Manual

Basic adjustment settings
This TV provides various advanced functions for
optimizing the picture quality.
Press MENU to display the MENU screen, and
then press </I_ to select "Picture".
Press A/T to select "Advanced", and then
press ENTER.
Press A/T to select a specific adjustment
item, and then press ENTER,
• You can select "ColorTemp.", "Black", "3D-Y/C",
"Monochrome", "FilmMode" or "Rangeof OPC".
Press A/T (or </I_) to select the desired
parameter.
• See the table for the selectableparameters.
Press MENU to exit.
For viewing a video in monochrome.
On For viewing in monochrome
Off Normal color
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
On Detects, analyzes, converts film source
Off Normal viewing mode
For a better white balance, use color temperature
correction.
High
Mid-High
Middle
Mid-Low
Low
White with Bluish tone
I
White with Reddish tone
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of + 1G and a minimum of
1G.
Max. 15 through + 16
Min. 16 through +15
Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
On For high detail in black portions
Off No adjustment
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Provides high quality images with minimal dot crawl
and cross color noise.
Standard Normal adjustment
Fast For moving images
Slow For still images
• 3D-Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
Q- 27