http://www.sharp-eu.
ENGLISH OPERATION MANUAL ENGLISH • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
Introduction Remote control unit I (POWER) Press to turn the LCD TV on or enter standby mode. SUBTITLE For DTV, press this button to toggle off / between available subtitle languages. For ATV, press this button to toggle off / between available subtitle pages in Teletext. b (INPUT SOURCE) Select an input source. 0-9 DIGIT BUTTONS To select a TV channel directly. SIZE Press this button to change the font size: Full screen, Top half and Bottom half.
Introduction TV (Front view) B (Standby/On) indicator Remote control sensor TV (Rear view) PC IN (VGA / AUDIO) SCART (CVBS Tuner out) Tuner Input HDMI 1 COMMON INTERFACE slot RS-232C IOIOI AV VIDEO and L/R Audio COMPONENT (VIDEO SPDIF OUT Output and L/R AUDIO INPUT) (Digital audio out) Volume buttons 26” Composite (AV IN, AV/LR) USB Headphone Output P( ) Programme (Channel) buttons HDMI 2 Power conntector MENU button INPUT SOURCE button 32” 42” AC IN RS-232C IOIOI POWER button COMMON INTERF
Preparation Supplied accessories Mount the TV base Stand unit and screws 26” 32” 42” 3 x4 26” 32” 42” Cable clamp (x1) Attached in back of the TV. AC cord (x1) Product shape varies in some countries EPG 1. Put the TV face down on a safe surface that is covered by a soft and smooth cloth. 2. Adjust the TV stand to the bottom of the TV. 3. Fasten the screws by using a cross-head screwdriver (Not supplied).
Preparation Installation of batteries 1. Insert two AAA batteries into Remote control. Make sure (k) and (l) are facing the proper direction. 2. Replace the cover. Using the remote control Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may prevent proper operation.
Quick guide Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. 1 2 Preparation Connect antenna cable to the antenna terminal. Power on and run the auto installation Turn on the TV power with a. MENU 75Ω If necessary, insert CA module into the CI slot to watch scrambled broadcasts. Run the initial auto installation.
Quick guide 3. Mode select (TV location setting) 6. Start searching channels Initial Setup Mode select Initial Setup Please select your mode HOME SHOP First, please connect antenna. Channel Scan Scan Skip Scan Start channel scan now? If you skip this setup, the channel scan could be performed in Menu. 0% Back Select Next Back EXIT Exit When selecting HOME mode, go to step 4 to select the scan mode. When selecting SHOP mode, a window pops out to ask your confirmation.
Watching TV Daily operation Turning on/off the power Press on the TV. Switch it off by pressing Selecting external video source on the TV. MENU Once the connection is made, press b to display the INPUT SOURCE screen, and then press <> to switch over to the appropriate external source with OK.
Watching TV EPG (Electronic Programme Guide) EPG is an on-screen guide that displays scheduled digital TV programmes. This guide is not available with analogue channels. You can navigate, select and view programmes. There are two types of EPG, “Now and Next” and “7 or 8 day” EPG. “Now and Next” is always available but the “7 or 8 day” EPG is only available in certain countries.
Watching TV Teletext What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. Select a Teletext language 1. Press MENU on the remote control and press Features ≥ Teletext Language. 2.
TV menu Picture Sound Adjust picture settings Adjust sound settings 1. Press MENU on the remote control and select Picture. This section describes how to adjust sound settings. 1. 2. Press OK or ≥ to enter the list. Press MENU on the remote control and select Sound. 2. Press OK or ≥ to enter the list.
TV menu Use Sound Mode Step 2: Select your country Apart from manually adjusting sound settings, you can use Sound Mode to set your TV to a predefined sound setting. Select the country where you are located. The TV installs and arranges channels according to your country. 1. Press MENU on the remote control and select Sound. 1. Press MENU on the remote control and select TV ≥ Country. 2. Press OK or ≥ to enter Sound and select Sound Mode. 2. Press ≤≥ to select your country. 3.
TV menu EE Single RF Scan EE Analogue Manual Scan If using digital broadcasts, you can check the quality and signal strength of digital channels. This allows you to reposition and test your antenna or satellite dish. This section describes how to search and store analogue TV channels manually. 1. Press MENU on the remote control and select TV ≥ Channels.
TV menu EE Channel Skip EE Channel Edit Channel skip allows you to skip one or more channels when pressing P <> on the remote control to switch between channels. Channel edit allows you to change the channel number or the channel name. 1. Press MENU on the remote control and select TV ≥ Channels. NOTE • You are prompted to enter current password to enter Channels if Channel Block /Parental Guidance / Input Block in the Parental menu is not the default setting. 2.
TV menu EE Assign a channel decoder (For ATV) Features Decoders that decode channels can be connected to SCART. You have to assign the TV channel as a channel to be decoded. Before selecting channels, make sure your TV is connected to SCART. Select the menu display language. 1. 1. Press MENU on your remote control and select Features ≥ Menu language. 2. Press ≤≥ to select your language. 3. Follow the on-screen instructions to exit. Press MENU on the remote control and select TV ≥ Channels.
TV menu 3. Zoom 1 (Not for HD) Scales the classic 4:3 format to 14:9. Press <> to select Time and press OK or ≥ to enter. Menu Picture Sound Features Parental Scales the classic 4:3 format to 16:9. 4. Wide Stretches the classic 4:3 format to 16:9. 5. NOTE Time 2009/01/01 Timer Off Time 16: 52: 38 Off 00: 00: 00 Eco Select • When source input is PC mode, only Full screen and 4:3 are available. • For 4:3 PC input signal, picture format 4:3 and Wide screen are available.
