SHARP LC-32SB24U LC--37SB24U LiQUiD CRYSTAL TELEVISION _O_ DDjDOLBYJ JJ,_ _3 D i G | T A L .................................. 1245 IMPORTANT rr_ | '_ : before Please starting read thisoperating operation the manual equipment. NYCE Supplied Accessories Make sure the following accessories ,f are provkJed with the product. LC 32SB24U Lo37sBg4u _ "'" Remote control unit (:_1) Page 7 ,.
IMPORTANq_ To aid reporting in case of loss or theft, please record I Model No.: the TV's model and serial numbers in the space Serial No.: provided. The numbers are located at the rear of the TV. IMPORTANT WARNING: INFORMATION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT INFORMATION DECLARATION OF CONFORMITY= SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32SB24U/LC-37SB24U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp of trouble-free operation of your product, using this product. IMPORTANT Liquid please SAFETY Crystal Television. read the important To ensure safety and many years Safety instructions carefully before INSTRUCTIONS Electricity is used to perform marly useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
iMPORTANT SAFETY iNSTRUCTiONS • Outdoor Antenna Grounding If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some p/otectJon against voltage surges and built up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis
QUICK REFERENCE Before attaching (or detaching) the stand, unplug the AC cord from the AC iNPUT terminal. Before perfo/ming work spread cushioning over the base area to lay the TV on This will prevent it from being damaged. • Attach the stand in the correct direction. Do not remove the stand from the 1_/unless using an optional wall mount bracket to mount it. • Be sure to follow the instructions. Incorrect installation of the stand may result in tbe TV falling over.
QUICK o REFERENCE ,_ t= -= ± ok D 1 Attach your antenna (See page 8.) to the back of the tebvision. 2 outlet.C°nnecttheACplugf°rthetelevisi°nint°theAC :3 Bundle the cords properly with the cable clamp. SJ 4 • Place the TV close to the AC outlet, and keep the power plug within reach How to turn on the television for the first time. A) Press B) The POWER indicator on the front of the television lights GREEN. co POWER "_" ';' on the television.
Preparation To enjoy a clearer picture, use an outdoor antenna. The following is a bdef explanation that are used for a coaxial cable, if your outdoor antenna uses a 75 ohm coaxial cable plug it into the antenna terminal at the rear of the TV set.
Part Names Volume buttons NOL /+) INPUT button 1 -- l l-- button AC INPUTterminal L H_ml POWER AUDIO OUTPUT terminals DIGITAL AUDIO OUTPUT terminal INPUT 6 terminals (PC-IN) INPUT 5 terminals (HDMI) INPUT 4 terminal (HDMI) INPUT 1 terminals SERVICE terminal , INPUT 2 terminals Antenna/Cable in INPUT 3 terminals The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations¸ • The examples used th_'oughout this manual are based
Part Names 1 POWER: Switch sb_ndby. 2 CC: Display captions source. @ 32 :3 12 POWER cc Auolo on or enters from a dosed caption (See page 15.) AUDIO: during 14.) _)_SPLAY SLEEP ,,W_0DE 13 the TV power (See page 12.) Selects the MTS/SAP multi or the audio mode channel audio broadcasts. Set the channel (See page 13.) (See page 4 0-9: 5 • (DOT}: 6 FLASHBACK: Return to the previous external input mode. (See page 14.) 7 VNEW MODE: 8 FREEZE: Set the still image.
Connecting to External Equipment You can connect many types of external equipment to your TV like a Blu-ray disc player, HD DVD player, DVD player, VCR, Digital TV tuner, HDMI equipment, game consde or camcorder. To vbw external source images, select the input source from iNPUT on the remote control unit or on the TV. (See page 13.
Watching _ TV '_' '_ ..... POWER poweron. Press POWER on (Green): the TV The or on the on remote unit to aturn the POWER indicator %/is (After control a few seconds, window appears with sound) _X_ The initial setup starts when the TV powers on for the first time, If the TV has been turned on before, the E7 Setup will not be invoked See page 20 for performing E7 Setup from the Setup menu, POWER (On/Standby) Press power • The The POWER on the TV or on the remote control unit again to turn the off.
Direct Button Operation Mutes the current Press MUTE. sound output. • "r,_" will be displayed on the screen for 30 minutes, and the sound is silenced @@@ @@@ @@@ ®®@ ®@@ _REEZE Within 80 minutes of pressing MUTE, mute can be canceled by using one of the methods below Mute will be canceled ifyou press VOL +/or MUTE.
Direct Button *_1' _s_#_! Operation .... [] MTS/SAP AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. stereo mode The TV has a feature that allows reception of sound other than the main audio for the program. This feature is called Multi channel Television Sound (MTS).
Direct Button Operation Your TV is equipped with an internal Closed Caption decoder. It allows you to view cor/versations, narration and sound dlects as subtFtles on your TV. Closed 1 Press CC. This will p/esent the Closed Caption information display Captions are available on some TV programs and on some VHS home video tapes at the discretion ot the program provider. 2 Press CC while the Closed still o[_ the screen.
Direct Button Operation You can select the screen size. 1 2 Press The The Press You VIEW MODE. View Mode menu displays. menu lists the View Mode options selectable for the type of video signal currently being received VIEW MODE or A/_' whFle the Vbw Mode menu is displayed to sebct a desked item on the menu.
