select "Setup".
Press A/V to select "Input Skip", and then
press ENTER.
Press A/T' to select the Input (INPUT 4,
INPUT 5, INPUT 6 or INPUT 7) you wish to
skip, and then press ENTER.
Input 4 (HDMI)
Press 4/1_ to select "Yes", and then press
ENTER.
Press MENU to exit.
Press A/V to select the desired item, and
then press ENTER.
Press 4/1_ to select the desired setting, and
then press ENTER.
Auto View
Audio
Select
Enable
Disable
Digital
Analog
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.
Press MENU to exit.
You can set the input terminals to switch by pressing
GAME. Each time GAME is pressed, the input
terminals toggle.
Press MENU to display the MENU screen, and
then press 4/1_ to select "Setup".
Press A/V to select "Select Game Input", and
then press ENTER.
Press A/V to select the Input terminals
connected to the game console, and then
press 4/1_ to select "On".
• After you have set all Input terminals, press
ENTER.
Press MENU to exit.
• Refer to your external equipment operation manual for the
signal type.
• "Audio Select" is only available for INPUT 6.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
,, If you set to "Off" all terminals through Input 1 to Input 7,
"No input selection available" is displayed when GAME is
pressed. In this case, this function will not work.
Q 33