TV menu EE Automatically switch the TV to standby (Sleep timer) EE Select a subtitle language on digital TV channels Sleep timer switches the TV to standby after a defined period of time. When you select a subtitle language on a digital TV channel as described below, the preferred subtitle language set in the TV menu is temporarily overruled. 1. Press MENU on the remote control and select Features ≥ Time. 2. Press OK or ≥ to enter Time. 3. Press <> to select Sleep Timer. 4.
TV menu HDMI overscan When you watch TV via HDMI input source, you could use this function to enlarge the picture. It may have few loss of video content. 1. Press MENU on the remote control and select Features > HDMI Scan info 2. Press ≤≥ to select one of the following: 3. • Select Auto to scan the picture automatically. • Select Underscan to disable. • Select Overscan to activate. Follow the on-screen instructions to exit.
TV menu Parental Set the time interval lock Lock TV channels or connected devices with a four digit code to prevent children from watching unauthorized content. Access Parental menu 1. Press MENU on the remote control and select Parental. 2. Press OK or ≥ to highlight the password box. Menu Picture Password: Sound **** TV Features Parental Eco EXIT Back 3. Enter your password by using the digit buttons on the remote control. If your password is correct, the Parental menu appears.
TV menu Set / Change password 1. Enter your password to access the Parental menu. 2. Press <> to select Set Password and press OK or ≥ to enter. 3. Enter your new password in the New box by using the digit buttons on the remote control. 4. Enter your new password again in the Confirm box. 5. When complete, the TV reruns to the Parental menu. 6. Repeat step 1 to 4 to change password. Clear all parental settings Reset all the settings in the Parental menu. 1.
Connecting a USB device 4. USB function This TV is equipped with a USB connector that enables you to view photos, listen to music, and play videos stored on a USB storage device. Press MENU to display the sub-menu. Select Media Type (Photo/Music/Video) of the file you wish to play. Sort Photo Media Type Music Thumbnail Size Video Your Media Type selection will be displayed at the upper-right corner of the thumbnail browser.
Connecting a USB device Buttons Descriptions G button Select the slide show duration. Y button Select the slide show transition effect. EXIT Return to the previous operation. EE Listen to Music 1. In the Music thumbnail browser, press <>≤≥ to select a music file or a music album. 2. Press OK to play the MP3 file. 3. Use the buttons on the remote control and follow the on-screen instructions to play the MP3 files.
Connecting external devices YPbPr (Component connection) E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Connecting external devices Example of connectable devices Inserting the Smartcard into the CA module E VCR E DVD recorder E When using the SCART 2 Half SCART, which transmits S-Video or CVBS in, and CVBS monitor out. VCD / DVD recorder SCART cable In order to receive coded digital stations, a conditional access module (CA module) and a Smartcard must be inserted in the CI (Common Interface) slot of the TV. The CA Module and the Smartcard are not supplied accessories.
Connecting external devices Connecting a PC Supported display resolutions Digital connection Computer formats (PC) HDMI cable HDMI PC DVI-HDMI cable DVI HDMI Ø 3.5 mm stereo mini jack cable 26” 32” 42” 26” PC 32” 42” Ø 3.5 mm stereo mini jack cable RGB cable HDMI DVI-I DVI-I / RGB conversion cable Ø 3.
Appendix Troubleshooting Problem Possible Solution No picture 1. Connect power cord correctly. 2. Turn on power. 3. Connect signal cable correctly. 4. Press any button on the LCD TV. Abnormal colours Connect signal cable correctly. Twisted picture 1. Connect signal cable correctly. 2. Please use compatible signal. Picture too dark Adjust brightness and contrast. Audio only, no images 1. Please check if input signal is connected correctly. 2. TV-RF signal must not be lower than 50dB.
Appendix Specification Item 26o LCD COLOUR TV, Model: LC-26SH330E 32o LCD COLOUR TV, Model: LC-32SH330E 42o LCD COLOUR TV, Model: LC-42SH330E LCD screen size 26o diagonal 32o diagonal 42o diagonal Number of dots 3,147,264 dots (1366 g 768 g 3 dots) 3,147,264 dots (1366 g 768 g 3 dots) 6,220,800 dots (1920 g 1080 g 3 dots) Video Colour System TV-Standard TV Function Receiving Channel PAL/SECAM/NTSC 3.58/NTSC 4.
Appendix Environmental specifications 26” 32” 42” *1 On-Mode (W) Item Standard 75 W 90 W 160 W *2 Energy-Save-Mode (W) Eco ≥ On 45 W 50 W 90 W *3 Standby-Mode (W) *4 Off Mode (W) Power button *5 Annual Energy Consumption (kWh) *6 A nnual Energy Consumption (kWh) (Energy-Save-Mode) Eco ≥ On 0.3 W 0.3 W 0.3 W 0.29 W 0.29 W 0.29 W 109.5 kWh 131.4 kWh 233.6 kWh 65.7 kWh 73 kWh 131.4 kWh *1 Measured according to IEC 62087 Ed.
Appendix Information on the software license for this product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
32
( 91.6) / [ 91.1] / {97.1} ( 91,6) / [ 91,1] / {97,1} ( 389.8) / [ 389.8] / {503.8} ( 389,8) / [ 389,8] / {503,8} ( 67.9) / [ 67.9] / {90.9} ( 67,9) / [ 67,9] / {90,9} ( 42.7) / [ 43.0] / {51.2} ( 42,7) / [ 43,0] / {51,2} 42” ( 200.0) ( 200,0) 26” ( 100.