On-Screen Display Menu Example Example [_ Option ,0 _', Item displayed in yellow • This indicates the item currently selected, Press ENTER to go to the adjustment screen for this item _ Item in brackets This indicates the current setting for the item. _1 Item displayed in white This indicates that the item can be selected _ _ Press _/_- to select the desired item. _2_ Press &/T to select the desired item. _1 Press _/D,, to adiust the item.
On-Screen Display Menu Adiusts the picture to your preference following picture settings. Example[ Automatically adjusts the brightness ot the screen. Off: The brightness is fixed at the value set in "Backlight" with the On: Automatically adjusts, On: Display: Displays the OPC effect on the screen while adjusting the brightness ot the screen.
On-Screen Display Menu Automatically detects a film-based source (originally encoded at 24 frames/second), analyzes it then recreates each still film frame for high-definition picture quality. On: Detects, analyzes, converts film source Off: Normal viewing mode You can adjust the sound quality with the following settings.
On-Screen Power Display Menu control setting Example I _ allows You can run EZ Setup again, even after setting up the preset channels. Language: Select from among 3 languages (English, French and Spanish). 33/Location: Select "Home" or "Store" for the location where you plan to install the %/.
On-Screen Display Menu This setting allows you to skip the HDMI or PC-IN Input ("Input 4 (HDMI)", "Input 5 (HDMI)" and "Input 6 (RGB)") on the Input Selection operation. Yes: Skips the input, No: Does not skip input. Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display. Press &IT/_/11_ to select the new name for the input mode. You cannot change labels if the INPUT SOURCE is _V Some input signals may have to be registered manually to display properly.
On-Screen Display Menu Allows you to use a secret number to protect settings from being accidentally changed. V CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree ot control over broadcasts accessed by their children. It allows parents to select programs judged suitable tot child viewing while blocking ones judged not suitable. It does so automatically once you activate the V CHIP feature in your TV.
On-Screen Display Menu [] TV Parental Guidelines Canadkm Rating Systems (Canadian English ratings and Canadian French ratings) The TV lating systems in Canada are based on the Canadian Radio Television and Telecommunications Commission (¢;RTC) policy on violence in television p/ogramming.
On-Screen Display [] Canadian French Menu Ratings Example Example [_ opt_or_ Press A/Y to adjust the item to your desired position. "t_" indicates the item is blocked. Press MENU to exit. E: Exempt programming, G: General: All ages and child/en, contains minimal direct violence, but may be integlated into the plot in a humorous or unreafistic manner.
On-Screen Display Menu If the image does not come in clearly from the external equipment connected to INPUT 1, you may need to change the input signal type setting from the list below: Auto/COMPONENT/VIDEO This function allows you to adjust the closed caption screen appearance to su[t your preference. You can adjust 7 items: "Caption Size", "Font Style", "Foreground Color", "Foreground Opacity", "Background Color", "Background Opacity" and "Character Edge".
On-Screen This setting Digital Display Menu allows you to optimize the settings This function allows software updates by inserting a USB memory device with the update file into the SERVICE terminal on the %/. of broadcasting. To check for the availability of a software update, visit www.sharpusa.com. If you have any questions, please call 1 800 BE-SHARP (800 237 4277). Example [ _] Digital Setup 1 Press MENU to display the MENU screen, press _1/_- to select "Digital Setup".
On-Screen 6 Dudng Display Menu the data checking, "CheckEng" 7 PressENTER bIFnks. to start updating.
Appendix Problem Possible Solution • NO power Check if you pressed POWER on the remote control unit. (See page 12) If the indicator on the %/does not light up, press POWER on the %/ is the AC cord disconnected? (See page 7,) • Has the power been turned on? (See page 12) • Unit cannot be operated • External influences such as lightning, static electricity, may cause improper ope/ation.
Appendix Item Model: LCD panel Resolution Receiving Channel (CCIR) American %/Standard VHF/UHF VHF2 CA%/ ATSC/NTSC System 1 135ch (non scrambled channel only) 13ch, UHE 14 69ch Digital Terresltlal Broadcast (SVSE 2 690h Digitalcable"1 (64/256QAM) Audio multiplex Backlight 1 1_35ch(non scrambled channel only) BTSC System 60,000 hours (at Backlight Standard position) Audio out Terminals Model: LC-87SB24U 37" screen size class Advanced Super View & BLACK TFF LCD (Diagonal Measurement : 37")
it is necessary to set the PC correctly to display Resolution PC VGA Frequency signal Reter to page 21 to set PC input signaFs.
Calling for Service For location of the nearest Sharp Authorized Service, customer assistance, please call 1 800 BE SHARP. LiMiTED CONSUMER SHARP LIMITED either when repair purchaser This for _en removed, the non for commercial To the extent implied. IMPLIED apply or rights se_icer, Sp_iflcally WARRANTIES PURPOSE ARE by ALL this proof or warranties available given to the permitted.
SHARP LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Elect ro_,_cs of Ca_,ada Ltd. (hereinalfer called "Sharp") gives the following express warranty to the first consume_ _urchaser for ths Sharp brand product, when shipped in its origin,el container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that ths product is free, under normal use and maintenance, from any defects in rnalerlal and workmanship.