Manual

On-Screen Display Menu
3 Press A/Y to select "Software Update", and then
press ENTER.
• If you have already set the Secret No., go to step 4.
4 Input the 4-digit secret number by using 0-9.
5 Press ENTER to start checking the data in the USB
memory device.
7 Press ENTER to start updating.
o The screen becomes dark tot a while until the update
screen can be displayed. Please wait tot the update
screen to appear. Do not unplug the AC cord.
6 During the data checking, "Checking" blinks. !l
Example
o The current version ot the TV so.are and the version
ot the update file on the USB memory device are
displayed. To update the TV software with the update
file, select "Yes", and then press ENTER.
Example
o If the USB memory device is not properly instalbd or the
correct update file cannot be found on the USB memory
device, an error message is displayed.
o Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
• DO not remove the USB memory device or unplug the
AC cord while the software is being updated.
8 When the software is successfully updated, a
screen is displayed indicating that the update
process is cornpleted.
After this screen is displayed, the TV automatically
turns off and then turns on again.
Example
o If the update has failed, check the file in the USB
memory device and try Sotlware Update again.
g After the screen shown below is displayed, press
ENTER.
10 Remove the USB memory device.
26